Spansion
®
Analog and Microcontroller
Products
The following document contains information on Spansion analog and microcontroller products. Although the
document is marked with the name “Fujitsu”, the company that originally developed the specification, Spansion
will continue to offer these products to new and existing customers.
Continuity of Specifications
There is no change to this document as a result of offering the device as a Spansion product. Any changes that
have been made are the result of normal document improvements and are noted in the document revision
summary, where supported. Future routine revisions will occur when appropriate, and changes will be noted in a
revision summary.
Continuity of Ordering Part Numbers
Spansion continues to support existing part numbers beginning with “MB”. To order these products, please use
only the Ordering Part Numbers listed in this document.
For More Information
Please contact your local sales office for additional information about Spansion memory, analog, and
microcontroller products and solutions.
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13722-11E
16-bit Microcontroller
CMOS
F
2
MC-16LX MB90480B/485B Series
MB90F481B/F482B/487B/488B/483C
MB90F488B/F489B/V480B/V485B
■
DESCRIPTION
The MB90480B/485B series is a 16-bit general-purpose FUJITSU SEMICONDUCTOR microcontroller designed
for process control in consumer devices and other applications requiring high-speed real-time processing.
The F
2
MC-16LX CPU core instruction set retains the AT architecture of the F
2
MC*
1
family, with additional instruc-
tions for high-level languages, expanded addressing mode, enhanced multiply-drive instructions, and complete
bit processing. In addition, a 32-bit accumulator is provided to enable long-word processing.
The MB90480B/485B series features embedded peripheral resources including 8/16-bit PPG, expanded I/O serial
interface, UART, 10-bit A/D converter, 16-bit I/O timer, 8/16-bit up/down-counter, PWC timer, I
2
C interface, DTP/
external interrupt, chip select, and 16-bit reload timer.
*1 : F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
■
FEATURES
• Clock
Minimum instruction execution time: 40.0 ns/6.25 MHz base frequency multiplied
×
4 (25 MHz internal operating
frequency/3.3 V
±
0.3 V)
62.5 ns/4 MHz base frequency multiplied
×
4 (16 MHz internal operating
frequency/3.0 V
±
0.3 V) PLL clock multiplier
• Maximum memory space: 16 Mbytes
(Continued)
The information for microcontroller supports is shown in the following homepage.
Be sure to refer to the "Check Sheet" for the latest cautions on development.
"Check Sheet" is seen at the following support page
"Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in
system development.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2002-2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2010.7
MB90480B/485B Series
(Continued)
• Instruction set optimized for controller applications
Supported data types (bit, byte, word, or long word)
Typical addressing modes (23 types)
32-bit accumulator for enhanced high-precision calculation
Enhanced signed multiplication/division instruction and RETI instruction functions
• Instruction set designed for high-level programming language (C) and multi-task operations
System stack pointer adopted
Instruction set symmetry and barrel shift instructions
• Non-multiplex bus/multiplex bus compatible
• Enhanced execution speed
4-byte instruction queue
• Enhanced interrupt functions
8 levels setting with programmable priority, 8 external interrupts
• Data transfer function (μDMAC)
Up to 16 channels
• Embedded ROM
Flash versions : 192 Kbytes, 256 Kbytes, 384 Kbytes, MASK versions : 192 Kbytes, 256 Kbytes
• Embedded RAM
Flash versions : 4 Kbytes, 6 Kbytes, 10 Kbytes, 24 Kbytes, MASK versions : 10 Kbytes, 16 Kbytes
• General purpose ports
Up to 84 ports
(Includes 16 ports with input pull-up resistance settings, 16 ports with output open-drain settings)
• A/D converter
8-channel RC sequential comparison type (10-bit resolution, 3.68
μs
conversion time (at 25 MHz) )
• I
2
C interface (MB90485B series only) : 1channel, P76/P77 N-ch open drain pin (without P-ch)
Do not apply high voltage in excess of recommended operating ranges
to the N-ch open drain pin (with P-ch) in MB90V485B.
•
μPG
(MB90485B series only) : 1 channel
• UART : 1 channel
• Extended I/O serial interface (SIO) : 2 channels
• 8/16-bit PPG : 3 channels (with 8-bit
×
6 channel/16-bit
×
3 channel mode switching function)
• 8/16-bit up/down counter/timer: 1 channel (with 8-bit
×
2 channels/16-bit
×
1-channel mode switching function)
• PWC (MB90485B series only) : 3 channels (Capable of compare the inputs to two of the three)
• 3 V/5 V I/F pin (MB90485B series only)
P20 to P27, P30 to P37, P40 to P47, P70 to P77
• 16-bit reload timer : 1 channel
• 16-bit I/O timer : 2 channels input capture, 6 channels output compare, 1 channel free-run timer
• On chip dual clock generator system
• Low-power consumption mode
With stop mode, sleep mode, CPU intermittent operation mode, watch mode, timebase timer mode
• Packages : QFP 100/LQFP 100
• Process : CMOS technology
• Power supply voltage : 3 V, single power supply (some ports can be operated by 5 V power supply at MB90485B
series)
2
DS07-13722-11E
MB90480B/485B Series
■
PRODUCT LINEUP
•
MB90480B series
Part number
Item
Classification
ROM size
RAM size
MB90F481B
MB90F482B
MB90V480B
CPU function
Ports
UART
8/16-bit PPG
8/16-bit up/down
counter/timer
16-bit
free-run timer
Output compare
16-bit
I/O timers (OCU)
Input capture
(ICU)
DTP/external interrupt circuit
Extended I/O serial interface
Timebase timer
A/D converter
Watchdog timer
Low-power consumption
(standby) modes
Process
Type
Emulator power supply*
2
Flash memory product
Evaluation product
192 Kbytes
256 Kbytes
⎯
4 Kbytes
6 Kbytes
16 Kbytes
Number of instructions : 351
Instruction bit length
: 8-bit, 16-bit
Instruction length
: 1 byte to 7 bytes
Data bit length
: 1-bit, 8-bit, 16-bit
Minimum instruction execution time : 40 ns (25 MHz machine clock)
General-purpose I/O ports: up to 84
General-purpose I/O ports (CMOS output)
General-purpose I/O ports (with pull-up resistance)
General-purpose I/O ports (N-ch open drain output)
1 channel, start-stop synchronized
8-bit
×
6 channels/16-bit
×
3 channels
Event input pins : 6, 8-bit up/down counters : 2
8-bit reload/compare registers : 2
Number of channels : 1
Overflow interrupt
Number of channels : 6
Pin input factor : A match signal of compare register
Number of channels : 2
Rewriting a register value upon a pin input (rising, falling, or both edges)
Number of external interrupt pin channels : 8 (edge or level detection)
Embedded 2 channels
18-bit counter
Interrupt cycles: 1.0 ms, 4.1 ms, 16.4 ms, 131.1 ms (at 4 MHz base oscillator)
Conversion resolution : 8/10-bit, switchable
One-shot conversion mode (converts selected channel 1 time only)
Scan conversion mode (conversion of multiple consecutive channels,
programmable up to 8 channels)
Continuous conversion mode (repeated conversion of selected channels)
Stop conversion mode (conversion of selected channels with repeated pause)
Reset generation interval : 3.58 ms, 14.33 ms, 57.23 ms, 458.75 ms
(minimum value, at 4 MHz base oscillator)
Stop mode, sleep mode, CPU intermittent operation mode, watch mode,
timebase timer mode
CMOS
User pin*
1
,
Not included security function
3 V/5 V versions
⎯
Included
*1 : User pin : P20 to P27, P30 to P37, P40 to P47, P70 to P77
*2 : It is setting of Jumper switch (TOOL VCC) when emulator (MB2147-01) is used.
Please refer to the MB2147-01 or MB2147-20 hardware manual (3.3 Emulator-dedicated Power Supply
switching) about details.
Note : Ensure that you must write to Flash at V
CC
=
3.13 V to 3.60 V (3.3 V
+
10%,
−5%)
.
DS07-13722-11E
3
MB90480B/485B Series
•
MB90485B series
Part number
Item
Classification
ROM size
RAM size
MB90487B
MB90488B MB90F488B MB90V485B MB90F489B
Flash
memory
product
256 Kbytes
10 Kbytes
Evaluation
product
⎯
16 Kbytes
Flash
memory
product
384 Kbytes
24 Kbytes
MB90483C
MASK ROM
product
256 Kbytes
16 Kbytes
MASK ROM product
192 Kbytes
10 Kbytes
256 Kbytes
10 Kbytes
CPU function
Number of instructions : 351
Instruction bit length
: 8-bit, 16-bit
Instruction length
: 1 byte to 7 bytes
Data bit length
: 1-bit, 8-bit, 16-bit
Minimum instruction execution time : 40 ns (25 MHz machine clock)
General-purpose I/O ports : up to 84
General-purpose I/O ports (CMOS output)
General-purpose I/O ports (with pull-up resistance)
General-purpose I/O ports (N-ch open drain output)
1 channel, start-stop synchronized
8-bit
×
6 channels/16-bit
×
3 channels
Event input pins : 6, 8-bit up/down counters : 2
8-bit reload/compare registers : 2
Number of channels : 1
Overflow interrupt
Number of channels : 6
Pin input factor: A match signal of compare register
Number of channels : 2
Rewriting a register value upon a pin input (rising, falling, or both edges)
Number of external interrupt pin channels: 8 (edge or level detection)
Embedded 2 channels
1 channel
1 channel
3 channels
18-bit counter
Interrupt cycles : 1.0 ms, 4.1 ms, 16.4 ms, 131.1 ms (at 4 MHz base oscillator)
Conversion resolution : 8/10-bit, switchable
One-shot conversion mode (converts selected channel 1 time only)
Scan conversion mode (conversion of multiple consecutive channels,
programmable up to 8 channels)
Continuous conversion mode (repeated conversion of selected channels)
Stop conversion mode (conversion of selected channels with repeated pause)
(Continued)
Ports
UART
8/16-bit PPG
8/16-bit up/down
counter/timer
16-bit
free-run timer
16-bit
I/O
timers
Output
compare
(OCU)
Input capture
(ICU)
DTP/external interrupt
circuit
Extended I/O serial
interface
I
2
C interface*
2
μPG
PWC
Timebase timer
A/D converter
4
DS07-13722-11E
Analog electronics
京公网安备 11010802033920号
EEWORLD
