Tsi574
™
4/8 SERIAL RAPIDIO SWITCH
Features
Serial RapdIO Interfaces
• 40
Gbits/s Full-Duplex Serial RapidIO Switch
• Open Standard Compliant
–
RapidIO Interconnect Specification
(Revision 1.3)
– IEEE 1149.6 AC-JTAG
Configurable
The Tundra Semiconductor Corporation (Tundra) Tsi574
TM
is a third
generation RapidIO switch supporting 40 Gbits/s aggregate bandwidth. The
Tsi574 is part of a family of switches that enable customers to develop
systems with robust features and high performance at low cost.
The Tsi574 provides designers and architects with maximum scalability to
design the device into a wide range of applications. Flexible port
configurations can be selected through multiple port width and frequency
options.
Building on the industry leading Tsi564A
TM
4/8 Port Serial RapidIO Switch,
the Tsi574 contains all the benefits of its predecessor plus enhances the
fabric switching capabilities through the addition of multicast, traffic
management through scheduling algorithms, programmable buffer depth,
and fabric performance monitoring to supervise and manage traffic flow.
Block Diagram
• Up to four 4x links
• Up to eight 1x links
• Each 4x link can be separated into two,
1x links
• Supports 1.25, 2.5 and 3.125 Gbaud
rates
• Hot Swap
– Live insertion and extraction of field
replaceable units
2
• I C Master/Slave
• Multicast event control symbol
• Lane swap
The Tsi574 enhances system scalability
through device configuration and provides
architects and designers with a solution for
both throughput intensive and power
sensitive applications.
Performance
Multicast
Engine
Up to 2 Serial RapidIO Ports - 1x/4x Mode
or
Up to 4 Serial RapidIO Ports - 1x Mode
SP1
(1x only)
SP3
(1x only)
SP4
(4x or 1x)
Enhanced Internal
Switching Fabric
SP6
(4x or 1x)
SP5
(1x only)
SP7
(1x only)
• Low latency through packet cut-
through
• Full duplex, line rate termination, non-
blocking fabric
• Prevention of head-of-line blocking
• Error management extensions
• Multicast
• Performance monitoring and statistic
registers
• Programmable buffer management
• Additional scheduling algorithms
Low Power
Registers
I2C
JTAG
80B803B_BK001_02
Master and
Slave Devices
IEEE1149.6 Boundary Scan
•
•
•
•
Programmable SerDes
Configurable on port width and speed
Configurable port power down
Further power savings from Tsi564A
Embedded applications further benefit from the ability to route packets to
multiple endpoints through hierarchical lookup tables, independent unicast
and multicast routing mechanisms, and error management extensions that
provide proactive issue notification to the fabric controller. In addition, the
Tsi574 supports both in-band serial RapidIO access and out-of-band access
to the full fabric register set through the I
2
C interface.
Cost
• Integrated SerDes
• Small, 399 FCBGA, 21mm package
Up to 2 Serial RapidIO Ports - 1x/4x Mode
or
Up to 4 Serial RapidIO Ports - 1x Mode
SP0
(4x or 1x)
SP2
(4x or 1x)
Tsi574
4/8 SERIAL RAPIDIO SWITCH
Benefits
• Scalability: Single solution for mesh,
fabric, and aggregated systems
• Performance: Improved system and
distributed processing performance
• Power: SerDes implementation for low
power solution
Typical Applications
The Tsi574 can be used in many embedded communication applications. It
provides chip-to-chip interconnect between I/O devices and can replace
existing proprietary backplane fabrics for board-to-board interconnect which
improves system cost and product time-to-market.
Processor Farm Mezzanine Diagram
Specifications
•
•
•
•
Technology: 0.13um
Voltage: 1.2V and 3.3V
Low power consumption
Package: 399 ball, 21mm x 21mm,
1mm ball pitch FCBGA
• Rated for commercial and industrial
temperatures
• Forward compatible with the Tsi564A
Serial RapidIO Switch allowing easy
migration for existing systems.
DSP
Tsi574
Dual
Serial
RapidIO
DSP
Target Markets
Wireless Infrastructure
• Node B, Radio Network Controller,
Media Gateway
Communications Wireline Infrastructure
• Multiservice WAN Switches, 1 to 10
Gbit Ethernet Switches, 1 to >10Gbit
Routers, DSLAMs
Storage
• Storage Area Networks, Network
Attached Storage, High-Performance
Work Stations, Multi-service Access
Nodes, Carrier-grade VoIP
Video Infrastructure
• Broadcast, imaging, and encoding
• Architecture Standards
• ATCA, MicroTCA, VXS, VPX
AMC Slot
AMC Slot
AMC Slot
80B803B_TA001_01
The Tsi574 provides traffic aggregation through packet prioritization when it
is used with RapidIO-enabled I/O devices. When it is in a system with multiple
RapidIO-enabled processors it provides high performance peer-to-peer
communication through its non-blocking switch fabric.
Switch Carrier Blade Diagram
AMC Slot
Tsi574
Tsi574
80B803B_TA002_01
Serial RapidIO Mesh
Tundra Semiconductor Corporation
603 March Road, Ottawa,
Ontario, Canada, K2K 2M5
Phone: 613-592-0714 Toll-free: 800-267-7231
Fax: 613-592-1320 Email: info@tundra.com
Document: 80B803B_FB001_03
©2006 Tundra Semiconductor Corporation
All trademarks are property of their respective
owners. Information is subject to change
without notice.
京公网安备 11010802033920号
EEWORLD
