Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 791-1
Shielded Power Inductors – XFL5030
Halogen
Free
•
•
•
•
Exceptionally low DCR – only 2.15 mOhms
Excellent current handling – up to 11.5 A
AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
3.1 mm maximum height with a 5.48 mm × 5.28 mm footprint
Q200
+
125°C
AEC
Core material
Composite
Terminations
RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight
0.42 – 0.50 g
Ambient temperature
–40°C to +125°C with (40°C rise)
Irms
current.
Operating voltage
0 – 20 V
Maximum part temperature
+165°C (ambient + temp rise).
Derating.
Storage temperature
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat
Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)
1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing
Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See
Doc787_PCB_Washing.pdf.
Inductance
2
±20% (µH)
0.27
0.56
1.0
2.2
3.3
4.7
DCR (mOhms)
3
typ
max
2.15
2.55
3.20
3.80
4.20
5.00
10.5
12.0
13.5
16.0
18.5
22.0
SRF typ
4
(MHz)
132
77.0
60.0
37.4
28.7
24.5
Isat
(A)
5
20% drop
11.0
8.5
6.2
4.0
4.0
3.1
Irms
(A)
6
20°C rise 40°C rise
18.0
25.5
14.6
21.0
13.0
28.0
8.2
11.5
7.2
10.0
6.2
8.7
Part number
1
XFL5030-271ME_
XFL5030-561ME_
XFL5030-102ME_
XFL5030-222ME_
XFL5030-332ME_
XFL5030-472ME_
10% drop
10.0
7.5
5.4
3.5
3.1
2.5
30% drop
11.5
9.0
6.5
4.3
4.2
3.3
1. When ordering, please specify
packaging
code:
XFL5030-472MEC
Packaging: C
= 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B
= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25
charge), use code letter C instead.
D
= 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(1500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms
Testing
Irms
testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 791-1
Revised 11/02/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 791-2
Shielded Power Inductors – XFL5030
L vs Current
Inductance (µH)
0.4
0.3
0.2
0.1
0
0
1
2
3
4
5
6
7
8
9
10
11 12
L vs Frequency
100
Halogen
Free
0.27 µH
Inductance (µH)
10
4.7 µH
3.3 µH
2.2 µH
1.0 µH
0.56 µH
0.27 µH
Q200
+
125°C
AEC
Current (A)
Inductance (µH)
0.8
0.6
1
0.56 µH
0.4
0.2
0
0
1
2
3
4
5
6
7
8
9
10
0.208 ±0.008
5,28 ±0,2
0.1
0.1
1
10
100
Frequency (MHz)
Current (A)
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Inductance (µH)
1.0 µH
XXX
0.216 ±0.008
5,48 ±0,2
0
1
2
3
Current (A)
4
5
6
7
8
Dash
number
Inductance (µH)
3.0
2.5
2.0
1.5
1.0
0.5
0
Indicates start lead
and orientation of
terminations
2.2 µH
0.122 max
*
3,1
0.039 ±0.002
1,0 ±0,05
0.091 ±0.010
2,31 ±0.25
0.130
3,31
0
0.5
1.0
1.5
2.0
Current (A)
2.5
3.0
3.5
4.0
4.5 5.0
See
table
0.165
typ
4,2
Terminal
thickness (typ)
(in / mm)
0.0079 / 0.20
0.0079 / 0.20
0.0079 / 0.20
0.0047 / 0.12
0.0047 / 0.12
0.0039 / 0.10
Inductance (µH)
5
4
3
2
1
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
3.3 µH
0.185
4,70
Dash
number
-271
-561
-102
-222
-332
-472
Current (A)
0.046
1,18
*
For optional tin-lead and tin-silver-
Inductance (µH)
6.0
5.0
4.0
3.0
2.0
1.0
0
Recommended
Land Pattern
4.7 µH
Dimensions are in inches
mm
copper terminations, dimensions
are for the mounted part.
Dimensions before mounting can be
an additional 0.005 inch / 0.13 mm.
Packaging
400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth
0
1.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Current (A)
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 791-2
Revised 11/02/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
京公网安备 11010802033920号
EEWORLD
