Data
Sheet
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
ii
S71PL-N MirrorBit
TM
MCPs
S71PL-N_00_A9 December 8, 2006
S71PL-N MirrorBit
TM
MCPs
S71PL256N, S71PL127N, S71PL129N
256/128/128 Megabit (16/8/8 M x 16-Bit)
CMOS 3.0 Volt-only Simultaneous Read/Write,
Page Mode Flash Memory
Data Sheet
Features
Speed
– Flash: 70 ns
– pSRAM: 70 ns
S71PL129NC0
S71PL127NB0
S71PL127NC0
8.0 x 11.6 x 1.2 mm Packages
– 84-Ball Fine-Pitch Ball Grid Array (FBGA)
S71PL256NC0
S71PL256ND0
– 64 Ball Fine-Pitch Ball Grid Array (FBGA)
S71PL129NB0
Speed
– Flash: 70 ns
– pSRAM: 70 ns
Operating Temperature Range
– Temperature Range of –25°C to +85°C
General Description
This document contains information for the S71PL-N MirrorBit MCP product. For detailed specifications, please refer to the
individual data sheets:
Document
S29PL-N
32M pSRAM Type 8
32M pSRAM Type 7
32M pSRAM Type 2
64M pSRAM Type 2
64M pSRAM Type 8
128M pSRAM Type 2
Publication Identification Number (PID)
S29PL-N_00
pSRAM_31
pSRAM_29
pSRAM_19
pSRAM_20
pSRAM_32
pSRAM_15
Publication Number
S71PL-N_00
Revision
A
Amendment
9
Issue Date
December 8, 2006
Da t a
Sh ee t
3.
Ordering Information
The order number is formed by a valid combinations of the following:
S71PL
256
N
C0
HF
W
5B
0
Packing Type
0 = Tray
2 = 7” Tape and Reel
3 = 13” Tape and Reel
Model Number (V
IO
Range, Package Type)
Refer to the Valid Combinations table below
Temperature Range
W = Wireless (–25°C to +85°C)
Package Type & Material Set
HA = MCP BGA, 1.2 mm height, 0.8 mm pitch, Lead (Pb)-free Compliant package
HF = MCP BGA, 1.2 mm height, 0.8 mm pitch, Lead (Pb)-free package
pSRAM Density
B0 = 32 Mb pSRAM
C0 = 64 Mb pSRAM
D0 = 128 Mb pSRAM
Process Technology
N = 110 nm MirrorBit™ Technology
Flash Density
256= 256 Mb
129= 128 Mb (Dual CE#)
127= 128 Mb (Single CE#)
Product Family
S71PL =3.0 Volt-only Simultaneous Read/Write, Page Mode Flash Memory
3.1
Valid Combinations
Valid Combinations list configurations planned to be supported in volume for this device. Consult your local
sales office to confirm availability of specific valid combinations and to check on newly released
combinations.
Table 3.1
Valid Combinations
Base Ordering
Part Number
(2)
Package &
Temperature
Model
Number
4B
S71PL127NB0
4U
4Z
4B
S71PL127NC0
4U
4B
S71PL129NB0
HAW, HFW
4U
4Z
4B
S71PL129NC0
4U
5B
S71PL256NC0
5U
S71PL256ND0
5B
Type 8
Type 2
Type 8
Type 2
TLA084-
8 x 11.6 x 1.2 mm, 84-ball
TSB084 -
8 x 11.6 x 1.2, 84-ball
0, 2, 3
(1),
(2)
Type 8
Type 2
Type 8
Type 7
Type 2
70 ns
70 ns
TLA064 -
8 x 11.6 x 1.2 mm,
64-ball
Packing
Type
pSRAM
Type
Type 2
Type 8
Type 7
Type 2
TLA064 -
8 x 11.6 x 1.2 mm,
64-ball
Flash
Speed
Option
pSRAM
Speed
Options
Package Name
Notes:
1. Type 0 is standard. Specify other options as required.
2. BGA package marking omits leading “S” and packing type designator from ordering part number.
3. Contact factory for availability for any of the OPNs listed since RAM type availability may vary over time.
December 8, 2006 S71PL-N_00_A9
S71PL-N MirrorBit
TM
MCPs
3
MCU
京公网安备 11010802033920号
EEWORLD
