Note the following details of the code protection feature on Microchip devices:
•
•
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
•
•
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device applications and the like is provided only for your convenience and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Micro-
chip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold
harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or
otherwise, under any Microchip intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate, AVR, AVR logo, AVR Freaks, BitCloud, chipKIT, chipKIT logo, CryptoMemory,
CryptoRF, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, Kleer, LANCheck, LINK MD, maXStylus, maXTouch, MediaLB, megaAVR,
MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, Prochip Designer, QTouch, SAM-BA, SpyNIC, SST, SST
Logo, SuperFlash, tinyAVR, UNI/O, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other
countries.
ClockWorks, The Embedded Control Solutions Company, EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision
Edge, and Quiet-Wire are registered trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, CodeGuard, CryptoAuthentication,
CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN,
In-Circuit Serial Programming, ICSP, INICnet, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, memBrain, Mindi, MiWi,
motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM,
PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S., SQI,
SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are
trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other
countries.
All other trademarks mentioned herein are property of their respective companies.
© 2018, Microchip Technology Incorporated, All Rights Reserved.
ISBN: 978-1-5224-3368-2
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
==
ISO/TS 16949
==
DS50002789A-page 2
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
®
MCUs and dsPIC
®
DSCs, K
EE
L
OQ
®
code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
2018 Microchip Technology Inc.
SAMA5D3
ETHERNET DEVELOPMENT SYSTEM
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Introduction............................................................................................................ 5
Document Layout .................................................................................................. 5
Conventions Used in this Guide ............................................................................ 7
The Microchip Website.......................................................................................... 8
Development Systems Customer Change Notification Service ............................ 8
Customer Support ................................................................................................. 8
Document Revision History ................................................................................... 9
Chapter 1. Overview
1.1 Introduction ................................................................................................... 11
1.2 References ................................................................................................... 12
1.3 Software and Programming Resources ....................................................... 12
Chapter 2. Getting Started
2.1 Introduction ................................................................................................... 13
2.2 SAMA5D3 EDS and EVB-KSZ9563 Configuration ...................................... 13
Chapter 3. Board Details and Configuration
3.1 Introduction ................................................................................................... 15
3.2 Power Source ............................................................................................... 15
3.3 Processor and Memory ................................................................................ 15
3.4 Flash Memory Programming ........................................................................ 16
3.5 Reset ............................................................................................................ 16
3.6 RGMII/MII GMAC Connector ........................................................................ 17
3.7 RMII EMAC Connector ................................................................................. 18
3.8 USB Ports ..................................................................................................... 19
3.9 Serial UART Interface .................................................................................. 19
3.10 JTAG Port ................................................................................................... 19
3.11 Board Features and Specifications ............................................................ 19
Chapter 4. Software Configuration and Operation
4.1 Introduction ................................................................................................... 21
4.2 Communication Options ............................................................................... 21
4.2.1 Ethernet Communication Option – Telnet ................................................. 21
4.2.2 USB-to-Serial Communication Option ....................................................... 22
4.3 Software Version .......................................................................................... 23
4.4 IP and MAC Addresses ................................................................................ 24
4.5 Ethernet Device Register Address ............................................................... 24
4.6 Ethernet Switch MIB Counters ..................................................................... 24
2018 Microchip Technology Inc.
DS50002789A-page 3
SAMA5D3 Ethernet Development System User’s Guide
4.7 Bootloader Settings ...................................................................................... 25
4.8 Automatically Running Process .................................................................... 25
4.9 Precision Time Protocol (IEEE 1588) ........................................................... 26
4.10 VLAN Setup ................................................................................................ 26
4.11 DHCP ......................................................................................................... 26
4.12 Nuttcp Traffic Testing ................................................................................. 26
Appendix A. Programming the SAMA5D3 EDS Board
A.1 Introduction .................................................................................................. 27
A.2 NAND Flash Programming .......................................................................... 27
A.2.1 NAND Flash Programming on Linux .........................................................27
A.2.2 NAND Flash Programming on Windows ...................................................27
A.3 SD Card Image Programming ...................................................................... 32
A.3.1 SD Card Programming ..............................................................................32
A.4 Booting the SAMA5D3 EDS ......................................................................... 33
A.4.1 Booting from NAND Flash .........................................................................33
A.4.2 Booting from SD Card ...............................................................................33
Appendix B. Schematics
B.1 Introduction .................................................................................................. 35
Appendix C. Bill of Materials
C.1 Introduction .................................................................................................. 43
Worldwide Sales and Service .....................................................................................48
DS50002789A-page 4
2018 Microchip Technology Inc.
SAMA5D3
ETHERNET DEVELOPMENT SYSTEM
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
SAMA5D3. Items discussed in this chapter include:
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
The Microchip Website
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes the Microchip SAMA5D3 Ethernet Development System
Board.
•
Chapter 1. “Overview”
– This chapter provides a brief description of the
SAMA5D3 Ethernet Development System Board.
•
Chapter 2. “Getting Started”
– This chapter includes instructions on how to get
started with the SAMA5D3 Ethernet Development System Board.
•
Chapter 3. “Board Details and Configuration”
– This chapter includes instruc-
tions on how to configure the SAMA5D3 Ethernet Development System Board to
work with the EVB-KSZ9563 3-port switch evaluation board.
•
Chapter 4. “Software Configuration and Operation”
– This chapter explains
how to establish a communication channel from a PC to the SAMA5D36 MPU. It
also provides some examples of things to do in the bootloader and Linux environ-
ments once connected.
•
Appendix A. “Programming the SAMA5D3 EDS Board”
– This appendix
includes instructions on how to program the SAMA5D3 EDS on-board NAND
flash and how to prepare a bootable SD card.
2018 Microchip Technology Inc.
DS50002789A-page 5
PCB Design
京公网安备 11010802033920号
EEWORLD
