DATA SHORT
To request the full datasheet, please visit
www.intersil.com/products/ISL95866
ISL95866
4+3 Multiphase R3™ PWM Regulator for Intel IMVP8™ Desktop CPUs with
SMBus Support
Compliant with Intel IMVP8™, the
ISL95866
provides a
complete power solution for desktop microprocessors
supporting the core (IA), graphics (GT), or unsliced graphics
(GTUS or GTX). The controller provides control and protection
for two Voltage Regulators (VR). The first VR can be configured
for 4-, 3-, 2- or 1-phase operation. The second VR is
configurable for 3-, 2- or 1-phase operation. The VRs feature a
programmable SVID address to allow maximum flexibility in
supporting desktop processor SKUs. Both controller outputs share
a common serial control bus to communicate with the CPU and
achieve lower cost and smaller board area compared with a two-
chip approach.
Based on Intersil’s Robust Ripple Regulator R3™ technology,
the R3™ modulator has many advantages compared to
traditional modulators. These include faster transient settling
time, variable switching frequency in response to load
transients and improved light-load efficiency due to diode
emulation mode with load-dependent low switching frequency.
The ISL95866 has several other key features. The controller
features three integrated +12V gate drivers with two on the
VR A output. The controller supports either DCR current
sensing with a single NTC thermistor for DCR temperature
compensation or more precision through resistor current
sensing if desired. Both outputs feature remote voltage sense,
programmable I
MAX
, adjustable switching frequency, OC
protection, and single VR_READY power-good indicator. The
ISL95866 features an SMBus interface, which supports
enabling or disabling droop, output voltage offset adjustment,
and disabling of OVP and OCP protections.
FN8821
Rev 0.00
November 28, 2016
Features
• Supports Intel serial data bus interface
• SMBus/PMBus/I
2
C interface with SVID conflict free
- DROOP, OVP, and OCP enable/disable
- Voltage offset adjustment
•
Green hybrid digital
R3™ modulator
- Excellent transient response
- Phase shedding with power state selection
- Diode emulation in single-phase for high light-load
efficiency
• Dual output controller
- Voltage regulator A: 4-, 3-, 2-, or 1-phase designs with two
+12V integrated gate drivers
- Voltage regulator B: 3-, 2-, or 1-phase designs with one
+12V integrated gate driver
• 0.5% system accuracy over-temperature
• Supports multiple current-sensing methods
- Lossless inductor DCR current sensing
- Precision resistor current sensing
• Differential remote voltage sensing
• Resistor programmable address selection, I
MAX
, and
switching frequency for both outputs
• Adaptive body diode conduction time reduction
Applications
• IMVP8™ compliant desktops
Related Literature
• For a full list of related documents, visit our website
-
ISL95866
product page
100
90
EFFICIENCY (%)
80
PS2
70
60
50
40
EFFICIENCY (%)
100
90
80
PS1
70
PS2
60
50
40
PS1
PS0
PS0
0
10
20
30
40
50
60
70
80
90
0
10
LOAD CURRENT (A)
20
30
40
LOAD CURRENT (A)
50
60
FIGURE 1. 4-PHASE EFFICIENCY vs LOAD
FIGURE 2. 3-PHASE EFFICIENCY vs LOAD
FN8821 Rev 0.00
November 28, 2016
Page 1 of 2
ISL95866
© Copyright Intersil Americas LLC 2016. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see
www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at
www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see
www.intersil.com
FN8821 Rev 0.00
November 28, 2016
Page 2 of 2
Embedded System
京公网安备 11010802033920号
EEWORLD
