(forMurata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R50E.pdf
07.3.20
Rotary Position Sensors
SMD/Lead Dust-proof Type 12mm Size SV01 Series
s
Features
1. Dust-proof construction protects the interior from
dust, which maintains stable characteristics.
2. Compliant to high peak temperature lead free
soldering.
3. Excellent resistance materials and high reliability
wiper achieves 1M cycles.
4. D formation thru-hole rotor enables selection of
any kind of gear shape.
5. Both D formation thru-hole rotor and T formation
thru-hole rotor are available.
6. Leaded terminal type is available.
7. Ultra-thin size (2.1mm height)
8. Au plated terminals without Lead.
9. Complies with RoHS directive.
12.0
#2
4.0
-0
+0.1
+0
2.1
0.6
Dia.
3.0
-0
+0.1
SV01A
4-0.8±0.1
5.0
8.5±0.1
14.9
8.2
5.5
(
Tolerancein:
±0.3
)
mm
6.9±0.5 5.4±0.5 0.20±0.03
Mounting Face
2.9 3.5
4.0
+0.1
Dia.
-0
#2
12.0
s
Applications
1. Animal robot
2. Switch for automotive
3. Motor drive unit
4. Radio control equipment
5. Car audio (navigation system, changer)
4-0.8±0.2
11.0
5.0
3.0
SV01L
5.0
7.5
(
Tolerancein:
±0.3
)
mm
s
T formation Thru-hole rotor
4.0
+0.1
Dia.
-0
1.2
3.0
+0.1
-0
(
Tolerancein:
±0.3
)
mm
Part Number
SV01A103pEA01
SV01L103pEA11
Total Resistance Value
(k ohm)
10
±30%
10
±30%
Linearity
(%)
±2
±2
Effective Rotational Angle
333.3° (Ref.)
333.3° (Ref.)
Rotational Torque
2mN
•
m (Ref.; 21gf
•
cm) max.
2mN
•
m (Ref.; 21gf
•
cm) max.
Rotational Life
1M cycles
1M cycles
4-1.0 Dia.
#1 #2
#3
3.0
+0.1
-0
+0.05
#1 #2 #3
11.0
0.2
1.0
2-1.00
-0.10
Dia.
5.0
-0.1
Dia.
9
A blank column is filled with Rotor Formation Codes. (A: D formation thru-hole rotor C: T formation thru-hole rotor)
51
!Note
• This PDF catalog is downloadedand
!CAUTION
(forMurata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R50E.pdf
07.3.20
s
Construction
Rotor
Cover
#2 Terminal
Resin Substrate
#3 Terminal
#2 Terminal
Resistive Element
Wiper
#1 Terminal
s
Standard Land Pattern
SV01A
s
Standard Mounting Holes
SV01L
4-1.0
-0
Dia.
+0.1
7.2
5.2
(5
.8
D
ia
.)
(1.1)
8.7
6.7
(5.5)
4-1.8
5.0
(8.5)
2.5
2.5
5.0
7.0
5.5
(
Tolerance:
±0.1
in mm
)
(
Tolerance:
±0.1
in mm
)
s
Characteristics
Temperature Cycle
(Thermal Shock)
Humidity
Vibration
Shock (20G)
Humidity Load Life
High Temperature
Exposure
Low Temperature
Exposure
Rotational Life
∆TR
:
±20%
Linearity:
±3%
∆TR
:
±20%
Linearity:
±3%
∆TR
:
±10%
Linearity:
±3%
∆TR
:
±10%
Linearity:
±3%
∆TR
:
±20%
Linearity:
±3%
∆TR
: +5/-30%
Linearity:
±3%
∆TR
:
±20%
Linearity:
±3%
∆TR
:
±20%
Linearity:
±3%
(1M cycles)
∆TR:
Total Resistance Change
9
52
!Note
• This PDF catalog is downloadedand
!CAUTION
(forMurata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R50E.pdf
07.3.20
SV01 Series Notice
s
Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40deg. C and
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. Do not use the rotary position sensor under the
following environmental conditions. If you use
the rotary position sensor in an environment other
than listed below, please consult a Murata factory
representative prior to using.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
(Ex. Water, Oil, Medical liquid, Organic
solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
s
Notice (Soldering and Mounting)
1. Soldering
(1) SV01 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) The dimension of land pattern used should be
Murata's standard land pattern at reflow
soldering. Excessive land area may cause
displacement due to the effect of the surface
tension of the solder. Insufficient land area
may cause insufficient soldering strength on PCB
(SMD Type).
(3) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive temperature,
the rotary position sensor may deviate from the
specified characteristics.
(4) The amount of solder is critical. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the
terminals.
(5) The soldering iron should not come in contact
with the cover of the rotary position sensor. If
such contact does occur, the rotary position
sensor may be damaged.
2. Mounting
(1) Use PCB hole to meet the pin of the rotary
position sensor. If the rotary position sensor
is inserted into insufficient PCB hole, the
rotary position sensor may be damaged by
mechanical stress. (Lead type)
(2) Do not apply excessive force, preferable 9.8N
max. (Ref. 1kgf) when the rotary position sensor
is mounted to the PCB.
(3) Do not warp and/or bend PCB to prevent the rotary
position sensor from breakage.
3. Cleaning
Cannot be cleaned because of open construction.
9
53
!Note
• This PDF catalog is downloadedand
!CAUTION
(forMurata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R50E.pdf
07.3.20
SV01 Series Notice
s
Soldering Profile
Reflow Soldering Profile
1. Soldering profile for Lead-free solder (96.5Sn/3.0Ag/0.5Cu)
T5
Temperature (°C)
T3
T2
T1
t2
t3
Limit Profile
Standard Profile
T4
t1
Time (s)
Standard Profile
Pre-heating
Series
Temp. (T1)
°C
Time (t1)
sec.
Peak
Heating
Cycle of
Temperature
Reflow
Temp. (T2) Time (t2)
(T3)
°C
sec.
°C
Time
Pre-heating
Temp. (T1)
°C
Time (t1)
sec.
Limit Profile
Heating
Temp. (T4)
°C
Peak
Cycle of
Temperature
Reflow
Time (t3)
(T5)
sec.
°C
Time
SV01A
150 to 180 60 to 120
220
30 to 60
245±3
2
150 to 180 60 to 120
230
30 to 50
260 +5/-0
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Pre-heating
T2
T1
t2
Standard Profile
Temperature (°C)
T3
Heating
Temp. (T2)
°C
Series
Temp. (T1)
°C
Time (t1)
sec.
Peak
Cycle of
Temperature
Reflow
Time (t2)
(T3)
sec.
°C
Time
SV01A
150
60 to 120
183
30
230
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
°C
Soldering Time
sec.
Soldering Iron Power Output
W
Cycle of Soldering Iron
Time
SV01
350±10
3 max.
30 max.
1
s
Notice (Handling)
Uncontrolled mechanical force (except usual rotation on
the hollow rotor of product) may cause a change of
electrical characteristics, an increase of rotational
torque or mechanical damage of the product.
Therefore, please consider the following points
for your design.
1. The product must be soldered by the terminals.
Do not affix by screw clamping to support board
as this could cause mechanical deformation.
2. The connecting shaft must be sustained by the
bearing. No uncontrolled force should be applied
to the hollow rotor.
s
Notice (Other)
1. Please make sure the connecting impedance is not
less than 10M ohm. The rotary position sensor
is designed to connect the output terminal and A/D
port of the microprocessor directly. Therefore,
connecting impedance presupposes certain M ohm and
the contact resistance is set high.
2. To minimize processing errors and rare cases of
noise influence when data is installed,
please consider the following when programming
your software.
(1) Data install should be done plural times and
applied the mean value.
54
9
(2) Data considered as error should be invalid.
(3) If suspicious data is found, the data should be
re-installed.
3. Before using rotary position sensor, please test
after assembly in your particular mass production
system.
4. MURATA cannot guarantee rotary position sensor
integrity when used under conditions other than
those specified in this document.
!Note
• This PDF catalog is downloadedand
!CAUTION
(forMurata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R50E.pdf
07.3.20
Rotary Position Sensors SMD/Lead Dust-proof Type (SV01) Specifications and Test Methods
The tests and measurements should be conducted under the condition of 15 to 35°C of temperature 25 to 75% of relative humidity and 86 to 106 kpa of
atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned
conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature, 45 to 55% of relative humidity and 86 to
106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C,
25 to 75%RH) over 24 hours except "Resistance to soldering heat".
Test Methods
Independent linearity should vary no more than ±2% within ±160° to 50% voltage ratio.
Taper : linear, 100%/333.3° Measured with the circuit as below (Figure 1).
100%
Guarantee limit for linearity
DC5V (#3)
Output voltage ratio (%)
V (1-2)
X100
V (1-3)
50%
100% / 333.3°
GND (#1)
No.
Item
1
Linearity
Connection Impedance : 1M ohm min.
Output (#2)
0%
-160°
CCW
0°
CW
+160°
Figure-1
Rotational angle (°)
The rotary position sensor should be subjected to each of the following temperatures (see Table 1) for 30-45 minutes.
Temperature coefficient of resistance should be applied to the following formula.
TCR=
Temperature
Coefficient of
Resistance
R
2
– R
1
R
1
(t
2
– t
1
)
Z
10
6
(ppm/°C)
2
t
1
: Reference temperature in degrees celsius
t
2
: Test temperature in degrees celsius
R
1
: Resistance at reference temperature in ohm
R
2
: Resistance at test temperature in ohm
2
Sequence
*1
-40
Temperature (°C)
+25
Note * : Reference temperature
Table 1: Test temperatures
*3
+25
4
+85
The rotary position sensor should be subjected to Table 2 temperature for 5 cycles.
Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs.
3
Temperature
Cycle
(Thermal Shock)
Sequence
Temperature (°C)
Time (min.)
1
-40±3
30
2
+25±2
5 max.
3
+85±3
30
4
+25±2
5 max.
Table 2: One cycle of temperature cycle
4
Humidity
The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative humidity of 90-95% for 250±8
hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz
(should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours).
Then, the rotary position sensor should be kept in the dry box for 1-2 hrs.
The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks
in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for
1-2 hrs.
Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of
the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and
relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-
0 hours.
The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After
removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After
removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for
6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading.
京公网安备 11010802033920号
EEWORLD
