* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
Applications
■
Power supplies
■
Stepper motor drives
CRS-A Series High Power Anti-Surge Resistor
How to Order
CRS 0603 A F X - 1002 E LF
Model
(CRS = High Power Anti-Surge Resistor)
Size
0603 = 0603 Size
0805 = 0805 Size
1206 = 1206 Size
1210 = 1210 Size
2010 = 2010 Size
2512 = 2512 Size
Feature
A = AEC-Q200 Compliant
Resistance Tolerance
F = ±1 %
J = ±5 %
TCR (See Electrical Characteristics chart)
• W = ±200 PPM/°C
• X = ±100 PPM/°C NOTE: CRS0805A 0.5%, 1 ohm to 9.76 ohms: 150 PPM/°C
Resistance Value
• 1 % Tolerance:
<100 ohms ............“R” represents decimal point
(example: 24R3 = 24.3 ohms)
≥100
ohms ............First three digits are significant, fourth digit represents number of zeros to follow
(example: 8252 = 82.5K ohms)
• 5 % Tolerance:
<10 ohms..........“R” represents decimal point
(example: 4R7 = 4.7 ohms)
ohms ..........First two digits are significant, third digit represents number of zeros to follow
(example: 474 = 470K ohms)
≥10
Packaging
• E = 5,000 pieces on 180 mm (7 inch) reel, paper tape - CRS0603A, CRS0805A, CRS1206A, CRS1210A
4,000 pieces on 180 mm (7 inch) reel, plastic tape - CRS2010A, CRS2512A
Termination
• LF = Tin-plated (RoHS Compliant)
Surge Performance
1000
PEAK POWER (WATTS)
100
10
1
CRS2512A
CRS2010A
CRS1210A
CRS1206A
CRS0805A
CRS0603A
0.1
0.0001
0.001
0.01
0.1
1
PULSE DURATION (SECONDS)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
CRS-A Series High Power Anti-Surge Resistor
Typical Part Marking
CRS0603A, CRS0805A,
CRS1206A, CRS1210A,
CRS2010A, CRS2512A
E96 ±5 %
3 digits identify the
resistance value
CRS0805A, CRS1206A,
CRS1210A, CRS2010A,
CRS2512A
E24 / E96 ±1 %
4 digits identify the
resistance value
CRS0603A
E24 ±1 %
3 digits identify the
resistance value
CRS0603A
E96 ±1 %
3 digits identify the
resistance value
301
301 = 30 x 10
1
= 300 ohms
1542
1542 = 154 x 10
2
= 15.4K ohms
222
222 = 22 x 10
2
= 2.2K ohms
01B
01B = 1K ohms
(Refer to Marking Table below)
E96 Marking for CRS0603A, 1 %
Code R Value
01
02
03
04
05
06
07
08
09
10
11
12
100
102
105
107
110
113
115
118
121
124
127
130
Code
13
14
15
16
17
18
19
20
21
22
23
24
R Value
133
137
140
143
147
150
154
158
162
165
169
174
Code
25
26
27
28
29
30
31
32
33
34
35
36
R Value
178
182
187
191
196
200
205
210
215
221
226
232
Code
37
38
39
40
41
42
43
44
45
46
47
48
R Value Code
237
243
249
255
261
267
274
280
287
294
301
309
49
50
51
52
53
54
55
56
57
58
59
60
R Value
316
324
332
340
348
357
365
374
383
392
402
412
Code R Value
61
62
63
64
65
66
67
68
69
70
71
72
422
432
442
453
464
475
487
499
511
523
536
549
Code
73
74
75
76
77
78
79
80
81
82
83
84
R Value
562
576
590
604
619
634
649
665
681
698
715
732
Code R Value
85
86
87
88
89
90
91
92
93
94
95
96
750
768
787
806
825
845
866
887
909
931
953
976
This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier:
A=10
0
B=10
1
C=10
2
D=10
3
E=10
4
F=10
5
G=10
-6
H=10
-7
X=10
-1
Y=10
-2
Z=10
-3
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
CRS-A Series High Power Anti-Surge Resistor
Performance Characteristics (AEC-Q200)
Test
High Temperature
Exposure Storage
Temperature Cycling
Moisture Resistance
Biased Humidity
Operational Life
Mechanical Shock
Vibration
Resistance to Solder Heat
Thermal Shock
ESD
Solderability
Flammability
Board Flex
Terminal Strength
Sulfur-resistant
(Applies only when
R
≥1
ohm)
Method
AEC-Q200 Table 7.3
AEC-Q200 Table 7.4
AEC-Q200 Table 7.6
AEC-Q200 Table 7.7
AEC-Q200 Table 7.8
AEC-Q200 Table 7.13
AEC-Q200 Table 7.14
AEC-Q200 Table 7.15
AEC-Q200 Table 7.16
AEC-Q200-002
AEC-Q200 Table 7.18
AEC-Q200 Table 7.20
AEC-Q200 Table 7.21
AEC-Q200 Table 7.22
ASTM B-809
Procedure
1,000 hours @ +125 °C; no power loading
-55 °C to +125 °C, 1,000 cycles
+65 °C / 80~100 % RH / 10 cycles
1,000 hours @ +85 °C / 85 % RH,
10 % operating power
1,000 hours @ +125 °C, at specified rated power
100 g, half-sine, 6 ms, velocity: 12.3 ft./sec.
5 g for 20 minutes, 12 cycles each of 3 durations;
10~200 Hz
+270 °C ±5 °C, 10 ±1 seconds
-55 °C to +155 °C, dwell time 15 minutes, max. transfer
time 20 seconds/300 cycles
1 kV min.
a) Backing +155 °C, 4 hours, dipping +235 °C, 5 seconds
[i=s]This post was last edited by tianshuihu on 2015-1-8 00:47[/i] GPS positioning can only obtain information about the current location. If the information cannot be uploaded, its application will b...
The size of the external interrupt handler is more than 100 assembly instructions. In order to ensure the shortest interrupt processing time, 48 MHz main frequency is used, but it still takes a lot of...
As the title says, UART1-4 all have corresponding DMA channels, but UART5 does not have one. So I'm wondering if it's missing from the manual or if it just doesn't exist?...
Abstract: This paper introduces the design ideas and methods of system power supply based on M6800 series microcontrollers, as well as the methods to eliminate the power frequency interference which h...
I have a question for you! I am using PDIUSBD12 and connecting to the host through SoftConnect. The host displays "Unrecognized USB Device". Then the microcontroller program receives a reset signal an...
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
0. Introduction
In daily life, we often see some special-purpose vehicles. When these vehicles pass through intersections, they often obtain the right of way at intersections by temporarily op...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
introduction
The emergence of high-performance, low-power embedded CPUs and high-reliability network operating systems has made it possible to implement applications with large amounts of comp...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
1 Introduction
Water resources are the basic conditions for human survival and the lifeline of economic development. The reality shows that due to the global shortage of water resources and th...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
Printed circuit boards ( PCBs
)
are used in most electrical products
. If a PCB has low
insulation resistance
(IR), the performance of the circuits on the PCB will be greatly reduced...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]