TC1303C-EM2EMFTR datasheet, PDF

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303C-EM2EMFTR

TC1303C-EM2EMFTR: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, 3 X 3 MM, 0.9 MM HEIGHT, PLASTIC, DFN-10; CategoryPower/power management The power supply circuit; File Size757KB，38 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303C-EM2EMFTR Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, 3 X 3 MM, 0.9 MM HEIGHT, PLASTIC, DFN-10

TC1303C-EM2EMFTR Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Parts packaging code	DFN
package instruction	HVSON,
Contacts	10
Reach Compliance Code	compliant
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-N10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	HVSON
Package shape	SQUARE
Package form	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	NO LEAD
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm
Base Number Matches	1

Preview

Download Datasheet

View All

TC1303A/TC1303B/

TC1303C/TC1304

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typical

• Independent Shutdown for Buck and LDO

Outputs (TC1303)

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed-Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard

Fixed-Output Voltages (0.8V, 1.2V, 1.5V,

1.8V, 2.5V, 3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typical @

200 mA

- Standard Fixed-Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors Buck Output Function (TC1303A)

- Monitors LDO Output Function (TC1303B)

- Monitors Both Buck and LDO Output

Functions (TC1303C

and TC1304)

- 300 ms Delay Used for Processor Reset

• Sequenced Startup and Shutdown (TC1304)

• Small 10-pin 3x3 DFN or MSOP Package Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The

TC1303/TC1304

combines

500 mA

synchronous buck regulator and 300 mA Low-Dropout

Regulator (LDO) with a power-good monitor to provide

a highly integrated solution for devices that require

multiple supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy,

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303/TC1304, the power-good output is

based on the regulation of the buck regulator output, the

LDO output or the combination of both. The TC1304

features start-up and shutdown output sequencing.

The TC1303/TC1304 is available in either the 10-pin

DFN or MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303/TC1304 standard

parts, consult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB-Powered Devices

Handheld Medical Instruments

Organizers and PDAs

2008 Microchip Technology Inc.

DS21949C-page 1

Recommended Resources

Digital/analog (A/D) converter output interface circuit diagram composed of uA741

Anti-theft capacitive sensitive alarm circuit diagram

Adaptive DC Regulator

Electronic sanitary cabinet circuit

DX-1393/BX-1408 (TV, VCR, audio equipment and air conditioner) infrared remote control receiving circuit

Motorcycle charger circuit diagram

How to catch error exceptions of MSComm control: As the title says, how to catch MSComm control error exceptions. I want to catch MSComm error exceptions and do some custom operations, but it seems that the general method of catching exceptions does...; icc007 Embedded System

Made a batch of UHF band low noise amplifiers: Recently, I made a UHF band low noise amplifier for the 400-430MHz band. It is also the main frequency band for amateur radio. Adding it to the front end of the receiver can improve the sensitivity of...; RF-刘海石 RF/Wirelessly

Does the MEGA16 reference power pin VREF have drive capability?: When the ADC turns on the internal 2.56V reference, the VREF pin has a 2.56V voltage. I don't know how much driving capability this pin has? Can it also provide a stable reference voltage source for t...; zhizi78 Microchip MCU

Beaglebone Black cannot use USB0 to transfer data after changing the kernel: [color=#666666]I used gnueabi-gcc to compile the dog board kernel on the PC, and generated the following image and dtb[/color] [color=#666666]This is the file under the dog board uboot (can be used fo...; buaa213 Linux and Android

What is the function of special pads (plum blossom pads, cross pads, teardrop pads, etc.)?: [p=26, 2, left][font=-apple-system-font,][b]1. Plum blossom soldering pad[/b][/font][/p][align=left][color=rgb(62, 62, 62)][font=-apple-system-font,][/font][/color][/align][p=26, 2, left][font=-apple-...; ohahaha PCB Design

Switching Power Supply-Principle, Design and Application Circuit: ...; wzt Power technology

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components