STSW-GLA001V1
AC switch control evaluation firmware
Data brief
Description
The STSW-GLA001V1 firmware is designed to
be used with the STEVAL-GLA001V1 insulated
AC switch control evaluation board to evaluate its
embedded TRIACs and AC switches,
implementing different control modes.
The firmware is developed from the STM32Cube
embedded software libraries for STM32F0 series
using the IAR Embedded Workbench for ARM.
The firmware also lets you interact with the
STEVAL-GLA001V1 hardware user interface and
allows the configuration of some parameters
using a PC user interface.
Features
Based on the STM32Cube embedded
software libraries
Support for the NUCLEO-F030R8 board
Configuration and independent control of
three TRIACs and AC switches embedded in
the STEVAL-GLA001V1 evaluation board:
On/Off control (DC and pulse modes)
Phase control mode
Timer mode
Hardware user interface via push-buttons
and switches
Automatic mains frequency detection at
switch-on
PC user interface through a serial terminal
as Windows HyperTerminal or Tera Term to:
configure the firmware parameters
monitor the main firmware variables
control command lines (i.e., start and
stop commands)
Thanks to the dynamic storage of the
configuration parameters in a dedicated section
of the Flash memory embedded in the STM32
microcontroller,
you
can change any parameter
any time without needing to compile and program
the MCU via third-party tools.
November 2017
DocID031235 Rev 1
1/3
www.st.com
For further information contact your local STMicroelectronics sales
office
STSW-GLA001V1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
DocID031235 Rev 1
3/3
京公网安备 11010802033920号
EEWORLD
