The MegaPAC family of products offers four different versions of user configurability
to meet almost any set of input and output requirements. Leveraging Vicor modular
DC-DC converters, MegaPAC family products combine feature-laden front ends with
slide-in output assemblies called ConverterPACs.
User configurability is at the heart of every MegaPAC. A wide variety of the same
length ConverterPACs™ can be installed, exchanged or removed with the turn of just
one screw. This means the MegaPAC can be reconfigured to meet evolving power
requirements. Given its range of configurability, the MegaPAC is appropriate for
virtually any application from prototype through production.
MegaPAC™ Family
Page 1 of 10
Rev 1.6
03/2016
MegaPAC™ Family
MegaPAC Family
Model
Dimension
Input Voltage
90 – 132 /
180 – 264V
AC
Strappable
260 – 380V
DC
85 – 264V
AC
100 – 380V
DC
Output Power
Number of
Outputs
1 – 10
(5 slots)
ConvertPACs™
Per Slot
ModuPAC™, JrPAC™,
DualPAC™, RamPAC™,
BatPAC™
QPAC™, DualQPAC™,
JrQPAC™, FinQPAC™
[b]
(FinQPAC requires 2 slots)
ModuPAC, JrPAC,
DualPAC, RamPAC,
BatPAC, FinPAC™
[a]
(FinPACs require 2 slots)
ModuPAC, JrPAC,
DualPAC, RamPAC,
BatPAC, UniPAC™
[b]
Mini MegaPAC™
9.5 x 6.0 x 3.4in
[241.3 x 152.4 x 86.4mm]
1,000W @ 115V
AC
or 230 Vac
PFC MegaPAC-EL/HPEL™
[a]
15.6 x 6.0” x 3.4in
[396.2 x 152.4 x 86.4mm]
1,200W @ 115V
AC
2,400W @ 230V
AC
1 – 16
(8 slots)
PFC MegaPAC/HP™
12.3 x 6.0 x 3.4in
[312.4 x 152.4 x 86.4mm]
85 – 264V
AC
100 – 380 Vdc
208 or 240V
AC
Three Phase
260 – 352V
DC
2,400W @ 230V
AC
1,200W @ 115V
AC
1 – 16
(8 slots)
4kW MegaPAC™
[a]
[b]
14.0 x 7.5 x 4.9in
[355.6 x 190.5 x 124.5mm]
4,000W – 3 phase
1 – 20
(10 slots)
Low noise ripple for EL power supplies is 10mV
P-P
or 0.15% whichever is greater.
ConverterPACs with Maxi module
MegaPAC Configuration
DC-DC Converter
At the heart of every MegaPAC are Vicor zero-current switching, DC-DC
converters. The modularity of the design combined with the breadth of the
product line means virtually any output voltage can be provided.
ConverterPAC
ConverterPACs are the slide-in output assemblies that allow each MegaPAC
to be easily configured to user-specified output requirements. Using the
Vicor DC-DC converter, up to 600W of output power can be provided
per ConverterPAC. Larger power needs are easily handled by paralleling
ConverterPACs.
MegaPAC
Each MegaPAC houses an array of user-selected ConverterPACs to provide a
customized power supply. Using a different front end for each product line,
almost any input power can be accommodated. The result is a customized
power supply with off-the-shelf delivery.
MegaPAC™ Family
Page 2 of 10
Rev 1.6
03/2016
MegaPAC™ Family
Performance Specifications
Typical at 25ºC, nominal line and 75% load, unless otherwise specified
Parameter
PFC MegaPAC™, PFC MegaPAC-HP™,
PFC MegaPAC-HPEL™, PFC MegaPAC-EL™
Mini MegaPAC™
4kW MegaPAC™
Input Charactersitics
Input
Standard Line
Vantage Line
Line Regulation
Inrush Current
Ride-Through Time
Power Fail
Conducted EMI
(47 – 63Hz)
Power Factor
Surge Immunity
(Common Mode & Normal Mode)
EN 55022 Level B (certain configurations)
FCC B
0.99 (115V
AC
)
0.98 (230V
AC
)
25A
PK
at 115V
AC
25A
PK
at 230V
AC
85 – 264V
AC
115 – 230V
AC
, Strappable
47 – 500Hz
47 – 63Hz
100 – 380V
DC
260 – 380V
DC
0.2% max from 10% to full load
80A
PK
at 115 and 230V
AC
>20ms at nominal line, full load
>3ms warning
EN 55022 Level A
EN 55022 Level A
30A
PK
at 230V
AC
260 – 352V
DC
208 / 240V
AC
, 3-phase, 4 wire
180 – 264V
AC
1-phase
0.65
EN 61000-4-5 Class 3, Performance Critera B
0.92 (3-phase operation)
Output Charactersitics
Load Regulation
0.2% max from 10% to full load
0.5% from no load to 10% load
Standard Line:1.0% for standard voltages, 2.0% for special or adjustable voltages
Set-Point Accuracy
Vantage Line: 2.0% for standard voltages, 5.0% for special or adjustable voltages
See Vicor module specifications.
A preload may be necessary for modules trimmed down below 90% of normal output voltage.
Standard outputs: 2% or 100mV
P-P
max whichever is greater, 10% minimum load
Ripple and Noise
(20MHz BWL)
VXI options: 50mV
P-P
max for outputs,
≤15V
DC
; 150mV
P-P
max. 15V < V
OUT
≤
24V; 1% V
OUT
> 24V
2nd Generation QPAC, FinPAC, FinQPAC and UniPAC performance dependent on the converter module used.
(Output of module is unfiltered.)
QPAC, DualQPAC, JuniorQPAC, RamPAC: 10mV
P-P
max or 0.15%, whichever is greater.
Overcurrent Protection
Overvoltage Protection
Efficiency
105 –130% > 5V outputs
30 – 125%
≤
5V outputs
ModuPACs and QPACs: 115 – 135%
80% typical
1,600W at 40°C (230V
AC
)
PFC MegaPAC; PFC MegaPAC-EL (Low Noise)
82% typical
82% typical
4,000W at 45°C (3-phase)
1,000W at 45°C (115 / 230V
AC
)
1,500W at 45°C (1-phase)
Output Power
2,400W at 40°C (230V
AC
)
PFC MegaPAC HP, PFC MegaPAC HPEL
1,200W at 40°C (115V
AC
) PFC MegaPACs
MegaPAC™ Family
Page 3 of 10
Rev 1.6
03/2016
MegaPAC™ Family
Performance Specifications (Cont.)
Typical at 25ºC, nominal line and 75% load, unless otherwise specified
Parameter
PFC MegaPAC™, PFC MegaPAC-HP™,
PFC MegaPAC-HPEL™, PFC MegaPAC-EL™
Mini MegaPAC™
4kW MegaPAC™
Environmental
Storage Temperature
Operating Temperature
[c]
–40 to +85ºC
Vantage Line Full Power
Vantage Line Half Power
Standard Line Full Power
Standard Line Half Power
Safety Agency Approvals
0 to +40ºC
0 to +60ºC
–20 to +40ºC
–20 to +60ºC
0 to +45ºC
0 to +65ºC
–20 to +45ºC
–20 to +65ºC
cTÜVus
0 to +45ºC
0 to +65ºC
–20 to +45ºC
–20 to +65ºC
CE Marked for Low Voltage Directive and RoHS Recast Directive, as applicable
9.75lbs [4.43kg] (PFC MegaPAC & HP)
Product Weight (Fully Configured)
12.8lbs [5.8kg] (PFC MegaPAC EL)
13.0lbs [6.0kg] (PFC MegaPAC HPEL)
6.25lbs [2.84kg]
22.0lbs [10kg]
Limited Warranty
[c]
2 Years
PFC MegaPACs: The maximum operating temperature is 40°C. If using a VI-200™ with output voltage <12V and >150W, the operating temperature
decreases to 35°C. This also applies when using a FinPAC™ with output voltage <24V and >500W. Mini MegaPAC & 4kW MegaPACs: The operating
temperature is 45°C using any combination of modules and output voltages as long as the front-end rating is not exceeded. Normal derating applies to half
power if the ambient temperature is 20°C hotter.
MegaPAC™ Family
Page 4 of 10
Rev 1.6
03/2016
MegaPAC™ Family
ConverterPAC™ Overview
nn
Output voltages from 2 – 95V
DC
nn
Output power up to 600W
nn
OK
DC
nn
Adjustment ranges from
50% to 110% of nominal
nn
Autosense / Remote Sense
nn
noise option:10mV
P-P
or 0.15%,
Low
whichever is greater
nn
– 90% efficiency
80
nn
Current source outputs available
MegaPAC Configuration for MegaPAC Family Product
Converters
Module(s) Used
Maximum Output Power
VE-200 and VE-J00 ConverterPACs
ModuPAC™
(M) (RoHS – GM)
RamPAC™
(R) (RoHS – GR)
DualPAC™
(D) (RoHS – GD)
JuniorPAC™
(J) (RoHS – GJ)
BatPAC™
(B) (RoHS – GB)
QPAC™
[d]
Low Noise
(L) (RoHS – GL)
JrQPAC™
[d]
Low Noise
(LJ) (RoHS – GLJ)
DualQPAC™
[d]
Low Noise
(LD) (RoHS – GLD)
1 VE-200 DC-DC Converter
1 VE-J00 DC-DC Converter
1 Ripple Attenuator Module (VI-RAM)
2 VI-J00™ DC-DC Converters
Up to 200W per ConverterPAC
Up to 100W for applications requiring low ripple / noise
I received a notification from the courier yesterday. Because my company was on holiday, I changed the delivery address. It was delivered to my home today. YTO's service is really good.
Without furthe...
Central topics:
Principles and characteristics of switching power supplyProtection of DC switching power supply
Solution:
Overcurrent protection circuitOvervoltage protection circuitSoft start protect...
Automotive electronics chip manufacturers predict that future automotive innovation will come from automotive electronics -"The rapid growth of the automotive manufacturing industry in China will grea...
GPIO port testWhen used as a single-chip microcomputer, there is no need for libraries, it is all about the understanding of registers.[[i]This post was last edited by sdjntl on 2010-11-18 17:31[/i]]...
Silos are vertical containers for storing loose solids. The bottom structure of the silo bears the weight of the material and has the function of unloading, so it is usually funnel-shaped. Although th...
When creating a task, OSTaskStkInit() is called. In some processor transplants, the stack pointer register is pushed into the task stack (what is the value of the stack pointer register at this time?)...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
Do you often have to add brake fluid to your car's brakes? The fact that you need to pump out the brake fluid to make sure there is no gas in the brake fluid line may not be done by the car owner h...[Details]
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
For a long time, due to the limitation of hardware conditions, the display devices of traditional small handheld devices such as PDA are usually monochrome LCD, and the user interface is very simpl...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Instrument stepper motor
The stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
RS-422 and RS-485 are both serial data interface standards, which were developed and published by the Electronic Industries Association (EIA). RS-422 defines a balanced communication interface with a ...[Details]
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
