ATA5756-6DQY datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Wireless rf/communication> Telecom circuit> ATA5756-6DQY

ATA5756-6DQY: DescriptionUHF ASK/FSK Transmitter; CategoryWireless rf/communication Telecom circuit; File Size261KB，20 Pages; ManufacturerAtmel (Microchip); Environmental Compliance

Download Datasheet Parametric Compare View All

ATA5756-6DQY Overview

UHF ASK/FSK Transmitter

ATA5756-6DQY Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	Atmel (Microchip)
Parts packaging code	TSSOP
package instruction	TSSOP, TSSOP10,.19,20
Contacts	10
Reach Compliance Code	compliant
JESD-30 code	S-PDSO-G10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	125 °C
Minimum operating temperature	-40 °C
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Encapsulate equivalent code	TSSOP10,.19,20
Package shape	SQUARE
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
power supply	3 V
Certification status	Not Qualified
Maximum seat height	1.1 mm
Maximum slew rate	0.0102 mA
Nominal supply voltage	3 V
surface mount	YES
technology	BIPOLAR
Telecom integrated circuit types	TELECOM CIRCUIT
Temperature level	AUTOMOTIVE
Terminal surface	Matte Tin (Sn) - annealed
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
width	3 mm
Base Number Matches	1

Preview

Download Datasheet

View All

Features

•

PLL Transmitter IC with Single-ended Output

•

High Output Power (6 dBm) at 8.1 mA (315 MHz) and 8.5 mA (433 MHz) Typical Values

•

Divide by 24 (ATA5756) and 32 (ATA5757) Blocks for 13 MHz Crystal Frequencies and

•

for Low XTO Start-up Times

Modulation Scheme ASK/FSK with Internal FSK Switch

Up to 20 kBaud Manchester Coding, Up to 40 kBaud NRZ Coding

Power-down Idle and Power-up Modes to Adjust Corresponding Current Consumption

through ASK/FSK/Enable Input Pins

ENABLE Input for Parallel Usage of Controlling Pins in a 3-wire Bus System

CLK Output Switches ON if the Crystal Current Amplitude has Reached 35% to 80% of

its Final Value

Crystal Oscillator Time Until CLK Output is Activated, Typically 0.6 ms

Supply Voltage 2.0 V to 3.6 V in Operation Temperature Range of -40°C to +125°C

ESD Protection at all Pins (4 kV HBM)

Small Package TSSOP10

UHF ASK/FSK

Transmitter

ATA5756

ATA5757

Benefits

•

Low Parasitic FSK Switch Integrated

•

Very Short and Reproducible Time to Transmit Typically < 0.85 ms

•

13.125 MHz/13.56 MHz Crystals Give Opportunity for Small Package Sizes

1. Description

The ATA5756/ATA5757 is a PLL transmitter IC which has been developed for the

demands of RF low-cost transmission systems at data rates up to 20 kBaud Man-

chester coding and 40 kBaud NRZ coding. The transmitting frequency range is

313 MHz to 317 MHz (ATA5756) and 432 MHz to 448 MHz (ATA5757), respectively.

It can be used in both FSK and ASK systems. Due to its shorten crystal oscillator set-

tling time it is well suited for Tire Pressure Monitoring (TPM) and for Passive Entry Go

applications.

Figure 1-1.

System Block Diagram

UHF ASK/FSK

TPM and Remote control

transmitter

UHF ASK/FSK

Remote control receiver

1 Li cell

ATA5756/

ATA5757

PLL

Antenna Antenna

XTO

VCO

Keys

Encoder

ATARx9x

U3741B/

U3745B/

T5743/

T5744/

Demod.

Control

1...3

µC

IF Amp

PLL

XTO

Power

amp.

LNA

VCO

4702J–RKE–09/08

ATA5756/ATA5757

The power amplifier is an open-collector output delivering a current pulse which is nearly inde-

pendent from the load impedance and can therefore be controlled via the connected load

impedance.

This output configuration enables a simple matching to any kind of antenna or to 50

Ω.

A high

power efficiency for the power amplifier results if an optimized load impedance of

Load, opt

= 380

+ j340

(ATA5756) at 315 MHz and Z

Load, opt

= 280

+ j310

(ATA5757) at

433.92 MHz is used at the 3-V supply voltage.

4. Functional Description

If ASK = Low, FSK = Low and ENABLE = open or Low, the circuit is in power-down mode con-

suming only a very small amount of current so that a lithium cell used as power supply can work

for many years.

If the ENABLE pin is left open, ENABLE is the logical OR operation of the ASK and FSK input

pins. This means, the IC can be switched on by either the FSK of the ASK input.

If the ENABLE pin is Low and ASK or FSK are High, the IC is in idle mode where the PLL, XTO

and power amplifier are off and the microcontroller ports controlling the ASK and FSK inputs can

be used to control other devices. This can help to save ports on the microcontroller in systems

where other devices with 3-wire interface are used.

With FSK = High and ASK = Low and ENABLE = open or High, the PLL and the XTO are

switched on and the power amplifier is off. When the amplitude of the current through the crystal

has reached 35% to 80% of its final amplitude, the CLK driver is automatically activated. The

CLK output stays Low until the CLK driver has been activated. The driver is activated synchro-

nously with the CLK output frequency, hence, the first pulse on the CLK output is a complete

period. The PLL is then locked within <250 µs after the CLK driver has been activated, and the

transmitter is then ready for data transmission.

With ASK = High the power amplifier is switched on. This is used to perform the ASK modula-

tion. During ASK modulation the IC is enabled with the FSK or the ENABLE pin.

With FSK = Low the switch at pin XTO2 is closed, with FSK = High the switch is open. To

achieve a faster start-up of the crystal oscillator, the FSK pin should be High during start-up of

the XTO because the series resistance of the resonator seen from pin XTO1 is lower if the

switch is off.

The different modes of the ATA5756/ATA5757 are listed in

Table 4-1,

the corresponding current

consumption values can be found in the table

“Electrical Characteristics” on page 15.

Table 4-1.

ASK Pin

Low

High

Low/High

High

ATA5756/ATA5757 Modes

FSK Pin

Low

High

Low

High

Low/High

ENABLE Pin

Low/open

High

High/open

Low

Mode

Power-down mode, FSK switch High Z

Power-up, PA off, FSK switch Low Z

Power-up, PA off, FSK switch High Z

Power-up, PA on, FSK switch Low Z

Power-up, PA on, FSK switch High Z

Idle mode, FSK switch High Z

4702J–RKE–09/08

ATA5756-6DQY Related Products

	ATA5756-6DQY	ATA5756-6DPY	ATA5757-6DQY	ATA5756_08
Description	UHF ASK/FSK Transmitter	UHF ASK/FSK Transmitter	UHF ASK/FSK Transmitter	UHF ASK/FSK Transmitter
Is it Rohs certified?	conform to	conform to	conform to	-
Maker	Atmel (Microchip)	Atmel (Microchip)	Atmel (Microchip)	-
Parts packaging code	TSSOP	TSSOP	TSSOP	-
package instruction	TSSOP, TSSOP10,.19,20	TSSOP, TSSOP10,.19,20	TSSOP, TSSOP10,.19,20	-
Contacts	10	10	10	-
Reach Compliance Code	compliant	compliant	unknow	-
JESD-30 code	S-PDSO-G10	S-PDSO-G10	S-PDSO-G10	-
length	3 mm	3 mm	3 mm	-
Number of functions	1	1	1	-
Number of terminals	10	10	10	-
Maximum operating temperature	125 °C	125 °C	125 °C	-
Minimum operating temperature	-40 °C	-40 °C	-40 °C	-
Package body material	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	-
encapsulated code	TSSOP	TSSOP	TSSOP	-
Encapsulate equivalent code	TSSOP10,.19,20	TSSOP10,.19,20	TSSOP10,.19,20	-
Package shape	SQUARE	SQUARE	SQUARE	-
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	-
power supply	3 V	2.5/3.3 V	2.5/3.3 V	-
Certification status	Not Qualified	Not Qualified	Not Qualified	-
Maximum seat height	1.1 mm	1.1 mm	1.1 mm	-
Maximum slew rate	0.0102 mA	0.0046 mA	0.011 mA	-
Nominal supply voltage	3 V	3 V	3 V	-
surface mount	YES	YES	YES	-
technology	BIPOLAR	BIPOLAR	BIPOLAR	-
Telecom integrated circuit types	TELECOM CIRCUIT	TELECOM CIRCUIT	TELECOM CIRCUIT	-
Temperature level	AUTOMOTIVE	AUTOMOTIVE	AUTOMOTIVE	-
Terminal form	GULL WING	GULL WING	GULL WING	-
Terminal pitch	0.5 mm	0.5 mm	0.5 mm	-
Terminal location	DUAL	DUAL	DUAL	-
width	3 mm	3 mm	3 mm	-

Recommended Resources

High voltage linear regulator HIP5600 circuit

555 water level monitor

M62213FP application example circuit diagram

Flowmeter signal conversion circuit

Non-stop lamp circuit

High precision linear amplifier circuit

WINCE6.0 interrupt processing OEMInterruptHandler--KernelIoControl(IOCTL_HAL_REQUEST_SYSINTR,...): I've been looking at WINCE interrupt handling recently, and there's one thing I'm not clear on, so I hope we can discuss it: Question 1: When a physical interrupt occurs, is OEMInterruptHandler the fi...; lzj000008 Embedded System

FPGA Design Process: FPGA Design Process...; zxopenljx FPGA/CPLD

Problems with using USB HUB in WINCE: 2440 development board, WINCE5.0 system, after starting the system, inserting a USB flash drive, USB HUB or mouse can be recognized normally. When the USB flash drive or USB HUB is inserted first and ...; freejames Embedded System

What is the function of this amplifier?: As shown in the picture, what is the function of this amplifier? The result I calculated based on the principle of virtual short and virtual open is very confusing? Also, why does AD have positive and...; iiijjj0323 Analog electronics

Power supply obstacles + power supply SBC selection and pitfalls: Hello everyone, I am an automotive electronics hardware engineer. When selecting a power SBC, you should pay attention to the battery voltage range and then combine it with the test standards to selec...; 你好再见 Power technology

ADS1.2 calls strtoul(str,NULL,0,NULL), the content of address 0 will be changed: The definition of strtoul is: unsigned long strtoul(const char *str, char **endptr, int requestedbase, int *ret) It can be seen that ADS1.2 will point the NULL pointer to address 0, but address 0 is w...; nsz Embedded System

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components