1. 20 MHz bandwidth oscilloscope, 12” of twisted load cables paralleled with 0.1 µF ceramic and 47 µF electrolytic capacitors placed across the terminals at the load.
2. At 230 Vac, 50 Hz, full load.
3. All specifications are measured at Ta=25°C, nominal input voltage, and rated output load unless otherwise specified.
PART NUMBER KEY
VGS-100B
-
XX
Base Number
Output Voltage
cui.com
For more information, please visit the
product page.
CUI Inc
│
SERIES:
VGS-100B
│
DESCRIPTION:
AC-DC POWER SUPPLY
date
09/17/2018
│
page
2 of 5
INPUT
parameter
voltage
frequency
current
inrush current
leakage current
no load power consumption
at 230 Vac input
at 115 Vac input, full load
at 230 Vac input, full load
at 230 Vac, cold start, full load
conditions/description
min
90
47
typ
max
264
63
2.1
1.2
50
3.5
0.4
units
Vac
Hz
A
A
A
mA
W
OUTPUT
parameter
line regulation
load regulation
adjustability
start-up time
rise time
hold-up time
switching frequency
conditions/description
12 Vdc output model
all other models
12 Vdc output model
all other models
built in trim pot
at 115/230 Vac input, full load
at 115/230 Vac input, full load
at 115 Vac input, full load
at 230 Vac input, full load
12
30
65
±10
2
40
min
typ
max
±1
±0.5
±1
±0.5
units
%
%
%
%
%
s
ms
ms
ms
kHz
PROTECTIONS
parameter
over voltage protection
over current protection
short circuit protection
conditions/description
output shutdown, must recycle power to recover
output shutdown, auto recovery
output shutdown, auto recovery
min
120
110
typ
max
145
150
units
%
%
SAFETY & COMPLIANCE
parameter
isolation voltage
conditions/description
input to output for 1 minute, 10 mA
input to ground for 1 minute, 10 mA
output to ground for 1 minute, 10 mA
input to output at 500 Vdc
input to ground at 500 Vdc
output to ground 500 Vdc
IEC/EN 60950-1, UL 60950-1
class I
EN 55032:2015, Class B
EN 55032:2015, Class B
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013, Class A
IEC 61000-4-2, air: ±8 kV; contact: ±4 kV, Class A
IEC 61000-4-3, 3 V/m, Class A
IEC 61000-4-4, Ac power port: 1 kV;
signal & telecommunication ports: 0.5 kV, Class B
100
100
100
min
typ
1,500
1,500
500
max
units
Vac
Vac
Vac
MΩ
MΩ
MΩ
isolation resistance
safety approvals
safety class
conducted emissions
radiated emissions
input current harmonics
voltage fluctuation and flicker
ESD immunity
radiated field immunity
electrical fast transient
immunity
Notes:
1. The power supply is considered a component which will be installed into final equipment. The final equipment still must be tested to meet the necessary EMC directives.
cui.com
For more information, please visit the
product page.
CUI Inc
│
SERIES:
VGS-100B
│
DESCRIPTION:
AC-DC POWER SUPPLY
date
09/17/2018
│
page
3 of 5
SAFETY & COMPLIANCE (CONTINUED)
parameter
surge immunity
conducted immunity
magnetic field immunity
voltage dips, interruptions
MTBF
RoHS
Notes:
conditions/description
IEC 61000-4-5, input L to input N: 1 kV;
input L to FG: 2 kV; input N to FG: 2 kV, Class C
IEC 61000-4-6, frequency range: 0.15~80 MHz;
field strength: 3 Vms, Class A
IEC 61000-4-8, 1 A/m, Class A
IEC 61000-4-11:
voltage dips >95% reduction, 0.5 period, Class A
voltage dips 30% reduction, 25 period, Class B
voltage dips >95% reduction, 250 period, Class C
as per MIL-HDBK-217F, 25°C
yes
min
typ
max
units
200,000
hours
1. The power supply is considered a component which will be installed into final equipment. The final equipment still must be tested to meet the necessary EMC directives.
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website.
Fax 503.612.2383
cui.com
techsupport@cui.com
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Dear experts, how can I set the distance between components and board edges according to the rules? How can I modify the position identification of components at one time? Please give me some advice!...
What does the hiccup mode of a DC DC chip refer to?
The so-called hiccups are generally a cycle of normal output, fault detection and output stop for protection, and then normal output restart after a...
The launching ceremony of the China Nutrition and Health Education Information Project, jointly initiated by the China Health Education Association, the Food Nutrition and Safety Professional Committe...
To sum up, the main ones are as follows 1 ADS debugging is ADS AXD to be exact. ADS contains AXD. Originally, we all used SDT, but ARM stopped supporting SDT and changed to support ADS. So we should s...
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
introduction
At present, measuring instruments are developing towards networking, and each individual embedded instrument will become a node on the Internet. This system realizes the network...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]
This article discusses the six design steps of LED lighting system design in detail: (1) determine the lighting requirements; (2) determine the design goals and estimate the optics; (3) the efficie...[Details]
1 Load Regulation
Changes in power supply load will cause changes in power supply output. When the load increases, the output decreases, and vice versa, when the load decreases, the output inc...[Details]
Current
measurement:
Magnetic balance Hall current
sensor
is used
. The sensor can measure AC from DC to 100kHz.
In automatic measurement and control systems, it is often nec...[Details]
Applying fieldbus technology on new beer production lines is the first choice for large beer companies with strong management level and technical strength. Guangzhou Zhujiang Beer Group Co., Ltd. i...[Details]
For a long time, my country has implemented "community-style collective heating" for hot water heating, and settled accounts based on the heating area, regardless of whether the user uses heat. Thi...[Details]
In recent years, the application of single-chip microcomputer systems in the field of industrial measurement and control has become more and more extensive. However, for industrial sites with harsh...[Details]
In the development direction of the automotive industry, electric vehicles (EV) and hybrid electric vehicles (HEV) are becoming an obvious trend. From a technical point of view, hybrid power is mor...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
