SQFlash
Industrial Class 10 Micro SD Card
SQFlash Micro SD Card
Technical Manual
Class 10 (SQF-MSDx1-xM/G-21x)
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 0.3
Page 1 of 22
May 4, 2016
SQFlash
Industrial Class 10 Micro SD Card
CONTENTS
1.
Overview ............................................................................................ 4
2.
Standard Features ............................................................................. 5
3.
Additional Features ........................................................................... 6
4.
Pin Assignment and Block Diagram ................................................ 8
5.
Power Consumption ....................................................................... 11
6.
DC Characters ................................................................................. 11
7.
AC Characters ................................................................................. 14
8.
Dimensions ...................................................................................... 19
Appendix: Part Number Table ........................................................... 21
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 0.3
Page 2 of 22
May. 4, 2016
SQFlash
Industrial Class 10 Micro SD Card
Revision History
Rev.
Date
History
0.1
0.2
0.3
2014/8/4
2014/8/21
2016/5/4
1.
1.
1.
1
st
draft
Add Ultra MLC
Add SLC
Advantech reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or
design. Information furnished by Advantech is believed to be accurate and reliable. However, Advantech does not assure any liability
arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither
does it convey any license under its patent rights nor the rights of others.
Copyright © 1983-2015 Advantech Co., Ltd. All rights reserved.
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 0.3
Page 3 of 22
May. 4, 2016
SQFlash
Industrial Class 10 Micro SD Card
1.
Overview
The SQFlash Micro Secure Digital card (SQF-MSD) is fully compliant to the specification released by SD Card
Association. The Command List supports [Part 1 Physical Layer Specification Ver3.01 Final] definitions. Card
Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver3.00 Final] specifications.
The microSD 3.0 card comes with 8-pin interface, designed to operate at a maximum operating frequency of
50MHz or 100MHz. It can alternate communication protocol between the SD mode and SPI mode. It performs data
error detection and correction with very low power consumption. Its capacity could be more than 128MB and up to
64GB.
SQFlash Industrial Micro SD card is one of the most popular cards today based on its high performance, good
reliability and wide compatibility. Not to mention that it’s well adapted for hand-held applications in
semi-industrial/medical markets already.
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 0.3
Page 4 of 22
May. 4, 2016
SQFlash
Industrial Class 10 Micro SD Card
2.
–
Standard Features
Support SD system specification version 3.0
Card capacity of non-secure area and secure area support [Part 3 Security
Specification Ver3.0 Final] Specifications
Support SD SPI mode
Designed for read-only and read/write cards
Bus Speed Mode (using 4 parallel data lines)
UHS-I mode
●
SDR12 - SDR up to 25MHz 1.8V signaling
●
SDR25 - SDR up to 50MHz 1.8V signaling
●
SDR50: 1.8V signaling, Frequency up to 100 MHz, up to 50MB/sec
●
SDR104: 1.8V signaling, Frequency up to 208MHz, up to 104MB/sec
●
DDR50: 1.8V signaling, Frequency up to 50 MHz, sampled on both clock edges, up to 50MB/sec
Note:
Timing in 1.8V signaling is different from that of 3.3V signaling.
–
The command list supports [Part 1 Physical Layer Specification Ver3.1 Final]
definitions
Copyrights Protection Mechanism
Compliant with the highest security of SDMI standard
Support CPRM (Content Protection for Recordable Media) of SD Card
Card removal during read operation will never harm the content
Password Protection of cards (optional)
Write Protect feature using mechanical switch
Built-in write protection features (permanent and temporary)
+4KV/-4KV ESD protection in contact pads
Operation voltage range: 2.7 ~ 3.6V
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 0.3
Page 5 of 22
May. 4, 2016
京公网安备 11010802033920号
EEWORLD
