...................................-10 °C to +50 °C
Power Rating, Linear
15 mm ....0.05 W (0.025 W Dual Gang)
20 mm .......................... 0.1 W (0.05 W)
30 mm ............................ 0.2 W (0.1 W)
45 mm ...................... 0.25 W (0.125 W)
60 mm ...................... 0.25 W (0.125 W)
Power Rating, Audio
15 mm ..0.025 W (0.015 W Dual Gang)
20 mm ...................... 0.05 W (0.025 W)
30 mm .......................... 0.1 W (0.05 W)
45 mm ...................... 0.125 W (0.06 W)
60 mm ...................... 0.125 W (0.06 W)
Maximum Operating Voltage, Linear
15 mm .................................. 100 V DC
20-60 mm ............................. 200 V DC
Maximum Operating Voltage, Audio
15 mm .................................... 50 V DC
20-60 mm ............................. 150 V DC
Withstand Voltage, Audio
............................... 1 Min. at 300 V AC
Sliding Noise ................ 100 mV maximum
Tracking Error ..............3 dB at -40 to 0 dB
Operating Force ............. 30 to 250 g-cm
Stop Strength ..................... 5 kg-cm min.
Sliding Life ......................... 15,000 cycles
Soldering Condition
........... 300 °C max. within 3 seconds
Travel .................... 15, 20, 30, 45, 60 mm
Mechanical Characteristics
Environmental Characteristics
Electrical Characteristics
How To Order
Actuator Styles
PTA 15 4 3 - 2 0 10 DP B 203
DP METAL LEVER
3.0
(.118)
45
1.0
(.039)
3.0
(.118)
1.0
(.039)
6.6
(.259)
4.0
(.157)
10.0
(.393)
15.0
(.590)
15.0
(.590)
5.0
(.196)
CP METAL LEVER
5.0
(.196)
CI INSULATED LEVER
5.0
(.196)
2.0
(.087)
R
0.4
(.016)
2 PLCS.
Model
Stroke Length
• 15 = 15 mm
• 20 = 20 mm
• 30 = 30 mm
• 45 = 45 mm
• 60 = 60 mm
Dust Cover Option
• 4 = No Dust Cover
No. of Gangs
• 3 = Single Gang
• 4 = Dual Gang
Pin Style
• 2 = PC Pins Down Facing
Center Detent Option
• 0 = No Detent
• 2 = Center Detent
Standard Lever Length
(See Table)
• 10 = 10 mm (CI Lever)
• 15 = 15 mm (DP, CP and CI)
Lever Style
• DP = Metal Lever (Refer to Drawing)
• CP = Metal Lever (Refer to Drawing)
• CI = Insulated Lever
(Refer to Drawing)
Resistance Taper
• A = Audio Taper
• B = Linear Taper
Resistance Code (See Table)
1.2
(.047)
4.0
(.157)
1.0
(.039)
1.8
(.070)
5.0
(.196)
Other styles available.
10.0
(.393)
6.6
(.259)
1.0
(.039)
MM
DIMENSIONS:
(INCHES)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Applications
n
Audio/TV sets
n
Car radio
n
Amplifiers/mixers/drum machines/synthesizers
n
PCs/monitors
n
Appliances
59 ± 0.5
(2.323 ± .020)
8.2 ± 0.2
(.323 ± .008)
NOTE: DUST COVER HAS ADHESIVE BACK.
PTA Series - Low Profile Slide Potentiometer
T =
0.3 ± 0.1
(.0118 ± .004)
Product Dimensions
PTAxx43
A
B
0.4
M2 x
2 PLCS.
(.016)
9.0
(.354)
PTAxx44
A
B
M2 x
0.4
2 PLCS.
(.016)
9.0
(.354)
6.5
(.255)
5.5
(.216)
TRAVEL
6.5
(.255)
5.5
(.216)
TRAVEL
3.0
(.118)
3.5
(.137)
4 PLCS.
1.5 ± 0.3
(.059 ± .012)
C
D
E
0.5
(.019)
1.2
(.047)
3.0
(.118)
3.5
(.137)
C
D
E
0.5
(.019)
3.5
(.137)
E
C
1
2
8.4
(.330)
D
DIA.
4 PLCS.
1.7
MIN.
(.067)
1.2
MIN.
(.047)
3
DIA.
3 PLCS.
3.5
(.137)
E
C
2
2
F
D
1
1
8.4
(.330)
DIA.
4 PLCS.
1.7
MIN.
(.067)
1.2
MIN.
(.047)
3
DIA.
6 PLCS.
3
2.0
(.078)
MM
DIMENSIONS:
(INCHES)
Single Gang Dimensions
Model
PTA1543
PTA2043
PTA3043
PTA4543
PTA6043
A
30
(1.18)
35
(1.37)
45
(1.77)
60
(2.36)
75
(2.95)
B
26
(1.02)
31
(1.22)
41
(1.61)
56
(2.20)
71
(2.79)
C
17.8
(.700)
22.8
(.897)
32.8
(1.29)
47.8
(1.88)
62.8
(2.47)
SINGLE GANG
2
Dual Gang Dimensions
D
20.2
(.795)
25.2
(.992)
35.2
(1.38)
50.2
(1.97)
65.2
(2.56)
E
28.5
(1.12)
33
(1.29)
43.5
(1.71)
58.5
(2.30)
73.5
(2.89)
Travel
15
(.59)
20
(.787)
30
(1.18)
45
(1.77)
60
(2.36)
Model
PTA1544
PTA2044
PTA3044
PTA4544
PTA6044
A
30
(1.18)
35
(1.37)
45
(1.77)
60
(2.36)
75
(2.95)
B
26
(1.02)
31
(1.22)
41
(1.61)
56
(2.20)
71
(2.79)
C
17.8
(.700)
22.8
(.897)
32.8
(1.29)
47.8
(1.88)
62.8
(2.47)
DUAL GANG
2
D
20.2
(.795)
25.2
(.992)
35.2
(1.38)
50.2
(1.97)
65.2
(2.56)
E
28.5
(1.12)
33
(1.29)
43.5
(1.71)
58.5
(2.30)
73.5
(2.89)
F
18
(.708)
23
(.905)
33
(1.29)
48
(1.88)
63
(2.48)
Travel
15
(.59)
20
(.787)
30
(1.18)
45
(1.77)
60
(2.36)
1
3
1
1
2
3
3
SCHEMATIC
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SCHEMATIC
Rating Power Ratio (%)
PTA Series - Low Profile Slide Potentiometer
Derating Curve
100
80
60
40
33
20
0
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
Tapers
Audio Taper
100
90
80
Terminal 1-2 Output Voltage
X 100 (%)
Terminal 1-3 Input Voltage
70
60
50
40
30
20
10
0
10
20
30
40
50
60
70
80
90
100
0
10 20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
Rotational Travel (%)
Linear Taper
100
90
80
Terminal 1-2 Output Voltage
X 100 (%)
Terminal 1-3 Input Voltage
70
60
50
40
30
20
10
0
10
20
30
40
50
60
70
80
90
100
Rotational Travel (%)
REV. 07/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns
®
products manufactured by or on behalf of Bourns, Inc. and
its affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns
®
products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current
and complete before placing orders for Bourns
®
products.
The characteristics and parameters of a Bourns
®
product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns
®
product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns
®
product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns
®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns
®
product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns
®
product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns
®
product to meet the requirements of such industry standard or particular qualification. Users
of Bourns
®
products are responsible for ensuring compliance with safety-related requirements and standards applicable to
their devices or applications.
Bourns
®
products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining
applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property
or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives
on a case-by-case basis, use of any Bourns
®
products in such unauthorized applications might not be safe and thus is at
the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III
devices and generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns
®
standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns
®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns
®
standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns
®
standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications.
Bourns expressly identifies Bourns
®
standard products that are suitable for use in aircraft or space applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard product in an aircraft or
space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk.
The use and level of testing applicable to Bourns
®
custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns
®
custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of such testing, the above provisions applicable to Bourns
®
standard products shall
also apply to such Bourns
®
custom products.
Users shall not sell, transfer, export or re-export any Bourns
®
products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns
®
products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns
®
products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns
®
products may not, without
prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
Under CE5, I wrote a USB driver for Motola mobile phone. Now it loads OK. The information from the serial port is as follows: USBInstallDriver++ load USBD.DLL sucess! USBInstallDriver-- DLL_PROCESS_DE...
I now have a stm32f103 minimum system board and an ov7670 camera with FIFO. If I want to use the ov7670 camera with the minimum system board, can I not connect the pins directly? Do I need to make a d...
[i=s]This post was last edited by paulhyde on 2014-9-15 04:02[/i] Are you still using the built-in component library of Altium Designer? Or a self-built library? Are you worried about the lack of Step...
I originally planned to send 7E 01 01 00 01 01 04 0D. The original program was: Call: SendString_PH_START("7E 01 01 00 01 01 04 0D"); Definition: void SendString_PH_START(uchar *ptr) { for(int j=0;j<2...
There is a group of "silly kids" who are always at odds with themselves. After busy work, they often sit in front of their desks to disassemble and disassemble. The smoke from cooking is commonplace. ...
[i=s]This post was last edited by lcofjp on 2016-12-11 21:20[/i] A few years ago, I bought a rechargeable LED desk lamp in a roadside store on a whim. I probably didn't use it many times. I could hear...
This article discusses how to wake up a touch-sensitive device such as a tablet without touching the device, using basic gesture recognition and novel proximity sensors. The article discusses the p...[Details]
introduction
For the voltage regulator modules (VRMs) that power the latest computer central processing units (CPUs), power supply designers have historically used multiphase interleaved b...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
introduction
The emergence of high-performance, low-power embedded CPUs and high-reliability network operating systems has made it possible to implement applications with large amounts of comp...[Details]
A standard cell
is an electrochemical
cell
used as a voltage reference standard in many electrical standards laboratories
. If properly maintained, standard cells are very stable. The ...[Details]
1 Introduction
Water resources are the basic conditions for human survival and the lifeline of economic development. The reality shows that due to the global shortage of water resources and th...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
Almost everyone in a student dormitory has a bedside lamp. But if you want to read for a while after turning off the lights and don't want to disturb your roommates' sleep, you may need a reading l...[Details]
The fluorescent lamps and energy-saving lamps we commonly use now have greatly improved luminous efficiency compared with the earlier ordinary incandescent lamps and have been widely used. With the...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems (GP...[Details]
The capacity of a battery depends on the amount of charge and discharge, in addition to some factors of the battery itself. Obviously, if the charge and discharge of the battery can be recorded all...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
