This document and all information contained herein
is the sole property of Radiall and is subject to the
confidentiality obligations of the recipient.
This document shall not be reproduced or disclosed
to any third party for any purpose whatsoever or used
for manufacturing purposes without prior written
agreement from Radiall.
No intellectual property rights are granted by the
delivery of this document or the disclosure of its content.
The statements made herein do not constitute an offer.
2/21/2014
Confidential
2
Introduction: What is PIM ?
•
Passive Intermodulation (PIM) is a signal distortion that occurs when
signals at several frequencies are transmitted through a passive device
(connector, cable, switch, antennas…) which has some non-linear
response. In return the fundamental frequencies will be distorted and
series of higher order harmonic frequencies will appear in the frequency
domain. If some of these frequencies appear in the receiving band of a
wireless system it will raise the receiver floor noise and reduce the
system performance.
The main sources of intermodulation in wireless systems are the active
devices in transceivers and receivers. Their intermodulation can be
reduced or eliminated by filtering which is not possible for passive devices
inserted in transmission line. Therefore when intermodulation becomes
critical for a system the only solution is to use Low PIM passive devices.
•
2/21/2014
Confidential
5
Talking about work
京公网安备 11010802033920号
EEWORLD
