PRODUCT SUMMARY
SKY65913-11: GNSS Low-Noise Amplifier Front-End Module
with GPS/GLONASS/BDS Pre-Filters and Post-Filters
Applications
Fitness/activity trackers
Action cameras
Personal navigation devices
GPS/GLONASS/BDS radio receivers
RF_IN
LNA
Output
Match
203718B-001
Bias/Enable
VCC
VEN
Smartwatches
RF_OUT
Features
Small signal gain: 15 dB
In-band IIP3: –9 dBm
Low noise figure: 1.8 dB
Low current consumption
Input/output impedance internally matched to 50
Ω
Single DC supply: 1.62 to 3.3 V
Minimum number of external SMT devices required
Small MCM (10-pin, 2.5 x 2.5 mm) package
(MSL3, 260
C
per JEDEC J-STD-020)
Input
Match
Figure 1. SKY65913-11 Block Diagram
Description
The SKY65913-11 is a front-end module (FEM) with an integrated
low-noise amplifier (LNA), and pre- and post-filters designed for
Global Positioning System/Global Navigation Satellite
System/Beidou Navigation Satellite System (GPS/GLONASS/BDS)
receiver applications. The device provides high linearity, excellent
gain, and a low noise figure (NF).
The pre- and post-filters provide low in-band insertion loss and
excellent rejection for the cellular, PCS, and WLAN frequency
bands.
The SKY65913-11 uses surface-mount technology (SMT) in the
form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which
allows for a highly manufacturable and low-cost solution.
A functional block diagram is shown in Figure 1.
Skyworks Green
TM
products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to
Skyworks
Definition of Green
TM
, document number
SQ04–0074.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
November 15, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 204403A
1
PRODUCT SUMMARY • SKY65913-11: GNSS LOW-NOISE AMPLIFIER FEM WITH GPS/GLONASS/BDS PRE-FILTERS AND POST-FILTERS
Ordering Information
Model Name
SKY65913-11: GNSS LNA Front-End Module with Pre-Filters and Post-Filters
Manufacturing Part Number
SKY65913-11
Evaluation Board Part Number
SKY65913-11-EVB
Copyright © 2016 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
204403A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 15, 2016
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
