Gap Pad 2200SF
®
Thermally Conductive, Silicone-Free Gap Filling Material
Features and Benefits
• Thermal conductivity: 2.0 W/m-K
• Silicone-free formulation
• Medium compliance with easy handling
• Electrically isolating
PROPERTY
Color
Reinforcement Carrier
Thickness (inch) / (mm)
Inherent Surface Tack (1 or 2 sided)
Density (g/cc)
Heat Capacity (J/g-K)
Hardness, Bulk Rubber (Shore 00) (1)
Young’s Modulus (psi) / (kPa) (2)
Continuous Use Temp (°F) / (°C)
ELECTRICAL
Dielectric Breakdown Voltage (Vac)
Dielectric Constant (1000 Hz)
Volume Resistivity (Ohm-meter)
Flame Rating
THERMAL
Thermal Conductivity (W/m-K)
TYPICAL PROPERTIES OF GAP PAD 2200SF
IMPERIAL VALUE
Green
Fiberglass
0.010 to 0.125
2
2.8
1.0
70
33
-76 to 257
>5000
6.0
10
8
METRIC VALUE
Green
Fiberglass
0.254 to 3.175
2
2.8
1.0
70
228
-60 to 125
>5000
6.0
10
8
TEST METHOD
Visual
—
ASTM D374
—
ASTM D792
ASTM E1269
ASTM D2240
ASTM D575
—
ASTM D149
ASTM D150
ASTM D257
U.L. 94
ASTM D5470
V-O
2.0
V-O
2.0
Gap Pad 2200SF is a thermally conductive,
electrically isolating, silicone-free polymer
specially designed for silicone-sensitive appli-
cations.The material is ideal for applications
with uneven topologies and high stackup
tolerances. Gap Pad 2200SF is reinforced for
easy material handling and added durability
during assembly.The material is available with
a protective liner on both sides. Gap Pad
2200SF is supplied with reduced tack on one
side allowing for burn-in processes and easy
rework.
Note: Resultant thickness is defined as the final gap
thickness of the application.
140
Gap Pad 2200SF
1) Thirty second delay value Shore 00 hardness scale.
2) Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch
2
. For more information on Gap Pad
modulus, refer to Bergquist Application Note #116.
Typical Applications:
• Digital disk drives
• Proximity near electrical contacts (e.g. DC brush motors, connectors, relays)
• Fiber optics modules
Configurations Available:
• Sheet form
• Die-cut parts
• Standard sheet size is 8" x 16"
Building a Part Number Standard Options
GP2200SF
–
0.010
– 02
– 0816 –
NA
Section B
Section C
Section D
0
0
0.5
1.0
1.5
2.0
2.5
Section A
Section E
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
0816 = Standard sheet size 8" x 16", or
00 = custom configuration
02 = Natural tack, both sides
Standard thicknesses available: 0.010", 0.015", 0.020",
0.040", 0.060", 0.080", 0.100", 0.125"
GP2200SF = Gap Pad 2200SF Material
Note: To build a part number, visit our website at www.bergquistcompany.com.
www.bergquistcompany.com
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
The Bergquist Company -
European Headquarters
Netherlands
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company -
Asia Headquarters
Hong Kong
Phone: 852-2690-9296
Fax: 852-2690-2344
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_GP_2200SF_0711
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
