The MegaPAC family of products offers four different versions of user configurability
to meet almost any set of input and output requirements. Leveraging Vicor modular
DC-DC converters, MegaPAC family products combine feature-laden front ends with
slide-in output assemblies called ConverterPACs.
User configurability is at the heart of every MegaPAC. A wide variety of the same
length ConverterPACs™ can be installed, exchanged or removed with the turn of just
one screw. This means the MegaPAC can be reconfigured to meet evolving power
requirements. Given its range of configurability, the MegaPAC is appropriate for
virtually any application from prototype through production.
MegaPAC™ Family
Page 1 of 10
Rev 1.6
03/2016
MegaPAC™ Family
MegaPAC Family
Model
Dimension
Input Voltage
90 – 132 /
180 – 264V
AC
Strappable
260 – 380V
DC
85 – 264V
AC
100 – 380V
DC
Output Power
Number of
Outputs
1 – 10
(5 slots)
ConvertPACs™
Per Slot
ModuPAC™, JrPAC™,
DualPAC™, RamPAC™,
BatPAC™
QPAC™, DualQPAC™,
JrQPAC™, FinQPAC™
[b]
(FinQPAC requires 2 slots)
ModuPAC, JrPAC,
DualPAC, RamPAC,
BatPAC, FinPAC™
[a]
(FinPACs require 2 slots)
ModuPAC, JrPAC,
DualPAC, RamPAC,
BatPAC, UniPAC™
[b]
Mini MegaPAC™
9.5 x 6.0 x 3.4in
[241.3 x 152.4 x 86.4mm]
1,000W @ 115V
AC
or 230 Vac
PFC MegaPAC-EL/HPEL™
[a]
15.6 x 6.0” x 3.4in
[396.2 x 152.4 x 86.4mm]
1,200W @ 115V
AC
2,400W @ 230V
AC
1 – 16
(8 slots)
PFC MegaPAC/HP™
12.3 x 6.0 x 3.4in
[312.4 x 152.4 x 86.4mm]
85 – 264V
AC
100 – 380 Vdc
208 or 240V
AC
Three Phase
260 – 352V
DC
2,400W @ 230V
AC
1,200W @ 115V
AC
1 – 16
(8 slots)
4kW MegaPAC™
[a]
[b]
14.0 x 7.5 x 4.9in
[355.6 x 190.5 x 124.5mm]
4,000W – 3 phase
1 – 20
(10 slots)
Low noise ripple for EL power supplies is 10mV
P-P
or 0.15% whichever is greater.
ConverterPACs with Maxi module
MegaPAC Configuration
DC-DC Converter
At the heart of every MegaPAC are Vicor zero-current switching, DC-DC
converters. The modularity of the design combined with the breadth of the
product line means virtually any output voltage can be provided.
ConverterPAC
ConverterPACs are the slide-in output assemblies that allow each MegaPAC
to be easily configured to user-specified output requirements. Using the
Vicor DC-DC converter, up to 600W of output power can be provided
per ConverterPAC. Larger power needs are easily handled by paralleling
ConverterPACs.
MegaPAC
Each MegaPAC houses an array of user-selected ConverterPACs to provide a
customized power supply. Using a different front end for each product line,
almost any input power can be accommodated. The result is a customized
power supply with off-the-shelf delivery.
MegaPAC™ Family
Page 2 of 10
Rev 1.6
03/2016
MegaPAC™ Family
Performance Specifications
Typical at 25ºC, nominal line and 75% load, unless otherwise specified
Parameter
PFC MegaPAC™, PFC MegaPAC-HP™,
PFC MegaPAC-HPEL™, PFC MegaPAC-EL™
Mini MegaPAC™
4kW MegaPAC™
Input Charactersitics
Input
Standard Line
Vantage Line
Line Regulation
Inrush Current
Ride-Through Time
Power Fail
Conducted EMI
(47 – 63Hz)
Power Factor
Surge Immunity
(Common Mode & Normal Mode)
EN 55022 Level B (certain configurations)
FCC B
0.99 (115V
AC
)
0.98 (230V
AC
)
25A
PK
at 115V
AC
25A
PK
at 230V
AC
85 – 264V
AC
115 – 230V
AC
, Strappable
47 – 500Hz
47 – 63Hz
100 – 380V
DC
260 – 380V
DC
0.2% max from 10% to full load
80A
PK
at 115 and 230V
AC
>20ms at nominal line, full load
>3ms warning
EN 55022 Level A
EN 55022 Level A
30A
PK
at 230V
AC
260 – 352V
DC
208 / 240V
AC
, 3-phase, 4 wire
180 – 264V
AC
1-phase
0.65
EN 61000-4-5 Class 3, Performance Critera B
0.92 (3-phase operation)
Output Charactersitics
Load Regulation
0.2% max from 10% to full load
0.5% from no load to 10% load
Standard Line:1.0% for standard voltages, 2.0% for special or adjustable voltages
Set-Point Accuracy
Vantage Line: 2.0% for standard voltages, 5.0% for special or adjustable voltages
See Vicor module specifications.
A preload may be necessary for modules trimmed down below 90% of normal output voltage.
Standard outputs: 2% or 100mV
P-P
max whichever is greater, 10% minimum load
Ripple and Noise
(20MHz BWL)
VXI options: 50mV
P-P
max for outputs,
≤15V
DC
; 150mV
P-P
max. 15V < V
OUT
≤
24V; 1% V
OUT
> 24V
2nd Generation QPAC, FinPAC, FinQPAC and UniPAC performance dependent on the converter module used.
(Output of module is unfiltered.)
QPAC, DualQPAC, JuniorQPAC, RamPAC: 10mV
P-P
max or 0.15%, whichever is greater.
Overcurrent Protection
Overvoltage Protection
Efficiency
105 –130% > 5V outputs
30 – 125%
≤
5V outputs
ModuPACs and QPACs: 115 – 135%
80% typical
1,600W at 40°C (230V
AC
)
PFC MegaPAC; PFC MegaPAC-EL (Low Noise)
82% typical
82% typical
4,000W at 45°C (3-phase)
1,000W at 45°C (115 / 230V
AC
)
1,500W at 45°C (1-phase)
Output Power
2,400W at 40°C (230V
AC
)
PFC MegaPAC HP, PFC MegaPAC HPEL
1,200W at 40°C (115V
AC
) PFC MegaPACs
MegaPAC™ Family
Page 3 of 10
Rev 1.6
03/2016
MegaPAC™ Family
Performance Specifications (Cont.)
Typical at 25ºC, nominal line and 75% load, unless otherwise specified
Parameter
PFC MegaPAC™, PFC MegaPAC-HP™,
PFC MegaPAC-HPEL™, PFC MegaPAC-EL™
Mini MegaPAC™
4kW MegaPAC™
Environmental
Storage Temperature
Operating Temperature
[c]
–40 to +85ºC
Vantage Line Full Power
Vantage Line Half Power
Standard Line Full Power
Standard Line Half Power
Safety Agency Approvals
0 to +40ºC
0 to +60ºC
–20 to +40ºC
–20 to +60ºC
0 to +45ºC
0 to +65ºC
–20 to +45ºC
–20 to +65ºC
cTÜVus
0 to +45ºC
0 to +65ºC
–20 to +45ºC
–20 to +65ºC
CE Marked for Low Voltage Directive and RoHS Recast Directive, as applicable
9.75lbs [4.43kg] (PFC MegaPAC & HP)
Product Weight (Fully Configured)
12.8lbs [5.8kg] (PFC MegaPAC EL)
13.0lbs [6.0kg] (PFC MegaPAC HPEL)
6.25lbs [2.84kg]
22.0lbs [10kg]
Limited Warranty
[c]
2 Years
PFC MegaPACs: The maximum operating temperature is 40°C. If using a VI-200™ with output voltage <12V and >150W, the operating temperature
decreases to 35°C. This also applies when using a FinPAC™ with output voltage <24V and >500W. Mini MegaPAC & 4kW MegaPACs: The operating
temperature is 45°C using any combination of modules and output voltages as long as the front-end rating is not exceeded. Normal derating applies to half
power if the ambient temperature is 20°C hotter.
MegaPAC™ Family
Page 4 of 10
Rev 1.6
03/2016
MegaPAC™ Family
ConverterPAC™ Overview
nn
Output voltages from 2 – 95V
DC
nn
Output power up to 600W
nn
OK
DC
nn
Adjustment ranges from
50% to 110% of nominal
nn
Autosense / Remote Sense
nn
noise option:10mV
P-P
or 0.15%,
Low
whichever is greater
nn
– 90% efficiency
80
nn
Current source outputs available
MegaPAC Configuration for MegaPAC Family Product
Converters
Module(s) Used
Maximum Output Power
VE-200 and VE-J00 ConverterPACs
ModuPAC™
(M) (RoHS – GM)
RamPAC™
(R) (RoHS – GR)
DualPAC™
(D) (RoHS – GD)
JuniorPAC™
(J) (RoHS – GJ)
BatPAC™
(B) (RoHS – GB)
QPAC™
[d]
Low Noise
(L) (RoHS – GL)
JrQPAC™
[d]
Low Noise
(LJ) (RoHS – GLJ)
DualQPAC™
[d]
Low Noise
(LD) (RoHS – GLD)
1 VE-200 DC-DC Converter
1 VE-J00 DC-DC Converter
1 Ripple Attenuator Module (VI-RAM)
2 VI-J00™ DC-DC Converters
Up to 200W per ConverterPAC
Up to 100W for applications requiring low ripple / noise
Is there a problem with selecting DEC for the mpc8280 system clock? The DEC interrupt priority is very low, not as high as the external interrupt. Can it be set?...
[i=s]This post was last edited by johnrey on 2015-7-15 21:56[/i] [color=#000][font=Tahoma,]Preconditions: 1. Systick is part of arm0+ core 2. In sleep mode, arm0+ core is down 3. __WFI will enter at l...
Showing my ugly electronic load:) 1. Front view2. Back view: The heat sink has no insulation, so I cut it with an ABS machine, and the four corners are just right: lol3. Top view. This old case is ver...
The code in the picture below is to make P1.2 and P1.6 output PWM waveforms, but I don't understand the words in the red circle in the picture. Does it mean that P1.2 and P1.6 both output PWM with a d...
This machine is used for static elimination on plastic printing machines. It is made in Taiwan. The control board and thyristor are broken. The IC, thyristor and diode have all been polished. I have n...
Why does the desired pulse wave not appear when differentiating a square wave? Is it possible to use a differential circuit to measure the rising edge time of a square wave?...
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
Vertical cavity surface emitting lasers (VCSELs) are gradually replacing traditional edge emitting lasers, especially in low bandwidth and short-distance communication systems where cost factors ar...[Details]
A standard cell
is an electrochemical
cell
used as a voltage reference standard in many electrical standards laboratories
. If properly maintained, standard cells are very stable. The ...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
With the rapid development of intelligent control technology, computers and information technology, the trend of information appliances IA (Information Application), computers and communications integ...[Details]
1. Proposal of
reconfigurable
measurement and control system
The measurement and control system generally refers to a system based on
computers
to realize data acquisition a...[Details]
A stepper motor is an electromagnetic mechanical device that converts an electrical pulse signal into an angular displacement or a linear displacement. The stability and reliability of a stepper mo...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
The demand for improved healthcare environments is endless, so medical imaging equipment with higher resolution is needed to better observe the human body. High resolution brings problems with sign...[Details]
Battery clamps, commonly known as battery connectors, come in two sizes depending on the thickness of the battery terminals. One is the battery clamp used on thick terminals, with a positive termin...[Details]
Leakage current is generated by parasitic resistance paths between the measurement circuit and a nearby voltage source. This current can significantly reduce the accuracy of low current measurement...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD
