360W Single Output Battery Charger
Features :
PB-360
series
3 stage charging
AC 115/230VAC selected by switch
Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
Protection: Overload / Short circuit / Reverse polarity / Over voltage
/ Over temperature
Charger for lead-acid batteries
2 color LED loading indicator
Low cost, High reliability
FAN on/off control(Depends on charging current)
2 years warranty
(except for 48V)
(P type only)
PB
1.300W without FAN
2.360W with FAN
P:With Passive PFC
N:Without Passive PFC
300/360 P
12
12:14.4V
24:28.8V
48:57.6V
SPECIFICATION
MODEL
BOOST CHARGE VOLTAGE
FLOAT CHARGE VOLTAGE
OUTPUT
RECOMMENDED BATTERY
CAPACITY(AMP HOURS)
(Note 5)
BATTERY TYPE
OUTPUT CURRENT
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
POWER FACTOR (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
SHORT CIRCUIT
PROTECTION REVERSE POLARITY
OVER VOLTAGE
OVER TEMPERATURE
FUNCTION REMOTE CONTROL (CN5)
WORKING TEMP.
PB-360
14.4V
13.6V
-12
PB-360
28.8V
27.2V
26 ~ 28.8V
40 ~ 125Ah
-24
PB-360
57.6V
54.4V
52 ~ 58.6V
20 ~ 65Ah
-48
VOLTAGE ADJUSTABLE RANGE
13 ~ 14.7V
80 ~ 200Ah
Open & Sealed Lead Acid
24.3A
47 ~ 63Hz
85%
>0.65 (with P type) at 230VAC
7A/115VAC
3.5A/230VAC
COLD START 60A
<3.5mA / 240VAC
12.5A
248 ~ 370VDC
6.25A
90 ~ 132VAC / 180 ~ 264VAC selected by switch
86%
87%
90 ~ 110% rated output current
Protection type : Constant current limiting, recovers automatically after fault condition is removed
O/P Built in fuse (FS100) to protect short circuit condition, shut down o/p voltage and can not re-power on
By internal fuse
16 ~ 18V
31 ~ 35V
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Automatically derate charge current until zero
Open: Normal work
Short: Stop Charging
-20 ~ +60 (Refer to output load derating curve)
59 ~ 64V
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
-40 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05%/ (0 ~ 45
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
IEC60335-2-29 CB approved by TUV(except for 48V), UL60950-1 approved
SAFETY STANDARDS
SAFETY &
EMC
(Note 4)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
Compliance to EN61000-3-2,-3 (only P type)
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
115.8Khrs min.
MIL-HDBK-217F (25
)
253*135*48.5mm(L*W*H)
1.5Kg; 6pcs/10Kg/0.95CUFT
OTHERS
NOTE
MTBF
DIMENSION
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
File Name:PB-360-SPEC 2008-11-11
Sensor
京公网安备 11010802033920号
EEWORLD
