“Countdown” print indicates available cable remaining on
the reel providing easier inventory management
Stackable boxes make storage more manageable
Smaller reel offerings mean smaller cable lengths than
would normally be available
Cable cutting at Corning lowers operating expenses for
our distributors and end users
Reel in a Box is Corning’s innovative packaging solution
for small reels of fiber optic cable in all inside plant ap-
plications, such as collocation data centers and wireless
projects. This packaging solution provides features that
enable our customers greater efficiencies than before.
Corning zipcord cables are designed for interconnect
applications. Two 900 μm TBII
®
buffered fibers are
surrounded by aramid yarn strength members and a
flame-retardant jacket. This cable design offers mechan-
ical durability and flame resistance that meet the require-
ments of the National Electrical Code
®
(NEC) Article 770.
Standards
Approval and Listings
National Electrical Code
®
(NEC
®
) OFNR, CSA FT-4,
ICEA S-83-596
UL-1666 (for riser and gen-
eral building applications)
Flame Resistance
Reel In A Box, Zipcord Riser Cables
Zipcord Riser Cables, 2-Fibers
| Photo PIM2495
Family Spec Sheet 0126_NAFTA_AEN
Page 1 | Revision date 2014-08-08
Reel In A Box, Zipcord Tight-Buffered Cable,
Riser
Flame-Retardant
Outer Jacket
Tight-Buffered
Fiber
Dielectric Strength
Members
Zipcord Riser Cables, 2-Fiber
Specifications
Temperature Range
Storage
Operation
-40 °C to 70 °C (-40 °F to 158 °F)
-20 °C to 70 °C (-4 °F to 158 °F)
*
Note: Corning recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation tempera-
ture range specifications for best installation results.
Max. Tensile Strength, Short-Term
Max. Tensile Strength, Long-Term
220 N (50 lbf)
66 N (15 lbf)
Mechanical Characteristics Cable
Fiber Count
Nominal Outer Diameter
Min. Bend
Radius Instal-
lation
50 mm
(2 in)
50 mm
(2 in)
50 mm
(2 in)
Min. Bend
Radius Opera-
tion
8 mm
(0.3 in)
14 mm
(0.55 in)
10 mm
(0.4 in)
Weight
Product Type
Multimode
2
2
2
1.6 mm x 3.3 mm
(0.06 in x 0.13 in)
2.8 mm x 5.6 mm
(0.11 in x 0.22 in)
2.0 mm x 4 mm
(0.08 in x 0.16 in)
4.6 kg/km
(3.1 lb/1000 ft)
12.8 kg/km
(8.5 lb/1000 ft)
6.7 kg/km
(4.5 lb/1000 ft)
Interconnect
Interconnect
Interconnect
*
Installed single-mode minimum bend radius of 20 mm is acceptable with a length no longer than 1 m subjected to the bend.
Family Spec Sheet 0126_NAFTA_AEN
Page 2 | Revision date 2014-08-08
Reel In A Box, Zipcord Tight-Buffered Cable,
Riser
Mechanical Characteristics Cable
Fiber Count
Nominal Outer Diameter
Min. Bend
Radius Instal-
lation
50 mm
(2 in)
50 mm
(2 in)
50 mm
(2 in)
Min. Bend
Radius Ope-
ration
25 mm
(1 in)
25 mm
(1 in)
25 mm
(1 in)
Weight
Product Type
Single-Mode
2
2
2
1.6 mm x 3.3 mm
(0.06 in x 0.13 in)
2.0 mm x 4 mm
(0.08 in x 0.16 in)
2.8 mm x 5.6 mm
(0.11 in x 0.22 in)
4.6 kg/km
(3.1 lb/1000 ft)
6.7 kg/km
(4.5 lb/1000 ft)
12.8 kg/km
(8.5 lb/1000 ft)
Interconnect
Interconnect
Interconnect
*
Installed single-mode minimum bend radius of 20 mm is acceptable with a length no longer than 1 m subjected to the bend.
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Transmission Performance
Multimode
Fiber Core Diameter
(
µm
)
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Serial 1 Gigabit Ethernet
(
m
)
Serial 10 Gigabit Ethernet
(
m
)
Min. Overfilled Launch (OFL)
Bandwidth
(
MHz*km
)
Minimum Effective Modal
Bandwidth (EMB)
(
MHz*km
)
Notes:
62.5
OM1
K
30
850/1300
3.4/1.0
200/500
220/-
300/550
33/-
50
OM2
T
31
850/1300
2.8/1.0
750/600
150/-
700/500
950/-
50
OM3
T
80
850/1300
2.8/1.0
1000/600
300/-
1500/500
2000/-
50
OM4
T
90
850/1300
2.8/1.0
1100/600
550/-
3500/500
4700/-
50
OM4 Extended
Distance
T
91
850/1300
2.8/1.0
1100/600
600/-
3500/500
5350/-
1)
50 µm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns around 7.5 mm radius mandrel.
2)
Improved attenuation and bandwidth options available.
3)
Bend-insensitive single-mode fibers available on request.
4)
Contact a Corning Customer Care Representative for additional information.
Family Spec Sheet 0126_NAFTA_AEN
Page 3 | Revision date 2014-08-08
Reel In A Box, Zipcord Tight-Buffered Cable,
Riser
Single-mode
Fiber Name
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
SMF-28e
®
fiber
G.652.D
E
31
1310/1383/1550
0.65/0.65/0.50
ClearCurve
®
XB**
G.652.D/G.657.A1
H
31
1310/1383/1550
0.65/0.65/0.5
Ordering Information |
Note: Contact Customer Care at 1-800-743-2675 for other options.
Note: This cable is available in 12 different jacket colors
–
blue, orange, green, brown, slate, white, red, black, yellow, violet, rose and aqua. The colored jacket
allows for easy visual identification of the cables while still providing all of the required environmental protection of an indoor/outdoor cable jacket. Black is the
standard jacket color using the part numbers shown here. Contact Customer Care at 1-800-743-2675 to order other color options.
Family Spec Sheet 0126_NAFTA_AEN
Page 4 | Revision date 2014-08-08
Reel In A Box, Zipcord Tight-Buffered Cable,
Riser
Notes
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
[align=left][color=rgb(100, 100, 100)][font=myFont, "]The practical operation of PCB design software Allegro Bluetooth speaker case, using Bluetooth speaker as an example to integrate the basic knowle...
I received the board last week, but I was busy with some things and my plan was delayed. But since I participated in this event, I have to learn it seriously. It would be a pity if I don’t make good u...
As I write this, it's a hot summer day in Texas, with temperatures reaching 95 degrees Fahrenheit ( 32 degrees Celsius). But I'm comfortable thanks to my air conditioner. Sometimes it 's like a modern...
Photoelectric encoder: ①A is rising edge, B=0, the knob turns right; ②B is rising edge, A=1, the knob turns right; ③A is falling edge, B=1, the knob turns right; ④B is falling edge, A=0, the knob turn...
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
This article will introduce a design method for a distributed control system used in a tracking car, which can perform distributed control of motor modules, sensor modules, and lighting control mod...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
Energy conservation and environmental protection are the main directions of current automotive technology research, and power batteries are the key to electric vehicle technology. Research on powe...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
