Series 181 Thru 184
Flat Pin Staked Flex Jumpers
FEATURES:
• Aries 90° Pin Staked Flex Jumpers combine thin, flexible, solid
Copper conductors embedded between layers of tough, flexible,
flame-retardant insulation.
• Consult factory for cable lengths under 2.000 [50.80].
GENERAL SPECIFICATIONS:
• Standard cable insulation is white UL VW-1, Style 2643 flame
retardant Polyester (Mylar) adhesive.
• High temperature flame retardant cable insulation is Polyimide
(Kapton) insulation with acrylic adhesive.
• Cable conductors are solid Copper with a cross-sectional area
equivalent to that of 26 gauge AWG.
• Female housing is black UL 94V-0 Glass-filled Thermoplastic
Polyester.
• Female and male “crimp-on” pins are spring-tempered Copper
Alloy 510.
• Female and male pin plating is 100µ [2.54µm] min. Tin per MIL-T-
10727 over 50µ [1.27µm] min. Nickel per QQ-N-290. Female pin
also available with 30µ [.76µm] min. Gold per MIL-G-45204 in
contact area.
• Cable current rating=3 Amps
• Cable voltage rating=300 Volts
• Cable dielectric strength=2500 Volts/mil, minimum (standard)
=4000 Volts/mil, minimum (high temp)
• Cable insulation resistance=1000 MOhms minimum (standard)
=100,000 MOhms (high temp)
Operating temperature=67 to 257°F [-55 to 105°C].
• Female housing accepts leads .024-.030 [.61-.76] square,
.150 [3.81] long minimum.
MOUNTING CONSIDERATIONS:
• Suggested PCB hole size=.032+ .002 [.81 + .05] dia.
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
**Aries reserves the right to shop with
or without a polarization stripe nless
otherwise specified by customer
A
LL
DIMENSIONS
:
INCHES
[
MILLIMETERS
]]
All tolerances ± .005 [.13]
unless otherwise specified
“A”=NO. OF CONDUCTORS X .100 [2.54]
“B”=(NO. OF CONDUCTORS -1) X .100 [2.54]
Kapton is a registered trademark for DuPont
ORDERING INFORMATION
XX-XXXX-18XXXXX
No. of
Conductors
(4-40)
Cable length
“L” in inches
(2” min. length)
Ex.: -0002- is 2”
-02.5- is 2.5”
“HT”=High temperature cable insulation
“P”=Polarization stripe included
Bend Options:
“A”=Both ends bent 90°, same direction
“B”=One male end bent 90°
“C”=Both ends bent 90°, opposite direction
“D”=One female end bent 90°
Jumper Series:
181: Male both ends
182: Male/Female (tin)
183: Female (tin) both ends
184: Male/Female (gold)
185: Female (gold) both ends
XX-XXXX-181A
XX-XXXX-181AP
XX-XXXX-181AHT
XX-XXXX-181APHT
XX-XXXX-181B
XX-XXXX-181BP
XX-XXXX-181BHT
XX-XXXX-181BPHT
XX-XXXX-181C
XX-XXXX-181CP
XX-XXXX-181CHT
XX-XXXX-181CPHT
N/A
N/A
N/A
N/A
XX-XXXX-182A
XX-XXXX-182AP
XX-XXXX-182AHT
XX-XXXX-182APHT
XX-XXXX-182B
XX-XXXX-182BP
XX-XXXX-182BHT
XX-XXXX-182BPHT
XX-XXXX-182C
XX-XXXX-182CP
XX-XXXX-182CHT
XX-XXXX-182CPHT
XX-XXXX-182D
XX-XXXX-182DP
XX-XXXX-182DHT
XX-XXXX-182DPHT
XX-XXXX-183A
XX-XXXX-183AP
XX-XXXX-183AHT
XX-XXXX-183APHT
N/A
N/A
N/A
N/A
XX-XXXX-183C
XX-XXXX-183CP
XX-XXXX-183CHT
XX-XXXX-183CPHT
XX-XXXX-183D
XX-XXXX-183DP
XX-XXXX-183DHT
XX-XXXX-183DPHT
XX-XXXX-184A
XX-XXXX-184AP
XX-XXXX-184AHT
XX-XXXX-184APHT
XX-XXXX-184B
XX-XXXX-184BP
XX-XXXX-184BHT
XX-XXXX-184BPHT
XX-XXXX-184C
XX-XXXX-184CP
XX-XXXX-184CHT
XX-XXXX-184CPHT
XX-XXXX-184D
XX-XXXX-184DP
XX-XXXX-184DHT
XX-XXXX-184DPHT
XX-XXXX-185A
XX-XXXX-185AP
XX-XXXX-185AHT
XX-XXXX-185APHT
N/A
N/A
N/A
N/A
XX-XXXX-185C
XX-XXXX-185CP
XX-XXXX-185CHT
XX-XXXX-185CPHT
XX-XXXX-185D
XX-XXXX-185DP
XX-XXXX-185DHT
XX-XXXX-185DPHT
http://www.arieselec.com • info@arieselec.com
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
UK/IRELAND/GB
TEL: +44 870 240 0249
FAX: +44 1653 600493
uking@arieselec.com
EUROPE/MAINLAND/HOLLAND
TEL: +31 78 615 94 65
11019
FAX: +31 78 615 43 11
Page1of 3
europe@arieselec.com
Rev.D
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
maychang Fun Electronics
京公网安备 11010802033920号
EEWORLD
