HCNR200 and HCNR201
High-Linearity Analog Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCNR200/201 high‑linearity analog optocoupler
consists of a high‑performance AlGaAs LED that illumi‑
nates two closely matched photodiodes. The input pho‑
todiode can be used to monitor, and therefore stabilize,
the light output of the LED. As a result, the non‑linearity
and drift characteristics of the LED can be virtually elimi‑
nated. The output photodiode produces a photocurrent
that is linearly related to the light output of the LED. The
close matching of the photo‑diodes and advanced de‑
sign of the package ensure the high linearity and stable
gain characteristics of the optocoupler.
The HCNR200/201 can be used to isolate analog signals
in a wide variety of applications that require good stabil‑
ity, linearity, bandwidth and low cost. The HCNR200/201
is very flexible and, by appropriate design of the appli‑
cation circuit, is capable of operating in many different
modes, including: unipolar/bipolar, ac/dc and inverting/
non‑inverting. The HCNR200/201 is an excellent solution
for many analog isolation problems.
Features
•
Low nonlinearity: 0.01%
•
K
3
(I
PD2
/I
PD1
) transfer gain
HCNR200: ±15%
HCNR201: ±5%
•
Low gain temperature coefficient: ‑65 ppm/°C
•
Wide bandwidth – DC to >1 MHz
•
Worldwide safety approval
– UL 1577 recognized (5 kV rms/1 min rating)
– CSA approved
– IEC/EN/DIN EN 60747‑5‑2 approved
V
IORM
= 1414 V
peak
(option #050)
•
Surface mount option available (Option #300)
•
8‑Pin DIP package ‑ 0.400” spacing
•
Allows flexible circuit design
Applications
•
Low cost analog isolation
•
Telecom: Modem, PBX
•
Industrial process control:
Transducer isolator
Isolator for thermocouples 4 mA to 20 mA loop isola‑
tion
•
SMPS feedback loop, SMPS feedforward
•
Monitor motor supply voltage
•
Medical
Schematic
LED CATHODE
1
-
V
F
LED ANODE
+
2
3
I
PD1
I
PD2
I
F
7
6
NC
8
NC
PD1 CATHODE
PD2 CATHODE
PD1 ANODE
4
5
PD2 ANODE
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCNR200/HCNR201 is UL Recognized with 5000 Vrms for 1 minute per UL1577.
Option
RoHS
non RoHS
Compliant Compliant
‑000E
‑300E
HCNR200
HCNR201
‑500E
‑050E
‑350E
‑550E
no option
#300
#500
#050
#350
#550
X
X
X
X
X
Part
Number
Package
400 mil
Widebody
DIP‑8
Surface
Mount
X
X
Gull
Wing
X
X
Tape
& Reel
IEC/EN/DIN EN
UL 5000 Vrms/ 60747-5-2
1 Minute rating V
IORM
= 1414 V
peak
X
X
Quantity
42 per tube
42 per tube
750 per reel
X
X
X
X
X
X
X
X
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCNR200‑550E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/
DIN EN 60747‑5‑2 V
IORM
= 1414 V
peak
Safety Approval and UL 5000 Vrms for 1 minute rating and RoHS compliant.
Example 2:
HCNR201 to order product of 8‑Pin Widebody DIP package in Tube packaging with UL 5000 Vrms for 1 minute rating
and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
2
Package Outline Drawings
11.30 (0.445)
MAX.
8
7
6
5
0.20 (0.008)
0.30 (0.012)
A
HCNR200
yyww
EEE
MARKING
9.00
(0.354)
TYP.
11.00
(0.433)
MAX.
10.16
(0.400)
TYP.
0°
15°
LOT ID
4
*
PIN
ONE
1
2
3
1.50
(0.059)
MAX.
5.10 (0.201) MAX.
1
2
LED
NC
NC
8
7
0.51 (0.021) MIN.
3
3.10 (0.122)
3.90 (0.154)
0.40 (0.016)
0.56 (0.022)
2.54 (0.100) TYP.
4
K
1
K
2
6
5
1.70 (0.067)
1.80 (0.071)
PD1
PD2
DIMENSIONS IN MILLIMETERS AND (INCHES).
MARKING :
yy
- Year
ww
- Work Week
Marked with black dot - Designates Lead Free option E
XXX = 050 ONLY if option #050,#350,#550 (or -050,-350,-550)
ordered (otherwise blank)
*
- Designates pin 1
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Figure 1a. 8 PIN DIP
3
Solder Reflow Temperature Profile
300
PREHEATING RATE 3
°C
+ 1
°C/–0.5 °C/SEC.
REFLOW HEATING RATE 2.5
°C
± 0.5
°C/SEC.
PEAK
TEMP.
245
°C
PEAK
TEMP.
240
°C
200
TEMPERATURE (°C)
160
°C
150
°C
140
°C
3
°C
+ 1
°C/–0.5 °C
100
2.5 C ± 0.5
°C/SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
230
°C
SOLDERING
TIME
200
°C
PREHEATING TIME
150
°C,
90 + 30 SEC.
ROOM
TEMPERATURE
0
0
50
100
TIME (SECONDS)
NOTE: NON-HALIDE FLUX SHOULD BE USED.
150
50 SEC.
TIGHT
TYPICAL
LOOSE
200
250
Recommended Pb-Free IR Profile
TIME WITHIN 5
°C
of ACTUAL PEAK TEMPERATURE
t
p
T
p
T
L
TEMPERATURE
T
smax
T
smin
t
s
PREHEAT
60 to 180 SEC.
25
t
L
60 to 150 SEC.
* 245 +0/-5
°C
217
°C
150 - 200
°C
RAMP-UP
3
°C/SEC.
MAX.
RAMP-DOWN
6
°C/SEC.
MAX.
NOTES:
THE TIME FROM 25
°C
to PEAK
TEMPERATURE = 8 MINUTES MAX.
T
smax
= 200
°C,
T
smin
= 150
°C
NOTE: NON-HALIDE FLUX SHOULD BE USED.
t 25
°C
to PEAK
TIME
15 SEC.
Regulatory Information
The HCNR200/201 optocoupler features a 0.400” wide, eight pin DIP package. This package was specifically designed
to meet worldwide regulatory requirements. The HCNR200/201 has been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, FILE E55361
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324
IEC/EN/DIN EN 60747-5-2
Approved under
IEC 60747‑5‑2:1997 + A1:2002
EN 60747‑5‑2:2001 + A1:2002
DIN EN 60747‑5‑2 (VDE 0884 Teil 2):2003‑01
(Option 050 only)
5
Embedded System
京公网安备 11010802033920号
EEWORLD
