512Mb: x4, x8, x16 DDR SDRAM
Features
Double Data Rate (DDR) SDRAM
MT46V128M4 – 32 Meg x 4 x 4 banks
MT46V64M8 – 16 Meg x 8 x 4 banks
MT46V32M16 – 8 Meg x 16 x 4 banks
Features
• V
DD
= 2.5V ±0.2V, V
DDQ
= 2.5V ±0.2V
V
DD
= 2.6V ±0.1V, V
DDQ
= 2.6V ±0.1V (DDR400)
1
• Bidirectional data strobe (DQS) transmitted/
received with data, i.e., source-synchronous data
capture (x16 has two – one per byte)
• Internal, pipelined double-data-rate (DDR)
architecture; two data accesses per clock cycle
• Differential clock inputs (CK and CK#)
• Commands entered on each positive CK edge
• DQS edge-aligned with data for READs; center-
aligned with data for WRITEs
• DLL to align DQ and DQS transitions with CK
• Four internal banks for concurrent operation
• Data mask (DM) for masking write data
(x16 has two – one per byte)
• Programmable burst lengths: 2, 4, or 8
• Auto refresh
–
64ms, 8192-cycle
• Longer-lead TSOP for improved reliability (OCPL)
• 2.5V I/O (SSTL_2 compatible)
• Concurrent auto precharge option is supported
•
t
RAS lockout supported (
t
RAP =
t
RCD)
Options
• Configuration
–
128 Meg x 4 (32 Meg x 4 x 4 banks)
–
64 Meg x 8 (16 Meg x 8 x 4 banks)
–
32 Meg x 16 (8 Meg x 16 x 4 banks)
• Plastic package
–
66-pin TSOP
–
66-pin TSOP (Pb-free)
–
60-ball FBGA (10mm x 12.5mm)
–
60-ball FBGA (10mm x 12.5mm) (Pb-free)
–
60-ball FBGA (8mm x 12.5mm)
–
60-ball FBGA (8mm x 12.5mm) (Pb-free)
• Timing – cycle time
–
5ns @ CL = 3 (DDR400)
–
6ns @ CL = 2.5 (DDR333) (FBGA only)
–
6ns @ CL = 2.5 (DDR333) (TSOP only)
• Self refresh
–
Standard
–
Low-power self refresh
• Temperature rating
–
Commercial (0°C to +70°C)
–
Industrial (–40°C to +85°C)
• Revision
–
x4, x8, x16
–
x4, x8, x16
Marking
128M4
64M8
32M16
TG
P
FN
2
BN
2
CV
3
CY
3
-5B
-6
2
-6T
2
None
L
None
IT
:F
:J
Notes: 1. DDR400 devices operating at < DDR333
conditions can use V
DD
/V
DDQ
= 2.5V +0.2V.
2. Available only on Revision F.
3. Available only on Revision J.
Table 1:
Key Timing Parameters
CL = CAS (READ) latency; data-out window is MIN clock rate with 50% duty cycle at CL = 2, CL = 2.5, or CL = 3
Speed
Grade
-5B
-6
6T
-75E/-75Z
-75
Clock Rate (MHz)
CL = 2
133
133
133
133
100
CL = 2.5
167
167
167
133
133
CL = 3
200
n/a
n/a
n/a
n/a
Data-Out
Window
1.6ns
2.1ns
2.0ns
2.5ns
2.5ns
Access
Window
±0.70ns
±0.70ns
±0.70ns
±0.75ns
±0.75ns
DQS–DQ
Skew
0.40ns
0.40ns
0.45ns
0.50ns
0.50ns
PDF: 09005aef80a1d9d4/Source: 09005aef82a95a3a
512Mb_DDR_x4x8x16_D1.fm - 512Mb DDR: Rev. Q; Core DDR Rev. E 7/11 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2000 Micron Technology, Inc. All rights reserved.
512Mb: x4, x8, x16 DDR SDRAM
Features
Table 2:
Parameter
Configuration
Refresh count
Row address
Bank address
Column address
Addressing
128 Meg x 4
32 Meg x 4 x 4 banks
8K
8K (A0–A12)
4 (BA0, BA1)
4K (A0–A9, A11, A12)
64 Meg x 8
16 Meg x 8 x 4 banks
8K
8K (A0–A12)
4 (BA0, BA1)
2K (A0-A9, A11)
32 Meg x 16
8 Meg x 16 x 4 banks
8K
8K (A0–A12)
4 (BA0, BA1)
1K (A0–A9)
Table 3:
Marking
-5B
1
-6
-6T
-75E
-75Z
-75
Speed Grade Compatibility
PC3200 (3-3-3) PC2700 (2.5-3-3) PC2100 (2-2-2) PC2100 (2-3-3) PC2100 (2.5-3-3) PC1600 (2-2-2)
Yes
–
–
–
–
–
-5B
Notes:
Yes
Yes
Yes
–
–
–
-6/-6T
Yes
Yes
Yes
Yes
–
–
-75E
Yes
Yes
Yes
Yes
Yes
–
-75Z
Yes
Yes
Yes
Yes
Yes
Yes
-75
Yes
Yes
Yes
Yes
Yes
Yes
-75
1. The -5B device is backward compatible with all slower speed grades. The voltage range of
-5B device operating at slower speed grades is V
DD
= V
DDQ
= 2.5V ± 0.2V.
Figure 1:
512Mb DDR SDRAM Part Numbers
Example Part Number: MT46V32M16P-6T:F
-
MT46V
Configuration
Package
Speed
:
Sp.
Op. Temp. Revision
Revision
:F x4, x8, x16
:J x4, x8, x16
Configuration
128 Meg x 4
64 Meg x 8
32 Meg x 16
Package
400-mil TSOP
400-mil TSOP (Pb-free)
10mm x 12.5mm FBGA
10mm x 12.5mm FBGA (Pb-free)
8mm x 12.5mm FBGA
8mm x 12.5mm FBGA (Pb-free)
TG
P
FN
BN
CV
CY
-5B
-6
-6T
Speed Grade
tCK = 5ns, CL = 3
tCK = 6ns, CL = 2.5
tCK = 6ns, CL = 2.5
128M4
64M8
32M16
IT
Operating Temp
Commercial
Industrial
Special Options
Standard
L
Low power
FBGA Part Number System
Due to space limitations, FBGA-packaged components have an abbreviated part
marking that is different from the part number. For a quick conversion of an FBGA code,
see the FBGA Part Marking Decoder on Micron’s Web site:
www.micron.com.
PDF: 09005aef80a1d9d4/Source: 09005aef82a95a3a
512Mb_DDR_x4x8x16_D1.fm - 512Mb DDR: Rev. Q; Core DDR Rev. E 7/11 EN
2
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2000 Micron Technology, Inc. All rights reserved.
512Mb: x4, x8, x16 DDR SDRAM
Table of Contents
Table of Contents
State Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Functional Block Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Pin and Ball Assignments and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Package Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Electrical Specifications – I
DD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Electrical Specifications – DC and AC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
DESELECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
NO OPERATION (NOP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
LOAD MODE REGISTER (LMR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
ACTIVE (ACT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
READ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
WRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
PRECHARGE (PRE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
BURST TERMINATE (BST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
AUTO REFRESH (AR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
SELF REFRESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
INITIALIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
REGISTER DEFINITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
ACTIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
READ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
WRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
PRECHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
AUTO REFRESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
SELF REFRESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Power-down (CKE Not Active) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
PDF: 09005aef80a1d9d4/Source: 09005aef82a95a3a
512Mb_DDRTOC.fm - 512Mb DDR: Rev. Q; Core DDR Rev. E 7/11 EN
3
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2000 Micron Technology, Inc. All rights reserved.
Important Notes and Warnings
Important Notes and Warnings
Micron Technology, Inc. ("Micron") reserves the right to make changes to information published in this
document, including without limitation specifications and product descriptions. This document
supersedes and replaces all information supplied prior to the publication hereof. You may not rely on any
information set forth in this document if you obtain the product described herein from any unauthorized
distributor or other source not authorized by Micron.
Automotive Applications.
Products are not designed or intended for use in automotive applications
unless specifically designated by Micron as automotive-grade by their respective data sheets. Distributor
and customer/distributor shall assume the sole risk and liability for and shall indemnify and hold Micron
harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees arising out of,
directly or indirectly, any claim of product liability, personal injury, death, or property damage resulting
directly or indirectly from any use of nonautomotive-grade products in automotive applications.
Customer/distributor shall ensure that the terms and conditions of sale between customer/distributor and
any customer of distributor/customer (1) state that Micron products are not designed or intended for use
in automotive applications unless specifically designated by Micron as automotive-grade by their
respective data sheets and (2) require such customer of distributor/customer to indemnify and hold
Micron harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees
arising out of, directly or indirectly, any claim of product liability, personal injury, death, or property
damage resulting from any use of non-automotive-grade products in automotive applications.
Critical Applications.
Products are not authorized for use in applications in which failure of the Micron
component could result, directly or indirectly in death, personal injury, or severe property or
environmental damage ("Critical Applications"). Customer must protect against death, personal injury,
and severe property and environmental damage by incorporating safety design measures into
customer's applications to ensure that failure of the Micron component will not result in such harms.
Should customer or distributor purchase, use, or sell any Micron component for any critical application,
customer and distributor shall indemnify and hold harmless Micron and its subsidiaries, subcontractors,
and affiliates and the directors, officers, and employees of each against all claims, costs, damages, and
expenses and reasonable attorneys' fees arising out of, directly or indirectly, any claim of product liability,
personal injury, or death arising in any way out of such critical application, whether or not Micron or its
subsidiaries, subcontractors, or affiliates were negligent in the design, manufacture, or warning of the
Micron product.
Customer Responsibility.
Customers are responsible for the design, manufacture, and operation of
their systems, applications, and products using Micron products. ALL SEMICONDUCTOR PRODUCTS
HAVE INHERENT FAILURE RATES AND LIMITED USEFUL LIVES. IT IS THE CUSTOMER'S SOLE
RESPONSIBILITY TO DETERMINE WHETHER THE MICRON PRODUCT IS SUITABLE AND FIT FOR
THE CUSTOMER'S SYSTEM, APPLICATION, OR PRODUCT. Customers must ensure that adequate
design, manufacturing, and operating safeguards are included in customer's applications and products to
eliminate the risk that personal injury, death, or severe property or environmental damages will result
from failure of any semiconductor component.
Limited Warranty.
In no event shall Micron be liable for any indirect, incidental, punitive, special or
consequential damages (including without limitation lost profits, lost savings, business interruption, costs
related to the removal or replacement of any products or rework charges) whether or not such damages
are based on tort, warranty, breach of contract or other legal theory, unless explicitly stated in a written
agreement executed by Micron's duly authorized representative.
512Mb: x4, x8, x16 DDR SDRAM
State Diagram
State Diagram
Figure 2:
Simplified State Diagram
Power
applied
Power
on
PRE
Precharge
all banks
LMR
Self
refresh
REFS
LMR
REFSX
Idle
REFA
all banks
precharged
CKEL
CKEH
MR
EMR
Auto
refresh
Active
power-
down
ACT
CKE HIGH
Precharge
power-
down
CKE LOW
Row
active
WRITE
WRITE
WRITE A
Write
READ A
READ
READ
BST
READ
Burst
stop
Read
WRITE A
PRE
READ A
PRE
PRE
READ A
Write A
Read A
PRE
Precharge
PREALL
Automatic sequence
Command sequence
ACT = ACTIVE
BST = BURST TERMINATE
CKEH = Exit power-down
CKEL = Enter power-down
EMR = Extended mode register
LMR = LOAD MODE REGISTER
MR = Mode register
PRE = PRECHARGE
PREALL = PRECHARGE all banks
READ A = READ with auto precharge
REFA = AUTO REFRESH
REFS = Enter self refresh
REFSX = Exit self refresh
WRITE A = WRITE with auto precharge
Note:
This diagram represents operations within a single bank only and does not capture concur-
rent operations in other banks.
PDF: 09005aef80768abb/Source: 09005aef82a95a3a
DDR_x4x8x16_Core1.fm - 512Mb DDR: Rev. Q; Core DDR Rev. E 7/11 EN
4
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2000 Micron Technology, Inc. All rights reserved.
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
