Currently there is an algorithm library in C++ that can be debugged on dsp using CCS. Now I want to put the library on 8168 dsp and need to convert C++ into C. There is a tool [size=5][color=#8b0000]m...
A simple square wave signal generator that can adjust the frequency with one button. The LED lights up when the frequency is out of range. The frequency range is 100-1000hz.
#include reg52.hsbit PWMOU...
IIC operation failed. I used the method of setting breakpoints in the middle of the program and found that the host detection response signal sub-function failed. I checked and there should be no prob...
I have been quiet for many days, but I have not been idle. I have done some project-related things. I have adjusted a very commonly used chip - DS12C887 (a real-time clock chip), which is produced by ...
In this example, P2.0 and P2.1 of MSP430fr6989 are selected as serial ports UCA0TXD and UCA0RXD; (There is not much code, mainly for register operations, and it is written in the main.c file in a hurr...
Because I have been in contact with PLC control before, and now I am getting started with the 8051 series due to work reasons. Now I have a PCB board of 8051F310. I would like to ask you a few questio...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Printed circuit boards ( PCBs
)
are used in most electrical products
. If a PCB has low
insulation resistance
(IR), the performance of the circuits on the PCB will be greatly reduced...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
With the rapid development of cities and the improvement of citizens' living standards, the number of various vehicles in cities is growing, and the demand for parking spaces in major commercial an...[Details]
Electric bicycles have long been a means of transportation for lower-income groups due to their affordability. The largest concentrated expense in the use of electric vehicles is the cost of replac...[Details]
The principles to be followed are as follows:
(1) In terms of component layout, related components should be placed as close as possible. For example, clock generators, crystal oscillat...[Details]
Current
measurement:
Magnetic balance Hall current
sensor
is used
. The sensor can measure AC from DC to 100kHz.
In automatic measurement and control systems, it is often nec...[Details]
0 Introduction
In the design and construction of communication systems,
communication power supply
is called the heart of the communication system. The power supply system will dire...[Details]
1. Introduction
With the rapid development of computer technology, communication technology, and integrated circuit technology, the large-scale application of field control instruments and equ...[Details]
Abstract: Based on the analysis of the characteristics of the IRIG-B (DC) code type, a design method for IRIG-B (DC) time code decoding is proposed. This method consists of a small number of periph...[Details]
Traditional synthesis techniques are increasingly unable to meet the needs of today's very large and complex FPGA designs implemented in 90nm and below process nodes. The problem is that traditio...[Details]
Stepper motors, also called steppers, use the principles of electromagnetism to convert electrical energy into mechanical energy and have been used since the 1920s. With the increasing popularity o...[Details]
In the development direction of the automotive industry, electric vehicles (EV) and hybrid electric vehicles (HEV) are becoming an obvious trend. From a technical point of view, hybrid power is mor...[Details]