The testability of product design (De sign For Testability. OFT) is also the main content of product manufacturability. From the production perspective, it is also one of the process characteristics o...
As shown in the figure, IN is +5V, which is used by the secondary side of the transformer to feed back to the power IC. Assuming that IN is greater than 5V, TL431 will be turned on, causing the K pole...
After installation (there is a red control in SYSTEM), put the SPCOMM control into the form, compile and pop up the SPCOMM unit file without writing a line of code. It fails to compile, as if a code u...
The INT0 interrupt of 51 has always been normal, but every time a function that generates a rectangular wave is called, the microcontroller does not enter the interrupt program even if there is an int...
I recently bought a few ATMEL memory chips from a merchant. I want 128K, but I always feel that it is not as big as the 32K I originally wanted. The chip I have now says: ATMEL316 24C256N SI27A. The b...
As for crystal oscillators, I have checked many manufacturers, and their worst accuracy is ≤50PPM, which means that there is only an error of 1 pulse in 20,000 pulses. For a 32.768kHz crystal oscillat...
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
Distributed Wireless Communication System (DWCS) uses distributed antennas, distributed processing control, joint signal processing and other technologies to improve the system's spectrum efficie...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
For battery-powered portable devices, in addition to breaking through the limitations of processing power, the performance of portable system power supplies also needs to be continuously improved. ...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]