OPA453TA-1 is an OPERATIONAL AMPLIFIER. The commonly used packaging method is TO-220, 7 PIN
OPA453TA-1 amplifier core information:
The OPA453TA-1 has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its maximum average bias current is 0.0001 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA453TA-1 has a nominal slew rate of 23 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA453TA-1 gain becomes 0.707 times the low-frequency gain is 7500 kHz.
The input offset voltage of the OPA453TA-1 is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OPA453TA-1:
OPA453TA-1 has 7 terminals. Its terminal position type is: ZIG-ZAG.
OPA453TA-1 amplifier additional information:
Its temperature grade is: AUTOMOTIVE. The corresponding JESD-30 code is: R-PZFM-T7. OPA453TA-1 packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA453TA-1 package pin format is: FLANGE MOUNT.
OPA453TA-1 is an OPERATIONAL AMPLIFIER. The commonly used packaging method is TO-220, 7 PIN
OPA453TA-1 amplifier core information:
The OPA453TA-1 has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its maximum average bias current is 0.0001 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA453TA-1 has a nominal slew rate of 23 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA453TA-1 gain becomes 0.707 times the low-frequency gain is 7500 kHz.
The input offset voltage of the OPA453TA-1 is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OPA453TA-1:
OPA453TA-1 has 7 terminals. Its terminal position type is: ZIG-ZAG.
OPA453TA-1 amplifier additional information:
Its temperature grade is: AUTOMOTIVE. The corresponding JESD-30 code is: R-PZFM-T7. OPA453TA-1 packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA453TA-1 package pin format is: FLANGE MOUNT.
amplifiers with high voltage (80V) and high current
capability (50mA). The OPA452 is unity-gain stable
and has a gain bandwidth product of 1.8MHz, while
the OPA453 is optimized for gains greater than 5 and
has an 7.5MHz bandwidth.
The OPA452 and OPA453 are internally protected
against over-temperature conditions and current over-
loads. Power supplies in the range of
±10V
to
±40V
can be used. Unlike most other power op amps, the
OPA452 and OPA453 have guaranteed specifications
over the entire power supply range.
These laser-trimmed, monolithic integrated circuits
provide excellent low-level accuracy along with wide
output swing. Special design considerations assure
that the product is easy to use and free from phase
inversion problems often found in other amplifiers.
The OPA452 and OPA453 are available in TO220-7
and DDPAK-7 options. They are specified for junc-
tion temperature range, –40°C to +125°C.
APPLICATIONS
q
PIEZOELECTRIC CELLS
q
TEST EQUIPMENT
q
AUDIO AMPLIFIERS
q
TRANSDUCER DRIVERS
q
SERVO DRIVERS
7-Lead
Stagger-Formed
TO-220 (TA-1)
7-Lead
Straight-Formed
TO-220 (TA)
7-Lead
DDPAK (FA)
Surface-Mount
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
+
V
IN
NC V+ Flag
–
V
IN
V– V
O
+
V
IN
NC V+ Flag
–
V
IN
V– V
O
+
V
IN
NC V+ Flag
–
V
IN
V– V
O
NOTE: Tabs are electrically connected to V– supply.
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. (2) Input terminals are diode-clamped to the power supply
rails. Input signals that can swing more than 0.5V beyond the supply rails
should be current limited to 5mA or less.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
PACKAGE /ORDERING INFORMATION
PACKAGE
DRAWING
NUMBER
336
327
328
SPECIFIED
TEMPERATURE
RANGE
–40°C to +125°C
"
–40°C to +125°C
PACKAGE
MARKING
OPA452T
"
OPA452F
ORDERING
NUMBER
(1)
OPA452TA
OPA452TA-1
OPA452FA
OPA452FA/500
OPA453TA
OPA453TA-1
OPA452FA
OPA453FA/500
TRANSPORT
MEDIA
Rails
Rails
Rails
Tape and Reel
Rails
Rails
Rails
Tape and Reel
PRODUCT
OPA452TA
OPA452TA-1
OPA452FA
PACKAGE
TO220-7 (straight leads)
TO220-7 ZIP
DDPAK-7
"
OPA453TA
OPA453TA-1
OPA453FA
"
TO220-7 (straight leads)
TO220-7 ZIP
DDPAK-7
"
336
327
328
"
–40°C to +125°C
"
–40°C to +125°C
"
OPA453T
"
OPA452F
"
"
"
"
"
NOTES: (1) Products followed by a slash (/) are only available in Tape and Reel in the quantities indicated (e.g., /500 indicates 500 devices per reel). Ordering
500 pieces of “OPA452FA/500” will get a single 500-piece Tape and Reel.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility
for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or
licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support
devices and/or systems.
®
OPA452, OPA453
4
TYPICAL PERFORMANCE CURVES
At T
J
= +25°C, V
S
=
±40V
and R
L
= 3.8kΩ, unless otherwise noted.
All temperatures are junction temperatures unless otherwise noted. Refer to the Applications Information section to calculate junction temperatures from ambient
10. I would like to know what code development tools are available and how I can debug code targeting the CLA. Please refer to the C2000 CLA Debug FAQTasks and Interrupts 11. What is a 'task'? A CLA t...
I am using TCPMP to play videos. When TCPMP is playing, I unplug the card, and the system will give me a card unplug event. Then I close TCPMP playback. This should be fine in theory, but in actual op...
I want to build a database in wince, but add #include in my applicationA problem occurs: FilterNum.cpp C:\Program Files\Microsoft Visual Studio 8\VC\ce\atlmfc\include\AFXDB.H(15) : fatal error C1189: ...
Microcontrollers can also be referred to as MCU or μC, and some people call them single chip microcontrollers. They integrate ROM, RAM, CPU, and I/O in the same chip to provide different combinations ...
The 8K*8-bit chip in the figure below corresponds to a part of the storage space in the memory, and the memory capacity is 512K*8 bits. Find the address range of the chip in the memory. (Note: The lef...
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
5. Identifiers and keywords of C language
A complete PIC microcontroller C language program usually consists of six parts: include files (i.e. header files 1, variable definitions, variable de...[Details]
I. Introduction
Since RS232 has a short communication distance (only 15 meters according to EAT/TAI-232 standard), and can only perform point-to-point communication, it cannot directly f...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
Digital array radar (DAR) uses digital beam forming (DBF) in both receiving and transmitting modes to achieve flexible distribution and reception of RF signal power in the airspace, obtain excellent t...[Details]
TC9012F is a universal CMOS large-scale integrated circuit for infrared remote control signal transmission, suitable for remote control of TV, VTR, laser player and other equipment. In the market, ...[Details]
Abstract: In recent years, with the establishment and grid-connected power generation of a large number of solar photovoltaic power stations at home and abroad, photovoltaic grid-connected inverter...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
The TPS92210 is a single-stage LED lighting pulse width modulation (PWM) controller. The TRIAC dimmable solution not only regulates the LED current, but also achieves a power factor close to 1. The...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
Car lights, whether headlights, fog lights or tail lights, play an important role in driving safety. However, the material of the car lights determines that the probability of damage in a collision...[Details]
Currently, high-frequency and high-efficiency DCDC converters are increasingly used in automotive electronic systems.
High switching frequency can use smaller power inductors and output filter...[Details]
1 Introduction
With the development of computer technology and information technology in the world, the global information age has arrived. All countries are formulating their own development p...[Details]