Designed for Rugged Excellence
IGAR-1062+-4G
Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router
with 2x10/100/1000Base-T(X)
Features
High Speed Air Connectivity: WLAN interface support up to
300Mbps link speed
Provide 2 port 10/100/1000Base-T(X) port and 1 sim card slot
4G LTE Modem dial up included
Provide HNAT enhance LAN to WAN routing performance
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/
WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Secured Management by HTTPs
Various kind of WAN Connection Type supported: Dynamic/Static
IP, PPPoE, Modem/Dial Up
Support client operating mode
IP table to prevent access from unauthorized IP address
Support VPN for secured network connection (Open VPN , PPTP,
IPSEC, VPN)
Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
Wireless connecting status monitoring
Versatile modes & event alarm by e-mail
1KV isolation for PoE P.D.
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled
Introduction
IGAR-1062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where
ETH1 for LAN and ETH2 for WAN.
It supports 802.1X and MAC filter for security control.
It could be configured to
In the mode
operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem dial up.
of Modem dial up, it support GPRS/3G/3.5G/LTE modem by internal cellular module.
Users can set up WLAN
In addition,
This
environment to fulfill demands of various applications rapidly by dialing up cellular modems.
IGAR-1062+-4G provides PoE P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE specification.
feature extends the layout up to 100 meters.
wireless communication.
Therefore, IGAR-1062+-4G is one of the best solution for applications of
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Application
In IGAR-1062+-4G , there are 3 modes of routing functions supported: Dynamic/Static IP route, PPPoE dial up, and
Modem dial up.
IGAR-1062+-4G also support NAT, VPN and Back up functions.
You can build up the wireless network
and connect to the Internet easily.
4G
IGAR Router
Multiple WAN Devices supported
4G
Dimension
* All specifications are subject to change without notice.
Designed for Rugged Excellence
DI/DO Definition
Digital Input Pin Definition
PIN
Function
1
DI1
2
DI2
3
DI3
4
DI4
5
COM
Digital Output Pin Definition
PIN
Function
1
DO1
2
DO2
3
DO3
4
DO4
5
GND
Specifications
ORing AP Router Model
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45
Auto MDI/MDIX
Present at ETH2
Fully compliant with IEEE 802.3af Power Device specification
PoE P.D. port
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 10
8
ohms
min
5-Pin Terminal Block
Sim Card Slot
Cellular Interface
Cellular Standard
GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /HSPA+ /LTE
America(US)
LTE:
700/1700/2100/ MHz
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:
Band Option
800/850/1900/2100 MHz
GSM/GPRS/EDGE:
850/900/1800/1900 MHz
Europe(EU)
LTE:
2(DI x 4 and DO x 4)
1
2
IGAR-1062+-4G
* All specifications are subject to change without notice.
Designed for Rugged Excellence
800/900/1800/2100/2600 MHz
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:
900/2100 MHz
GSM/GPRS/EDGE:
900/1800/1900 MHz
Antenna Connector
WLAN interface
Antenna Connector
2 x Reverse SMA Female
IEEE802.11b: CCK/DQPSK/DBPSK
Modulation
IEEE802.11a/g: OFDM
IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
America / FCC:
2.412~2.462 GHz (11 channels )
Frequency Band
5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )
Europe CE / ETSI:
2.412~2.472 GHz ( 13 channels )
5.180~5.240 GHz ( 4 channels )
802.11b: 1/2/5.5/11 Mbps
Transmission Rate
802.11a/g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 300 Mbps
802.11a: 12dBm ± 1.5dBm@54Mbps
802.11b: 17dBm ± 1.5dBm@11Mbps
802.11g: 16dBm ± 1.5dBm@54Mbps
Transmit Power
802.11gn HT20: 15dBm ± 1.5dBm @MCS7
802.11gn HT40: 14dBm ± 1.5dBm @MCS7
802.11an HT20: 12dBm ± 1.5dBm @MCS7
802.11an HT40: 11dBm ± 1.5dBm @MCS7
802.11a : -76dBm ± 2dBm@54Mbps
802.11b : -85dBm ± 2dBm@11Mbps
802.11g : -76dBm ± 2dBm@54Mbps
Receiver Sensitivity
802.11gn HT20:-75dBm ± 2dBm@MCS7
802.11gn HT40:-72dBm ± 2dBm@MCS7
802.11an HT20:-74dBm ± 2dBm@MCS7
802.11an HT40:-71dBm ± 2dBm@MCS7
WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
Encryption Security
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security
LED indicators
3 x LEDs, PWR1(2)(PoE) / Ready:
Power indicator
Red On : Power is on and booting up
Green On : Power is on and functioning Normal
2 x LEDs,
LNK/ACT:Green for port Act.
10/100/1000T RJ45 port indicator
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps
WLAN LEDs:
WAN LEDs:
Fault
Fault contact
Relay
Power
Redundant Input power
Power consumption
Overload current protection
Reverse polarity protection
Physical Characteristic
Dual DC inputs. 12-48VDC on 6-pin terminal block
9.5 Watts
Present
Present
Relay output to carry capacity of 1A at 24VDC
Green Solid On: RF on, Blink: data transmitting
Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Green On : Power is on and functioning Normal
1 x LED, Red for Ethernet link down or power down indicator
SSID
broadcast
disable
1 x SMA Female
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Enclosure
Dimension (W x D x H)
Weight (g)
Environmental
Storage Temperature
Operating Temperature
Operating Humidity
Regulatory approvals
EMI
EMS
Shock
Free Fall
Vibration
Safety
Warranty
IP-30
74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
1155g
-40 to 85oC (-40 to 185
o
F)
-25 to 70
o
C (-13 to 158
o
F)
5% to 95% Non-condensing
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
IEC60068-2-27
IEC60068-2-32
IEC60068-2-6
EN60950-1
5 years
* All specifications are subject to change without notice.
京公网安备 11010802033920号
EEWORLD
