Superior Jitter Performance (comparable to SAW based)
Frequencies from 150 MHz to 1.4 GHz
Designed for a short 2 week cycle time
Applications:
Telecommunications such as SONET / SDH / DWDM /
FEC / SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic flight controls and military communications
MtronPTI
Corporate Headquarters
100 Douglas Avenue
PO Box 630
Yankton, SD 57078-0630
1-800-762-8800
www.mtronpti.com
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Product Specifications
Product Features:
•
•
•
•
•
Superior
Jitter Performance
comparable to SAW-based products (0.30pS typical at 622.08 MHz)
Frequencies
from 150 MHz to 1.4 GHz
Crystal resonator based product offering
far better Stability
than SAW (+/-20ppm)
Designed for
Short Cycle Time
manufacturing (2 weeks or less)
0.01 µF bypass capacitor from Vcc to ground built into
both
5x7 and 9x14 packages
Description:
The M210x Series oscillators are high performance PECL, LVDS, or CML output oscillators featuring exceptional
performance while addressing the demands for shortened manufacturing cycle times.
Applications:
•
•
•
•
Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic flight controls and military communications
Test Equipment and Instrumentation
Ordering Information:
Part Number Example:
M210
0
6
8
B
P
N
622.080000MHz
Part Number Example: M210068BPN – 622.080000 MHz
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
1
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Applications Note:
The MtronPTI M210x series of clock oscillators, featuring
QiK Chip
TM
technology, provides for extremely low jitter of 0.30 ps RMS.
For applications requiring low jitter, frequencies from 150 MHz to 1.4 GHz are available. LVPECL, LVDS, or CML compatible
outputs, as well as operating voltage of 1.8 V, 2.5 V, and 3.3 V are also options on the M210x.
The M210x is available at a stability of ± 20 ppm, all-inclusive, over the industrial operating temperature range of -40°C to +85°C.
By providing this specification, the M210x will perform at a much superior level than SAW based oscillator designs (Figure 1). This
level of performance is achieved by utilizing a precision AT-cut crystal. An enable/disable function is also an available option on
the M210x. The internal 0.01 µF by-pass capacitor also assures optimum noise suppression on the supply voltage pad.
The superior integrated jitter performance of 0.3 pS RMS makes the M210x suitable for 10 Gig-E, broadband networks, network
switches, SONET, SDH, SERDES, DWDM, FEC, WLAN, and OC-3 thru OC-192 systems. The M210x is available in a nine-pad,
5x7x1.9 mm, leadless, ceramic, surface mount package (see page 4) that is RoHS and 260°C reflow compatible. (No PCB traces
should be located directly under the 5x7 product). A six-J-lead, 9x14 mm, ceramic, surface mount package, that is RoHS and
260°C reflow compatible, is also available (see page 4). Figures 2 and 3 below show load termination conditions for LVPECL and
LVDS. The M210x oscillators offer a pin 1 tristate for backward compatibility to many of the existing products in the industry from
Vectron, Epson, and others.
For superior performance in a high frequency clock oscillator, the M210x is a logical choice for designers. The unique design
architecture allows the M210x fast turn around on engineering design samples, as well as production quantities in 2 weeks or less.
Figure 1. Frequency/Temperature Curves, M210x vs. SAW Based Oscillator Devices
Figure 2. 3.3V LVPECL Load Circuit
Figure 3. LVDS Load Circuit
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
2
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Performance Characteristics:
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
3
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Product Dimensions & Pinout Information:
5x7 mm (N) Package
9x14 mm (J) Package
Handling Information:
Although protection circuitry has been designed into the M210x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-wide
standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω
, capacitance = 100 pF) is widely used
and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using
these circuit parameters.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
Refer to the code of Zhengdian Atom, use STM32F103 to drive OV2640 to output JPEG pictures, and want to display the pictures on the computer through the serial port. The problem now is that I can rece...
I would like to ask the experts. For example, PIC16F886 has CONFIG1 and CONFIG2. How do I configure it? I can't compile it like this: __CONFIG1 (FOSC_HS & WDTE_OFF & LVP_OFF & PWRTE_ON & BOR4V_BOR40V ...
[i=s]This post was last edited by tianshuihu on 2014-12-24 18:57[/i] About a month ago, I received an email from Ti saying, "The sample application rules have changed. If you don't use a school or com...
[align=left][font=宋体][size=10.5pt][font=宋体]Product features: The measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity; there are no obstructing fl...
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
With the rapid development of urban economy, elevators are increasingly used as a vertical transportation tool. However, elevator fault detection and maintenance, especially the role of elevator remot...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
LED is the abbreviation of light emitting diode, which is an electric light source made of semiconductor technology. The core part of LED is a chip composed of P-type semiconductor and N-type semi...[Details]
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
It is well known to automotive suppliers that automakers are demanding more from their supply base. For connector suppliers, this means stricter requirements for product performance, stability and ...[Details]
The era of mobile access to the Internet has arrived, and it will rapidly change the business and infrastructure needs of mobile operators under a whole new trend of requirements. We need 4G LTE to...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
