PREPARED BY :
DATE
SPEC No. LD-14115
FILE No.
ISSUE : Feb.25.2002
APPROVED BY :
DATE
TFT LCD DEVELOPMENT GROUP
SHARP CORPORATION
PAGE
: 24 pages
APPLICABLE GROUP
TFT Liquid Crystal Display
SPECIFICATION
Group
DEVICE SPECIFICATION
TFT-LCD Module
MODEL No.
LQ201U1LW01
□
CUSTOMER'S APPROVAL
DATE
BY
PRESENTED
BY
M.TAKEDA
Department General Manager
Development Engineering Department 2
AVC Liquid Crystal Display Division
AVC Liquid Crystal Display Group
SHARP Corporation
LD-14115-1
1. Application
This specification applies to the color 20.1 UXGA TFT-LCD module LQ201U1LW01.
◎These
specification sheets are the proprietary product of SHARP CORPORATION(”SHARP) and include
materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in
any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express
written permission of SHARP.
◎The
device listed in these specification sheets was designed and manufactured for use in OA equipment.
◎In
case of using the device for applications such as control and safety equipment for transportation(aircraft,
trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require
higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and
redundant system design should be taken.
◎In
case of using the device for equipment that requires an extreme level of reliability, such as aerospace
applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or
other equipment for life support, contact and consult with a SHARP sales representative.
◎SHARP
assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in these specification sheets.
◎Contact
and consult with a SHARP sales representative for any questions about this device.
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit.
Graphics and texts can be displayed on a 1600×3×1200 dots panel with about 16 million colors by supplying 48
bit data signals(8bit×2pixel×RGB) , two display enable signals, two dot clock signals, +12V DC supply
voltages for TFT-LCD panel driving and supply voltage for back light.
It is a wide viewing-angle-module (Vertical viewing angle:170°Horizontal viewing angle:170°,CR≧10).
LD-14115-2
3. Mechanical Specifications
Parameter
Display size
51 (Diagonal)
20.1 (Diagonal)
Active area
Pixel format
408.0 (H)×306.0 (V)
1600 (H)×1200 (V)
(1 pixel＝R＋G＋B dots)
Pixel pitch
Pixel configuration
Display mode
Unit outline dimensions *1
Mass
Surface treatment
0.255(H)×0.255 (V)
R,G,B vertical stripe
Normally black
436(W)×335 (H)×27.5 (D)
3.8 (MAX)
Anti-glare And hard-coating 2H
mm
kg
mm
Specifications
Unit
cm
Inch
mm
Pixel
*1.Note: excluding back light cables.
The thickness of module (D) doesn’t contain the projection.
Outline dimensions are shown in Fig.1.
京公网安备 11010802033920号
EEWORLD
