I want to develop a driver on a board, but this board cannot be connected to the computer via serial port or network. I can only copy the program to it through SD card and run it to see the result? Is...
Xilinx Compiler Test Application Software Key Files:
1. xparameter.h fileThis file is very important because it specifies the properties and addresses of each hardware module, such as the most commonl...
How to modify kconfig Step 1: Open kconfig in the corresponding device driver directory, and then modify it: Open the kconfig in /999/linux-2.6.32.2/drivers/char: Save after modification. In the linux...
I use FM25L256. I write 0X55 in the byte space from 30001 to 30050. I write the serial number into the above unit every time I measure it. For example, if the serial number is 1 when I measure it once...