• Ideal for switching power in household appliances or for
outputs from industrial devices.
• Subminiature dimensions: 16
×
22
×
11 mm (L
×
W
×
H).
• High-sensitivity models available with low power
consumption (150 mW).
• Standard model conforms to UL/CSA standards.
• Sealed models are available
• Quick-connect terminal models are also available (#187
load contact terminals).
• IEC/EN 60335-1 conformed. (-HA Model)
RoHS Compliant
■Model
Number Legend
1 2 3 4 5 6
1. Number of Poles
4. Classification
1A: 1-pole/SPST-NO (1a)
None: Standard
E:
High-capacity
2. Enclosure rating
5. Coil consumption
None: Flux protection
4:
Sealed
None: Standard
H:
High-sensitivity
3. Terminal Shape
None: PCB terminals
6. Market Code
TP: Quick-connect
None: General purpose
terminals (#187)
HA: Home Appliance
according to
IEC/EN60335-1
■Application
Examples
• Small home appliances
G 5 C A - 1 A@
-@ -@ -
@- @
—— — — — — —
G
5
C
A
■Ordering
Information
Terminal Shape
Market Code
Classification
Standard
General purpose
PCB terminals
Home Appliance
High-capacity
Quick-connect
terminals (#187)
General purpose
Flux protection
G5CA-1A-TP-E
High-sensitivity
SPST-NO (1a)
Contact form
Enclosure rating
Flux protection
Sealed
Flux protection
Sealed
Model
G5CA-1A
G5CA-1A4
G5CA-1A-H
G5CA-1A4-H
G5CA-1A-E
G5CA-1A-E-HA
Rated coil voltage Minimum packing unit
5VDC
12VDC
24VDC
12VDC
24VDC
5VDC
12VDC
24VDC
20 pcs/Tube
Note 1. When ordering, add the rated coil voltage to the model number.
Example: G5CA-1A DC5
Rated coil voltage
However, the notation of the coil voltage on the product case as well as on the packing will be marked as
@@
VDC.
Note 2. Contact your OMRON representative for details on other coil voltage specifications.
Note 3. High-capacity models with sealed structure are not available.
Note 4. Standard or high-sensitivity models with quick-connect terminals are not available.
■Ratings
●Coil
Item
Classification
Standard,
high-capacity,
or quick-connect
terminals
High-sensitivity
Rated voltage
5 VDC
12 VDC
24 VDC
5 VDC
12 VDC
24 VDC
Rated current Coil resistance
(mA)
(Ω)
40
16.7
8.3
30
12.5
6.25
125
720
2,880
167
960
3,840
80% max.
10% min.
Must-operate voltage
(V)
Must-release voltage
(V)
% of rated voltage
10% min.
Max. voltage
(V)
150% (standard)/
130% (high-capacity,
quick-connect terminals)
(at 23°C)
150%
(at 23°C)
Power consumption
(mW)
75% max.
Approx. 200
Approx. 150
Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of
±10%.
Note 2. The operating characteristics are measured at a coil temperature of 23°C.
Note 3. The “maximum voltage” is the maximum voltage that can be applied to the relay coil.
1
G5CA
●Contacts
Classification
Item
Contact type
Contact material
Rated load
Rated carry current
Max. switching voltage
Max. switching current
Load
Standard
Inductive load
Resistive load
(cosφ = 0.4, L/R = 7 ms)
High-sensitivity
Inductive load
Resistive load
(cosφ = 0.4, L/R = 7 ms)
Single
Ag-alloy (Cd free)
10 A at 250 VAC; 3 A at 250 VAC;
10 A at 30 VDC
3 A at 30 VDC
10 A
250 VAC, 125 VDC
10 A
PCB Power Relay
High-capacity, or quick-connect terminals
Inductive load
Resistive load
(cosφ = 0.4, L/R = 7 ms)
10 A at 250 VAC;
10 A at 30 VDC
3 A at 250 VAC;
3 A at 30 VDC
10 A
10 A
15 A at 110 VAC;
10 A at 30 VDC
5 A at 110 VAC;
3 A at 30 VDC
15 A
15 A
■Characteristics
Contact resistance *1
Operate time
Release time
Insulation resistance *2
Between coil
and contacts
Dielectric Between
strength
contacts of
the same
polarity
Impulse withstand
voltage
30 mΩ max.
(Quick-connect terminals type: 100 mΩ max.)
10 ms max.
15 ms max. (High-Sensitivity models)
10 ms max.
1,000 MΩ min.
2,500 VAC, 50/60 Hz for 1 min
■Engineering
Data
●Maximum
Switching Capacity
●Durability
Switching current (A)
50
30
15
10
7
5
3
DC resistive load
G5CA-1A
G5CA-1A-E
Durability (× 10
4
operation)
AC resistive load AC resistive load
AC抵抗負荷 AC inductive load
G5CA-1A-E
G5CA-1A
½G5C
G5CA-1A-E
(cosφ=0.4）
500
300
250 VAC resistive load
100
70
50
30
110 VAC resistive load
1,000 VAC, 50/60 Hz for 1 min
1
0.7
0.5
0.3
DC inductive load
G5CA-1A
AC inductive load
G5CA-1A-E
G5CA-1A
(L/R=7ms)
(cosφ=0.4)
1
3
5 7 10
30 50 100
300 500 1,000
Switching
voltage
(V)
10
7
5
3
30 VDC resistive load
4,500 V (1.2 x 50
μs)
10 to 55 to 10 Hz, 0.75-mm single amplitude
(1.5-mm double amplitude)
10 to 55 to 10 Hz, 0.75-mm single amplitude
(1.5-mm double amplitude)
1,000 m/s
2
200 m/s
2
20,000,000 operations min. at 18,000
operations/hr
Resistive load
• Standard model
250 VAC 10 A, 300,000 operations min.
(100,000 operations min. for sealed and
high-sensitivity models)
• High capacity and quick-connect
terminals
110 VAC 15A, 100,000 operations min.
• For all models
30 VDC 10 A, 100,000 operations
Inductive load
100,000 operations min. for all models
(rated load)
[Switching frequency at 1,200 operations/h (for
all models)]
5 VDC, 100 mA
-25°C to 70°C (with no icing or condensation)
5% to 85%
Approx. 8 g (for TP model: Approx. 9.6 g)
0.1
1
0
2
4
6
8
G
5
C
A
Vibration
resistance
Destruction
Malfunction
Must-operate/must-release voltage (%)
Maximum coil
voltage
(%)
Destruction
Shock
resistance Malfunction
Mechanical
●
Ambient Temperature vs.
Maximum Coil Voltage
200
180
Continuous max.
permissile
voltage
(10 A)
●
Operating Temperature vs.
Must-operate/Must-release
Voltage
100
Sample: G5CA-1A
Number of Relays: 5 pcs
10
12
14 16
Switching current (A)
Must-operate voltage
Must-release voltage
80
max.
X
60
min.
160
150
140
130
120
40
max.
X
Durability
Electrical
100
Continuous max.
permissile
voltage
(15 A)
20
min.
80
60
0
−40
0
20
30
40
50
60
70
80
90
Ambient temperature (°C)
−20
0
20
40
60
80
Ambient temperature (°C)
Note. The "maximum voltage" is the
maximum voltage that can be applied
to the relay coil.
●Shock
Malfunction
Y
1,000 min.
800
1,000 min.
X
600
400
200
Failure rate (P level)
(Reference value *3)
Ambient Operating
temperature
Ambient Operating
humidity
Weight
Unit: m/s
2
1,000 min.
Z
200
400
Z'
1,000 min.
600
800
1,000 min.
Y'
X'
1,000 min.
Shock direction
X
X'
Y
Z
Z'
Y'
Note. Values in the above table are the initial values at 23•C.
*1. Measurement conditions: 5 VDC, 1 A, voltage drop method.
*2. Measurement conditions: Measured at the same points as the
dielectric strength using a 500 VDC ohmmeter.
*3. This value was measured at a switching frequency of 120 operations/min.
Sample:
G5CA-1A
Number of Relays: 10 pcs
Measured value: The value at which
malfunction occurs in
the contact when the
contact is subjected to
shock three times
each in six directions
for three axes.
Standard:
200 m/s
2
2
G5CA
■Dimensions
G5CA-1A(4)
G5CA-1A(4)-H
G5CA-1A-E(-HA)
11 max.
(10.9)*
3.5
1.6
10.16
7.62
0.4
0.4
12.7
* Average value
Two, 1 dia.
elliptic holes
2
10.16
17.78
PCB Power Relay
22 max.
(21.9)*
16 max.
(15.9)*
PCB Mounting Holes
(BOTTOM VIEW)
Tolerance: ±0.1 mm
2.54
Two, 1 dia. hole
Terminal Arrangement/
Internal Connections
(BOTTOM VIEW)
2.54
12.7
1
2
0.4
4
3
(No coil polarity)
Note. Orientation marks are indicated
as follows:
G5CA-1A-TP-E
25.1 max.
(24.9)*
1
3.2
11
(10.9)*
5
3.5
0.3
16.1
5
* Average value
0.4
1.35
6.35
13.4
4.8
1.3 dia.
22.1 max.
(21.9)*
10°
±1°
0.5
PCB Mounting Holes
(BOTTOM VIEW)
Tolerance: ±0.1 mm
Two, 1 dia.
1.8
Terminal Arrangement/
Internal Connections
(BOTTOM VIEW)
Four, 1.2 dia.
elliptic holes
4
3
17.78
6.25
2
0.5
14.25
17.78
0.6
14.25
(TOP VIEW)
1.6
16.1
21.1
5
1
(BOTTOM VIEW)
(No coil polarity)
■Approved
Standards
●The
following UL-, CSA-, and EN/TÜV-certifying ratings differ from the performance characteristics of the individual models.
UL Recognized:
(File No. E41515)
CSA Certified:
(File No. LR31928)
Model
Contact
form
Coil
ratings
Contact ratings
15 A, 125 VAC (General purpose)
at 40°C
10 A, 250 VAC (General purpose)
at 40°C
10 A, 30 VDC (Resistive) at 40°C
Number of
test
operations
Model
Contact
form
Coil
ratings
Contact ratings
15 A, 125 VAC (General purpose)
at 40°C
10 A, 250 VAC (General purpose)
at 40°C
10 A, 30 VDC (Resistive) at 40°C
Number of
test
operations
G
5
C
A
G5CA
SPST-NO
(1a)
5 to 24
VDC
100,000
G5CA
SPST-NO
(1a)
5 to 24
VDC
100,000
EN Certified/TÜV
(Certificate No. R50214486)
Model
Contact
form
Coil
ratings
Contact ratings
Number of
test
operations
G5CA
SPST-NO
(1a)
15 A, 125 VAC (cosφ = 1.0) at
85°C
5, 12,
10 A, 250 VAC (cosφ = 1.0) at
24 VDC
85°C
10 A, 30 VDC (0 ms) at 85°C
100,000
Clearance distance
Creepage distance
Insulation material group
Type of insulationcoil-contact circuit
open contact circuit
Rated Insulation voltage
Pollution degree
Rated voltage system
Over voltage category
Category of protection according to
IEC 61810-1
Glow wire according to
IEC 60335-1 ed.5
Tracking resistance according to
IEC 60112
1.6 mm min.
3.2 mm min.
IIIa
Basic
Micro disconnection
250 V
2
250 V
II
RT II (Flux protection) /
RT III (Sealed)
<HA Models only>
GWT 750°C min. (IEC 60695-2-11) /
GWFI 850°C min. (IEC 60695-2-12)
PTI 250 V min. (housing parts)
3
G5CA
■Precautions
●Please
refer to “PCB Relays Common Precautions” for correct use.
PCB Power Relay
Correct Use
●
Mounting
• Make sure that sufficient space is
provided between relays when
installing two or more relays side by
side to facilitate heat dissipation.
Insufficient heat dissipation may result
in the relay malfunctioning.
●
Quick-connect Terminal
Connections
• Do not pass current through the PCB
of the load contact terminals
(quick-connect terminals).
• The terminals are compatible with
Faston receptacle #187 and are
suitable for positive-lock mounting.
Use only Faston terminals with the
specified numbers. Select leads for
connecting Faston receptacles with
wire diameters that are within the
allowable range for the load current.
Do not apply excessive force to the
terminals when mounting or
dismounting the Faston receptacle.
Insert and remove terminals carefully
one at a time. Do not insert terminals
on an angle, or insert/remove multiple
terminals at the same time.
The following positive-lock connectors
made by AMP are recommended.
Contact the manufacturer directly for
details on connectors including
availability.
Type
Receptacle
terminals *
AMP 170330-1
(170324-1)
AMP 170331-1
(170325-1)
AMP 170332-1
(170326-1)
Positive housing
AMP 172074-1
(natural color)
AMP 172074-4
(yellow)
AMP 172074-5
(green)
AMP 172074-6
(blue)
Pitch:
2.54 mm × 4 min.
between terminals
●
Charged Terminals
• The section marked with dotted circles
(indicated by arrows) in the following
diagram includes the charged
terminals of the relay.
When the relay is mounted on a PCB,
make sure that there are no metal
patterns on the section of the PCB
facing the portion of the relay shaded
in the following diagram.
Pitch: 2.54 mm × 3 min.
between terminals
12.7
8
6.5
0.18
G
5
C
A
#187
terminals
(width:
4.75 mm)
●
Other Precautions
• The G5CA is a power relay designed
for applications switching power loads
such as heaters in electric household
appliances. Do not use the G5CA to
switch micro loads less than 100 mA,
such as in signal applications.
• Use fully sealed models if the relays
will require washing. Flux-protection
models may malfunction or the relay's
performance may be otherwise
adversely affected if cleaning fluid
enters the relay.
*
The numbers shown in parentheses are for
air-feeding.
•
Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
•
Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
京公网安备 11010802033920号
EEWORLD
