-
As the whole equipment is becoming increasingly miniaturized and power-saving, low-dropout linear regulators (LDOs) with low power consumption are becoming the mainstream in the market for linear regu...[Details]
-
With the continuous emergence of new technologies and the increasing complexity of DSP real-time systems, there are more and more different types of external devices. Writing drivers for these exte...[Details]
-
According to In-Stat/MDR, the number of mobile phones with Bluetooth capabilities will reach at least 300 million by 2005. One of the clear evidences of the increasing adoption of Bluetooth is that...[Details]
-
Abstract: CC2420 is a 2.4GHz RF chip introduced by Chipcon that complies with the IEEE 802.15.4 specification. It is used to develop ZigBee devices and products for PAN networks such as industrial ...[Details]
-
Novaled, a German company, has successfully developed p-type and n-type field effect transistors based on a single-layer pentacene semiconductor layer by using its own p-type and n-type dopants. This ...[Details]
-
Preface
In the application of PLL, DLL and CDR circuits, people generally require the output clock signal to have a 50% duty cycle so that data can be sampled at both the rising and fallin...[Details]
-
PSoC is a programmable system-on-chip produced by Cypress Semiconductor with an 8-bit MCU core and a digital and analog mixed signal array. PSoC integrates three programmable capabilities into one....[Details]
-
In the new generation of automotive exterior mirrors, the number of built-in functions has increased significantly: side retro-reflectors or turn signals/flashlights, door exterior lights, defroste...[Details]
-
0 Introduction
The pipeline detector is a special portable instrument that uses the secondary field principle to detect underground metal pipelines. It generally includes a transmitter and...[Details]
-
0 Introduction
IIR filters are not easy to make into linear phase, but FIR filters can be made into linear phase as long as certain conditions are met. The requirement for linear phase is ...[Details]
-
In embedded control systems, it is often necessary to collect data and process real-time physical quantities on site, and the system is required to have good human-computer interaction functions. A...[Details]
-
Differential circuits can effectively remove common-mode noise in high-frequency and high-speed designs. Differential devices and transmission lines are not only commonly used in high-speed digital...[Details]
-
0 Introduction
In recent years, with the continuous reduction of electronic component prices and the continuous improvement of digital signal processor (DSP) performance, embedded real-tim...[Details]
-
There is no doubt that high-brightness LEDs will become a major feature of the next generation of cars. This is because LEDs have many important advantages over traditional incandescent lighting so...[Details]
-
Electrical Characterization at the Nanoscale
Studying the electrical properties of nanoscale materials typically involves using a combination of probing and microscopy techniques to make d...[Details]