OXPCIe200, PCI Express multi-port bridge
Highlights
General Features
o
Dual USB 2.0 host ports or USB 2.0 host port &
SPI/SRAM port, both with UART port configuration
o
PCIe x1 end-point
-
Integrated 2.5 GT/s SerDes
o
9 x 9mm
2
, 156-pin TAPP package
o
Typical Power: 300 mWatts
Part of the
Expresso
family of high performance PCI
Express devices, the OXPCIe200 is a single chip
multi-port bridge with a rich set of connectivity ports
and advanced system management to maximize data
throughput while substantially reducing CPU and
system loading.
A fully integrated, single lane PCI Express endpoint
controller and SerDes enables host system access to
USB2.0 host, SPI and SRAM ports, a PLX
Technology’s ultra high performance Oxford 950
UART, plus user defined GPIOs/PWMs. The device
is configurable as dual USB host ports or one USB2.0
host port & one SPI or SRAM port providing a high
throughput communication path from a PCI Express
host system to a slave processor or peripherals.
Complete with the Oxide development tools and
certified device drivers, the OXPCIe200 is easy to
design-in and the ideal connectivity solution for a
diverse range of products including: inter-processor
communication, device control, I/O expansion and
multi-modem ExpressCard modules.
Accelerate your product development and time to
market with Oxide and PLX Technology’s easy to
design-in, high performance serial connectivity
solutions that just work.
Key Features
o
Standards Compliant
-
PCI Express Base Specification, r1.1 (backwards
compatible with PCIe r1.0a)
-
PCI Power Management Spec, r1.2
-
ExpressCard, Mini Card & AIC compatible
-
MSI/MSI-X compatible
-
ASPM (L0S, L1) Link power management
o
High Performance
-
EHCI/OHCI compliant USB 2.0 ports
-
Integrated USB2.0 full speed Phy
-
Master or slave mode SPI or SRAM port
-
Data rates of 60Mbps (SPI) & 25MB/s (SRAM)
-
8KB slave memory with direct access or 16 channel
FIFO modes
-
PLX’s Oxford 950 UART
-
DMA/bus mastering of both UARTs
-
Asynchronous baud rates up to 15 Mbps
-
128-byte deep transmit/receive FIFO
-
9, 8, 7, 6 & 5-bit data framing
-
Automated in & out-of-band flow control
-
Advanced FIFO fill management
o
Flexibility
-
RS232, RS422, RS485 and IrDA operation
-
Flexible clock pre-scaler from 1 to 31.875
-
Programmable RS485 Turn-around delay
-
450 through 950 software compatibility
-
8 user-configurable GPIOs/PWMs
-
Device parameters configurable via EEPROM
-
1.8V, 2.5V or 3.3V UART & GPIO I/O voltage
o
Robust Operation
-
Operation from a single 3.3 V supply
-
Industrial temperature range -40°C to 85°C
o
Broad Device Driver Support
-
Windows 7/Vista/XP/2K
-
WinCE 4.2/5.0/6.0
-
Linux 2.4/2.6
© PLX Technology, www.plxtech.com
Page 1 of 2
7/10/2009, Version 1.1
Outstanding Performance
The OXPCIe200 achieves ultra high performance by
combining the class leading connectivity interface
technology, with advanced MSI interrupt handling
on-board memory and bus master DMA for maximum
throughput, minimum CPU overhead and optimal
system performance.
With a compact footprint, comprehensive power
management and industrial temperature range as
standard, the OXPCIe200 is perfect for power and
temperature sensitive ExpressCard and miniCard
designs and is
the
perfect choice for high performance
systems.
To support these advanced connectivity options, the
OXPCIe200 uses operating system native USB
drivers and dedicated PLX device drivers that are
quality assured, exhaustively tested and WHQL
approved; saving development time and providing
peace of mind.
Development Support
Design and evaluation of the OXPCIe200 couldn’t be
easier with this comprehensive reference design kit
(RDK). The RDK includes everything you need for
PC installation and evaluation including Hardware,
Oxide Development Tools and software device
drivers. Simply plug the half length PCI Express or
ExpressCard evaluation board into any PCI Express
or ExpressCard slot, install the software and its ready
to go.
Changing the dynamics of device customization,
Oxide development tools enable customization of the
OXPCIe200 in minutes. No more complex, time
consuming, error prone manual editing of
programming files and driver source code; Oxide’s
intuitive graphical user interface provides simple
‘point and click’ feature selection and text box entry
for fast, error free customization with minimal
software expertise as well as instant access to up to
date documentation, software and reference designs.
Check the PLX website for details.
OXPCIe200
Ordering Information
Part Number
OXPCIe200-TAAG
EK-OXPCIe200
Description
PCI Express Multi-Port Bridge
Reference Design Kit
京公网安备 11010802033920号
EEWORLD
