TECHNICAL
MANUAL
LSIFC919
Single Channel
Fibre Channel
I/O Processor
Revision 2.1
October 2002
®
DB14-000151-02
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product.
LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this
equipment or the substitution or attachment of connecting cables and equipment other than those specified by
LSI Logic. The correction of interferences caused by such unauthorized modification, substitution, or attachment will
be the responsibility of the user.
The LSI Logic LSIFC919 is tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the instruction manual.
LSI Logic Corporation
North American Headquarters
Milpitas, CA
408.433.8000
ii
Revision 2.1
Copyright © 2000, 2001, 2002 by LSI Logic Corporation. All rights reserved.
LSI Logic products are not intended for use in life-support appliances, devices,
or systems. Use of any LSI Logic product in such applications without written
consent of the appropriate LSI Logic officer is prohibited.
DB14-000151-02, Third Edition (October 2002)
This document describes LSI Logic Corporation’s LSIFC919 Single Channel
Fibre Channel I/O Processor and will remain the official reference source for all
revisions/releases of this product until rescinded by an update.
LSI Logic Corporation reserves the right to make changes to any products herein
at any time without notice. LSI Logic does not assume any responsibility or
liability arising out of the application or use of any product described herein,
except as expressly agreed to in writing by LSI Logic; nor does the purchase or
use of a product from LSI Logic convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of
LSI Logic or third parties.
Copyright © 2000, 2001, 2002 by LSI Logic Corporation. All rights reserved.
TRADEMARK ACKNOWLEDGMENT
LSI Logic, the LSI Logic logo design, Fusion-MPT, and GigaBlaze are trademarks
or registered trademarks of LSI Logic Corporation. ARM is a registered
trademark of ARM Ltd., used under license. All other brand and product names
may be trademarks of their respective companies.
DB
To receive product literature, visit us at http://www.lsilogic.com.
For a current list of our distributors, sales offices, and design resource
centers, view our web page located at
http://www.lsilogic.com/contacts/na_salesoffices.html
iii
Revision 2.1
Copyright © 2000, 2001, 2002 by LSI Logic Corporation. All rights reserved.
iv
Revision 2.1
Copyright © 2000, 2001, 2002 by LSI Logic Corporation. All rights reserved.
Preface
This book is the primary reference and technical manual for the
LSIFC919 Fibre Channel I/O Processor. It contains a complete functional
description for the LSIFC919 and includes complete physical and
electrical specifications for the product.
Audience
This document was prepared for logic designers and applications
engineers and is intended to provide an overview of the LSI Logic
LSIFC919 and to explain how to use the LSIFC919 in the initial stages
of system design.
This document assumes that you have some familiarity with
microprocessors and related support devices. The people who benefit
from this book are:
•
•
Organization
Engineers and managers who are evaluating the LSIFC919 for
possible use in a system
Engineers who are designing the LSIFC919 into a system
This document has the following chapters and appendixes:
•
•
Chapter 1,
Introduction,
provides a general description of the
LSIFC919.
Chapter 2,
Fibre Channel Overview,
briefly describes some key
elements of Fibre Channel, including Layers, Topologies, and
Classes of Service.
LSIFC919 Single Channel Fibre Channel I/O Processor
Revision 2.1
Copyright © 2000, 2001, 2002 by LSI Logic Corporation. All rights reserved.
v
京公网安备 11010802033920号
EEWORLD
