: .......................................................................16 detents with 2.5 Ncm (+/- 30%) or no detents
Outer shaft
1
:......................................................................32, 16 or no detents
For 32 detents: 0.5, 1.0 or 2.0 Ncm (+/- 30%)
For 16 detents: 1.5 or 2.5 Ncm (+/- 30%)
Rotational life:
2
..................................................................1,000,000 revolutions min. with 0.5, 1.0 or 1.5 Ncm switching torque or with no detents
500,000 revolutions min. with 2.0 Ncm switching torque
300,000 revolutions min. with 2.5 Ncm switching torque
Residual switching torque (end of life): ................................90% typ.
Shaft strength: ...................................................................100 N min. push, 100 N min. pull, 50 Ncm min. bending
Fastening torque of nut: .....................................................100 Ncm max.
Shock: ...............................................................................100 G max. (MIL-STD-202G, method 213B, condition C)
Flammability:.....................................................................UL94-V0 (IP65/IP68: O-rings and non-threaded bushing gasket are UL94-HB)
Packaging Sizes
Tray: .................................................................................20 pcs. (nuts are supplied and packed separately)
Additional Data for Push Button Switch
Mechanical Data
Push button actuation force (new condition): ........................6 N (+/- 30%)
Push button switch travel: ...................................................0.5 (+/- 0.2) mm
Push button switch life:
2
......................................................200,000 actuations min.
Residual push button actuation force (end of life): ................90% typ.
Electrical Data
Contact bouncing time: ......................................................2 ms max.
Dielectric withstanding voltage to housing/shaft:..................500 VDC during 60 seconds (MIL-STD-202G, method 301)
With the continuous improvement of microcontroller performance and the reduction of costs, microcontrollers have been widely used in various fields. Especially in the control and processing of signals...
If I buy your 430USB port programmer, in addition to being able to download programs, can you provide independent drivers and calling instructions so that the programmer can be used as a tool for comm...
unsigned char i2c_read(void)
{unsigned char read_data = 0;//按照i2c协议TWCR = 0xA4;// send a start bit on i2c buswhile(!(TWCR & 0x80));// wait for confirmation of transmitTWDR = 0x92;// load address of i2...
[backcolor=rgb(222, 240, 251)]NF-03 cannot communicate properly when the distance is a little far (more than 5 meters). There is no wiring at the bottom of the antenna, and it has been adjusted to 2M ...
Preface This article and three others will analyze the IP Queue mechanism from user-mode applications to kernel-mode module programming. The titles of the three articles are: Analysis of the Linux Ker...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
1. Background:
The instrument system parameter detection and control of the chemical production workshop of Tangshan Coal Gas Coking Plant are all analog instruments, some of which are eve...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]