HCPL-7860/HCPL-786J
Optically Isolated Sigma-Delta (S-D) Modulator
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully
compliant options available;
-xxxE denotes a
lead-free
product
Description
The HCPL-7860/HCPL-786J Optically Isolated Modulator
and HCPL-0872 Digital Interface IC or digital filter together
form an isolated programmable two-chip analog-to-digital
converter. The isolated modulator allows direct measure-
ment of motor phase currents in power inverters.
In operation, the HCPL-7860/HCPL-786J Isolated Modula-
tor converts a low-bandwidth analog input into a high-
speed one-bit data stream by means of a Sigma-Delta
(6') over-sampling modulator. This modulation provides
for high noise margins and excellent immunity against
isolation-mode transients. The modulator data and on-
chip sampling clock are encoded and transmitted across
the isolation boundary where they are recovered and de-
coded into separate high-speed clock and data channels.
Features
x
12-bit Linearity
x
200 ns Conversion Time
(Pre-Trigger Mode 2 with HCPL-0872)
x
12-bit Effective Resolution with 5
Ps
Signal Delay
(14-bit with 102
Ps)
(with HCPL-0872)
x
Fast 3
Ps
Over-Range Detection (with HCPL-0872)
x
± 200 mV Input Range with Single 5 V Supply
x
1% Internal Reference Voltage Matching
x
Offset Calibration (with HCPL-0872)
x
-40°C to +85°C Operating Temperature Range
x
15 kV/Ps Isolation Transient Immunity
x
Safety Approval: UL 1577, CSA and IEC/EN/DIN EN
60747-5-2
Applications
x
Motor Phase and Rail Current Sensing
x
Data Acquisition Systems
x
Industrial Process Control
x
Inverter Current Sensing
x
General Purpose Current Sensing and Monitoring
1
2
Input
Current
3
4
HCPL-7860
SIGMA
DELTA
MOD./
ENCODE
8
7
DECODE
6
HCPL-0872
or
Digital Filter
MCU
or
DSP
5
NOTE: A 0.1 μF bypass capacitor must be connected between pins VDD1 and GND1 and between pins VDD2 and GND2.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation, which may be induced by ESD.
Pin Description
ISOLATION
BOUNDARY
V
DD1
V
IN+
V
DD1
1
SIGMA-
DELTA
MOD./
ENCODE
8
7
DECODE
6
5
MDAT
GND2
V
DD2
MCLK
V
IN-
NC
NC
NC
NC
GND1
1
2
3
4
5
6
7
8
SIGMA-
DELTA
MOD./
ENCODER
DECODER
16
15
14
13
12
11
10
9
GND2
NC
V
DD2
MCLK
NC
MDAT
NC
GND2
V
IN+
2
V
IN-
3
GND1 4
SHIELD
HCPL-7860
Symbol
V
DD1
V
IN+
V
IN-
GND1
HCPL-786J
Symbol
V
DD2
MCLK
MDAT
GND2
Description
Supply voltage input (4.5 V to 5.5 V)
Positive input (± 200 mV recommended)
Negative input (normally connected to GND1)
Input ground
Description
Supply voltage input (4.5 V to 5.5 V)
Clock output (10 MHz typical)
Serial data output
Output ground
Note: NC = No connection. Leave floating.
Ordering Information
HCPL-7860 is UL Recognized with 3750 Vrms for 1 minute per UL1577. HCPL-786J is UL Recognized with 5000 Vrms for
1 minute per UL1577.
Option
Part number
HCPL-7860
RoHS
Compliant
-000E
-300E
-500E
Non-RoHS
Compliant
No option
#300
#500
No option
#500
Package
300 mil
DIP-8
Surface
Mount
X
X
Gull
Wing
X
X
Tape
& Reel
IEC/EN/DIN EN
60747-5-2
X
X
Quantity
50 per tube
50 per tube
1000 per reel
45 per tube
850 per reel
X
X
X
X
X
HCPL-786J
-000E
-500E
SO-16
X
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-7860-500E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN
EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-786J to order product of SO-16 package in tube packaging and non-RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE’.
2
Package Outline Drawings
8-pin DIP Package
9.80 ± 0.25
(0.386 ± 0.010)
8
7
6
5
TYPE NUMBER
REFERENCE VOLTAGE
MATCHING SUFFIX*
DATE CODE
A 7860X
YYWW
PIN ONE
1.19 (0.047) MAX.
1
2
3
4
1.78 (0.070) MAX.
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
5° TYP.
0.20 (0.008)
0.33 (0.013)
DIMENSIONS IN MILLIMETERS AND (INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20mils) MAX.
NOTE: INITIAL OR CONTINUED VARIATION IN THE COLOUR OF THE HCPL-7860/HCPL-786J’S WHITE MOLD
COMPOUND ISNORMAL AND DOES NOT AFFECT DEVICE PERFORMANCE OR RELIABILITY.
*ALL UNITS WITHIN EACH HCPL-7860 STANDARD PACKAGING INCREMENT (EITHER 50 PER TUBE OR 1000 PER
REEL) HAVEA COMMON MARKING SUFFIX TO REPRESENT A REFERENCE VOLTAGE MATCHING OF ± 1%. AN
ABSOLUTEREFERENCE VOLTAGE TOLERANCE OF ± 4% IS GUARANTEED BETWEEN STANDARD PACKAGING
INCREMENTS.
3
8-pin Gull Wing Surface Mount Option 300
LAND PATTERN RECOMMENDATION
9.80 ± 0.25
(0.386 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
2.0 (0.080)
1.27 (0.050)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
1.19
(0.047)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
0.20 (0.008)
0.33 (0.013)
1.080 ± 0.320
(0.043 ± 0.013)
2.540
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
TOLERANCES (UNLESS OTHERWISE SPECIFIED):
0.51 ± 0.130
(0.020 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
xx.xx = 0.01
xx.xxx = 0.005
LEAD COPLANARITY
MAXIMUM: 0.102 (0.004)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
16-Lead Surface Mount
LAND PATTERN RECOMMENDATION
0.457
(0.018)
16 15 14 13 12 11 10
9
TYPE NUMBER
DATE CODE
A 786J
YYWW
7.493 ± 0.254
(0.295 ± 0.010)
11.63 (0.458)
1.270
(0.050)
0.64 (0.025)
2.16 (0.085)
1
2
3
4
5
6
7
8
ALL LEADS
TO BE
COPLANAR
± 0.002
10.312 ± 0.254
(0.406 ± 0.10)
9°
8.763 ± 0.254
(0.345 ± 0.010)
0.457
(0.018)
3.505 ± 0.127
(0.138 ± 0.005)
0-8°
0.025 MIN.
10.363 ± 0.254
(0.408 ± 0.010)
0.203 ± 0.076
(0.008 ± 0.003)
STANDOFF
DIMENSIONS IN MILLIMETERS AND (INCHES).
NOTE: Initial and continued variation in the color of the HCPL-786J's white mold compound is normal
and does not affect device performance or reliability.
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
4
Solder Reflow Temperature Profile
300
PREHEATING RATE 3˚C + 1˚C/-0.5˚C/SEC.
REFLOW HEATING RATE 2.5˚C ± 0.5˚C/SEC.
PEAK
TEMP.
245˚C
PEAK
TEMP.
240˚C
200
TEMPERATURE (˚C)
160˚C
150˚C
140˚C
PEAK
TEMP.
230˚C
2.5˚C ± 0.5˚C/SEC.
30
SEC.
3˚C + 1˚C/-0.5˚C
30
SEC.
SOLDERING
TIME
200˚C
100
PREHEATING TIME
150˚C, 90 + 30 SEC.
50 SEC.
TIGHT
TYPICAL
LOOSE
0
0
50
100
TIME (SECONDS)
150
200
250
ROOM
TEMPERATURE
Note: Use of non-chlorine-activated fluxes is highly recommended.
Recommended Lead Free IR Profile
tp
T
p
TEMPERATURE (˚C)
TIME WITHIN 5˚C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
260 +0/-5˚C
217˚C
RAMP-UP
3˚C/SEC. MAX.
150 - 200˚C
T
L
T
smax
T
smin
RAMP-DOWN
6˚C/SEC. MAX.
t
s
PREHEAT
60 to 180 SEC.
25
t
L
60 to 150 SEC.
t 25˚C to PEAK
TIME (SECONDS)
NOTES:
THE TIME FROM 25˚C to PEAK TEMPERATURE = 8 MINUTES MAX.
T
smax
= 200˚C, T
smin
= 150˚C
Note: Use of non-chlorine-activated fluxes is highly recommended.
Regulatory Information
The HCPL-7860/HCPL-786J has been approved by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2
(VDE 0884 Teil 2):2003-01.
5
UL
Approval under UL 1577, component recognition pro-
gram. File E55361.
CSA
Approval under CSA Component Acceptance Notice #5,
File CA 88324.
京公网安备 11010802033920号
EEWORLD
