Individually insulated conductors are laminated to a
PVC backing which can be zipped apart for
branching or discrete terminations
•
See Regulatory Information Appendix (RIA) for
chemical compliance information
(RIA E1 & C1 apply)
Date Modified: May 15, 2009
TS-0084-B
Sheet 1 of 2
Physical
Insulation:
Material: Polyvinyl Chloride (PVC)
Color: Dark Gray Wires on Light Gray Carrier
Marking:
Standard: None
Canadian Option:
AWM 20462 105C 300V VW1 3M NU C
AWM IA 80C 150V FT1 EU <50V
Conductors:
22 AWG 7
×
30 [ 7
×
0.254 ] Tinned Stranded Copper
Electrical
Voltage Rating:
Insulation Resistance:
Characteristic Impedance:
Capacitance:
Inductance:
Propagation Delay:
Velocity of Propagation:
USA: 300V
> 1 × 10
10
Ω/10
ft. [ 3 m ]
Unbalanced: 119
Ω
Unbalanced: 11.0 pF/ft [ 36.1 pF/m ]
Unbalanced: 0.15 μH/ft [ 0.49 μH/m ]
Unbalanced: 1.30 ns/ft [ 4.27 ns/m ]
Unbalanced: 78%
Canada: 150V
EU: <50V
Note: Unbalanced is measured between ground-signal-ground conductors.
Environmental
Temperature Rating:
-20°C to +105°C
Flammability Rating:
USA: VW-1
Canada: -20°C to +80°C
Canada: FT1
UL File No.: E42769, Style No: 20462
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Round Conductor Flat Cable
.100" 22 AWG Stranded, PVC
Number of
Conductors
C
(OPTIONAL)
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
A
B
.034 Ref
[ 0.86 ]
.100 Typ
[ 2.54 ]
8124 Series
3M Part
Number
8124/05
8124/06
8124/07
8124/08
8124/09
8124/10
8124/11
8124/12
8124/13
8124/14
8124/15
8124/16
8124/17
8124/18
8124/19
8124/20
8124/21
8124/21
8124/23
8124/24
8124/25
8124/26
8124/27
8124/28
8124/29
8124/30
8124/31
8124/32
8124/33
8124/34
8124/35
8124/36
8124/37
8124/38
8124/39
8124/40
Dimension A
0.468 ± .015 [ 11.89 ]
0.568 ± .015 [ 14.43 ]
0.668 ± .015 [ 16.97 ]
0.768 ± .015 [ 19.51 ]
0.868 ± .015 [ 22.05 ]
0.968 ± .015 [ 24.59 ]
1.068 ± .020 [ 27.13 ]
1.168 ± .020 [ 29.67 ]
1.268 ± .020 [ 32.21 ]
1.368 ± .020 [ 34.75 ]
1.468 ± .020 [ 37.29 ]
1.568 ± .020 [ 39.83 ]
1.668 ± .020 [ 42.37 ]
1.768 ± .020 [ 44.91 ]
1.868 ± .020 [ 47.45 ]
1.968 ± .020 [ 49.99 ]
2.068 ± .025 [ 52.53 ]
2.168 ± .025 [ 55.07 ]
2.268 ± .025 [ 57.61 ]
2.368 ± .025 [ 60.15 ]
2.468 ± .025 [ 62.69 ]
2.568 ± .025 [ 65.23 ]
2.668 ± .025 [ 67.77 ]
2.768 ± .025 [ 70.31 ]
2.868 ± .025 [ 72.85 ]
2.968 ± .025 [ 75.39 ]
3.068 ± .025 [ 77.93 ]
3.168 ± .025 [ 80.47 ]
3.268 ± .025 [ 83.01 ]
3.368 ± .025 [ 85.55 ]
3.468 ± .025 [ 88.09 ]
3.568 ± .025 [ 90.63 ]
3.668 ± .025 [ 93.17 ]
3.768 ± .025 [ 95.71 ]
3.868 ± .025 [ 98.25 ]
3.968 ± .025 [ 100.79 ]
Dimension B
0.400 ± .010 [ 10.16 ]
0.500 ± .010 [ 12.70 ]
0.600 ± .010 [ 15.24 ]
0.700 ± .010 [ 17.78 ]
0.800 ± .010 [ 20.32 ]
0.900 ± .010 [ 22.86 ]
1.000 ± .015 [ 25.40 ]
1.100 ± .015 [ 27.94 ]
1.200 ± .015 [ 30.48 ]
1.300 ± .015 [ 33.02 ]
1.400 ± .015 [ 35.56 ]
1.500 ± .015 [ 38.10 ]
1.600 ± .015 [ 40.64 ]
1.700 ± .015 [ 43.18 ]
1.800 ± .015 [ 45.72 ]
1.900 ± .015 [ 48.26 ]
2.000 ± .020 [ 50.80 ]
2.100 ± .020 [ 53.34 ]
2.200 ± .020 [ 55.88 ]
2.300 ± .020 [ 58.42 ]
2.400 ± .020 [ 60.96 ]
2.500 ± .020 [ 63.50 ]
2.600 ± .020 [ 66.04 ]
2.700 ± .020 [ 68.58 ]
2.800 ± .020 [ 71.12 ]
2.900 ± .020 [ 73.66 ]
3.000 ± .020 [ 76.20 ]
3.100 ± .020 [ 78.74 ]
3.200 ± .020 [ 81.28 ]
3.300 ± .020 [ 83.82 ]
3.400 ± .020 [ 86.36 ]
3.500 ± .020 [ 88.90 ]
3.600 ± .020 [ 91.44 ]
3.700 ± .020 [ 93.98 ]
3.800 ± .020 [ 96.52 ]
3.900 ± .020 [ 99.06 ]
.060
±
.003
[ 1.52 ]
Inch
[mm]
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
.000
±.005
Dark Gray PVC Insulation Typ
22 AWG 7 X 30 [ 7 X 0.254 ] Tinned
Stranded Copper Conductors
Light Gray PVC
Carrier
[ ] Dimensions for Reference Only
Note: Red marking on one edge of cable designates wire #1.
Ordering Information
8124 / XX
Blank = Standard
C = Canadian Certified Version
Number of Conductors
(See Table)
Note: Standard length is 100 ft/roll.
TS-0084-B
Sheet 2 of 2
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part
does not
contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
==S 投票==E 投票
S 文章(这部分加style只是为了看效果,基本上表现都受编辑器设置控制)RC charging calculation method
Reprinted from: http://hi.baidu.com/cumtsun/blog/item/b8ee5f16561cae4e20a4e93c.htmlExample 1 : As shown in the figure, ...
Whether it is high or low, the relay will work. When it is high, the voltage difference between the 3rd and 4th pins of the optocoupler is 10V, and the relay is 24V. Shouldn't it be 0 when it is high?...
Hello everyone, I have a few questions to ask you. I am studying the Bluetooth device of embedded system recently. The CPU used is s3c2443, and the OS is WinCE Platform Builder 5.0. I want to build a ...
Now I have a large constant array const int testdata[1000]. In order to save memory, I want to put it in the code segment. How do I declare it? In the past, in the microcontroller, the bytes were simp...
The problem of HPS accessing the i/o port of FPGA through the HPS-to-FPGA bridge. It is not a lightweight bridge. Has anyone done it before? I have been working on it for two days, but it doesn't work...
Dear heroes, the clock of the crystal oscillator is main_clk. After dividing the clock, we get the AD clock AD_clk. However, in the actual circuit diagram, I connected AD_clk to the pin corresponding ...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
0 Introduction
With the development of society, people pay more and more attention to security work. Monitoring products have been used in various fields instead of being used only in importan...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Editor's note: In order to help technicians or engineers who have knowledge of PIC microcontroller assembly language quickly master the method of using C language to program PIC microcontrollers, t...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
Since the No. 4 blast furnace of Handan Iron and Steel was put into operation in 1993, its external equipment has been seriously aged, and the original PLC control system TDC3000 of the hot blast furn...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
