Modular Plug Connectors Compliant to Enhanced Category 5 Standards
TM21P Series (Shielded Type)
TM22P-88P (Non-shielded Type)
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■
Features
1. Supports High-Speed LAN Transmission
Conforms to requirements of TIA/EIA-568B data
wiring standard, meeting transmission performance
of Enhanced Category 5.
Supports Gigabit Ethernet (1000BASE-T) and Fast
Ethernet (100BASE-TX) high-speed LAN
transmission.
Protected latch tab
2. EMI protection (TM21*P-88P)
360
°
coverage of the engagement area with a metal
shield assures protection against electromagnetic
interference. When mated with corresponding
connector the shield surfaces are securely
connected to provide continuous circuit.
3. Protected latch tab (TM21P-88P)
Flexible case extends over the release tab
preventing the possibility of breaking-off during
handling of the complete cable assembly.
4. Termination of conductors
Self located 24 AWG conductors (solid or stranded)
are terminated against pre-inserted contacts using
simple tooling.
1
5. Simplified termination (TM21*P-88P)
Removeable one piece cover allows easy access to
the termination areas.
2
1
6. Conforms to the ISO 8877 Standard
(ISDN Interface Connector)
1
■
Applications
Telecom Hubs, Routers, Bridges and ATM
Transmission Equipment, Ethernet Switches and
Networking Equipment, Test and Measurement
Equipment and other equipment requiring this type of
simple and reliable connection.
Cover Installation Procedure
2008.12
w
1
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Product
Specification
Current rating
Rating
Voltage rating
125 V AC
1A
Operating temperature range-25
ç
to +60
ç
(Note)
Item
1. Insulation resistance
2. Withstanding voltage
(between adjacent contacts)
100 M ohms min.
Specification
100 V DC
Conditions
No flashover or insulation breakdown
No flashover or insulation breakdown
230 m ohms max.
No electrical discontinuity of 5 ms or more
Contact resistance: 250m ohms max.
No electrical discontinuity of 5 ms. min.
Contact resistance: 250m ohms max.
Contact resistance: 250m ohms max.
Contact resistance: 250 m ohms max.
Insulation resistance: 100 M ohms min.
500 V AC / one minute
1500 V AC / one minute
100mA DC
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
Acceleration of 490 m/s
2
, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis
200
Temperature: -55
ç
/+5
ç
to +35
ç
/+85
ç
/+5
ç
to +35
ç
Duration: 30/5/30/5(Minutes)
5 cycles
500 hours at temperature of 40
ç
and humidity of 90% to 95%
Exposed to density 5% salt water for 48 hours
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3. Withstanding voltage
(between contact and shield)
4. Contact resistance
5. Vibration
6. Shock
7. Durability
(mating/un-mating)
8. Temperature cycle
9. Humidity
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
Insulation resistance: 10 M ohms min. (Dry state)
Contact resistance: 250 m ohms max.
10. Salt Spray
Note :Includes temperature rise caused by current flow.
■Materials
Part
Insulator
Contacts
Shield
Conductor holding tray
Cover
Material
Polycarbonate
Copper alloy
Copper alloy
Polycarbonate
Polyamide
Finish
Color: Clear
Contact area: Gold plating
Tin plating
Color: Clear
Color: Light beige (Note)
Remarks
UL94V-2
-------
-------
UL94V-2
UL94V-2
Note :Cover available in various colors. Refer to page 3.
■Ordering
information
●
Plugs- Shielded
●
Plugs - Non-shielded
TM21 C P - 8 8P
1
1
Series name
2
Cover Type
3
Size
4
Inserted contacts
2
1
3
4
TM21P: Shielded
Blank: Protective latch cover
C: Short cover
8: For 8 contacts
8P: 8
TM22P - 8 8P
1
1
Series name
2
Size
3
Inserted contacts
2
3
TM22P : Non-shielded
8 : For 8 contacts
8P: 8
2
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Plug
Connectors
●
Shielded
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
(R
)
3.5
6.7
Cover
6.09
11.7
17.5
12.9
(34)
9
30.2
16.6
29.5
Contact No. 1
(0.6)
6.6
Contact No.8
5.4
9.05
Part Number
TM21P-88P
TM21P-88P(02)
TM21P-88P(03)
TM21P-88P(04)
TM21P-88P(05)
TM21P-88P(06)
TM21P-88P(07)
TM21P-88P(08)
TM21P-88P(09)
CL No.
222-2862-9-02
222-2862-9-02
222-2862-9-03
222-2862-9-04
222-2862-9-05
222-2862-9-06
222-2862-9-07
222-2862-9-08
222-2862-9-09
Cover Color
Light beige
Medium gray
Black
Natural light gray
Red
Green
Blue
Yellow
Orange
RoHS
YES
BCover
installed
BMated
with corresponding receptacle
(shown for reference only)
(34)
(13.4)
(44.65)
3.45
Conductor holding tray
3
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Plug
Connectors
●
Shielded-Short Cover
6.7
17.2
Cover
6.09
11.7
10.4
TM21CP-8
30.2
(22.4)
9
17.5
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
6.6
(0.6)
12.9
(R
3.
Contact No.1
Contact No.8
5.4
9.05
Part Number
TM21CP-88P(03)
CL No.
222-2884-1-03
Cover color
Black
RoHS
YES
Note: For other colors contact Hirose sales representative.
BCover
installed
BMated
with corresponding receptacle
(shown for reference only)
(21.7)
(13.4 )
(32.35)
BApplicable
Shielded Cable Specifications
Specifications
Solid copper conductor: 0.5mm dia.
Jacket
Shield
Insulation
Conductor
TM21CP-8
Conductor
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
Individual conductor insulation dia.
(
0.9mm to 1.0mm
)
Drain wire
Drain wire
AWG#26 (tin coated)
Overall jacket dia.
(dia. 6.6mm)
Note: For cable termination procedures refer to:
[TM21P-88P Cable Termination Procedure Manual] (ETA-E2349) and [TM21CP-88P Cable termination Procedure Manual]
(ETA-E2353).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
4
3.45
Conductor holding tray
5)
TM21CP-8
TM21CP-8
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Plug
Connectors
●
Non-shielded
22.5
6.09
11.7
5.4
9.05
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
14.2
7.9
Contact No.1
(0.6)
6.6
Contact No.8
Part Number
TM22P-88P
CL No.
222-2899-9
RoHS
YES
BMated
with corresponding receptacle (shown for reference only)
(11.85)
BApplicable
Non-shielded Cable Specifications
Specifications
Jacket
Solid copper conductor: 0.5mm dia.
Conductor
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
Individual conductor insulation dia.
Conductor
Insulation
(
0.9mm to 1.0mm
)
Overall jacket dia.
(dia. 5.4mm
to 5.7mm)
Note: For cable termination procedures refer to:
[TM22P-88P Cable Termination Procedure Manual] (ETA-E2381).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
3.45
Conductor holding tray
5
京公网安备 11010802033920号
EEWORLD
