Product Fact Sheet
F-56 Series
Product Summary
Capacities: 4 GBytes, 8 GBytes, 16 GBytes, 32 GBytes, 64 GBytes, 128 GBytes
Form Factor: CFastTM 2.0 (36.4 mm x 42.8 mm x 3.6 mm)
Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible)
Command Sets: Supports ATA/ATAPI-8 and ACS-2
Performance:
o
Read Performance: Sequential Read up to 510 MBytes/s, Random Read IOPS up to 32,000
o
Write Performance: Sequential Write up to 415 MBytes/s, Random Write IOPS up to 66,000
Operating Temperature Range
*
:
o
Commercial: 0 °C to 70 °C
o
Industrial: -40 °C to 85 °C
Storage Temperature Range: -40 °C to 85 °C
Operating Voltage: 3.3 V ± 5%
Power (Max Capacity): Read (Active): 1.2 W; Write (Active): 2.1 W; Idle: 248 mW; Slumber: 17 mW
Data Retention: 10 Years @ Life Begin / 1 Year @ Life End
Endurance in TeraBytes Written (TBW) Max Capacity
†
: Client > 580; Enterprise > 25
Shock/Vibration: 500
g
/ 20
g
Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page
NAND Flash Technology: Pseudo Single-Level Cell (pSLC)
Mean Time Between Failure: > 2,000,000 hours
Data Reliability: < 1 non-recoverable error per 10
16
bits read
Product Features
Dynamic and Static Wear Leveling
Subpage Mode Flash Translation Layer (FTL)
Active Data Care Management: Read Refresh
Lifetime Enhancements
o
Dynamic Bad Block Remapping
o
Write Amplification Reduction
On-Board Power Fail Protection
AHCI, TRIM, and NCQ Support
ATA Security Feature Set Support
DEVSLP Compatible
In-Field Firmware Update
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
Controlled “Locked” BOM
30 µinch Gold-Plated Connector (on request)
Conformal coating (on request)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)
Why Swissbit?
Swissbit is focused on the design, development, manufacture, and support of leading edge memory and
storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and
addressees the higher level of application requirements of today’s industrial, Netcom, and automotive
customers by providing best-in-class products and services, with uncompromised attention to driving overall
value and quality.
*
†
Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified
maximum operating temperature.
According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the
specified TBW. The values listed are estimates and are subject to change without notice.
Revision: 1.01
Doc-2791
File: F-56_fact_sheet_Rev101
Page 2 of 2
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
ARM Technology
京公网安备 11010802033920号
EEWORLD
