EEWORLDEEWORLDEEWORLD

Part Number

Search

5082-A901-MP000

Description
Low Current Seven Segment Displays
File Size343KB,20 Pages
ManufacturerHP(Keysight)
Websitehttp://www.semiconductor.agilent.com/
Download Datasheet View All

5082-A901-MP000 Overview

Low Current Seven Segment Displays

Low Current Seven Segment
Displays
Technical Data
HDSP-335x Series
HDSP-555x Series
HDSP-751x Series
HDSP-A10x Series
HDSP-A80x Series
HDSP-A90x Series
HDSP-E10x Series
HDSP-F10x Series
HDSP-G10x Series
HDSP-H10x Series
HDSP-K12x, K70x Series
HDSP-N10x Series
HDSP-N40x Series
Features
Low Power Consumption
Industry Standard Size
Industry Standard Pinout
Choice of Character Size
7.6 mm (0.30 in), 10 mm (0.40
in), 10.9 mm (0.43 in), 14.2
mm (0.56 in), 20 mm (0.80 in)
Choice of Colors
AlGaAs Red, High Efficiency
Red (HER), Yellow, Green
Excellent Appearance
Evenly Lighted Segments
±50°
Viewing Angle
Design Flexibility
Common Anode or Common
Cathode
Single and Dual Digit
Left and Right Hand Decimal
Points
±1.
Overflow Character
Categorized for Luminous
Intensity
Yellow and Green Categorized
for Color
Use of Like Categories Yields a
Uniform Display
Excellent for Long Digit
String Multiplexing
Description
These low current seven segment
displays are designed for applica-
tions requiring low power
consumption. They are tested and
selected for their excellent low
current characteristics to ensure
that the segments are matched at
low currents. Drive currents as
low as 1 mA per segment are
available.
Pin for pin equivalent displays
are also available in a standard
current or high light ambient
design. The standard current
displays are available in all colors
and are ideal for most applica-
tions. The high light ambient
displays are ideal for sunlight
ambients or long string lengths.
For additional information see
the 7.6 mm Micro Bright Seven
Segment Displays, 10 mm Seven
Segment Displays, 7.6 mm/10.9
mm Seven Segment Displays,
14.2 mm Seven Segment
Displays, 20 mm Seven Segment
Displays, or High Light Ambient
Seven Segment Displays data
sheets.
Please recommend a few transconductance amplifier chips, that is, voltage-to-current conversion
Please recommend a few transconductance amplifier chips, preferably with a bandwidth of 40MHz. If not, try to make the current output between 10MHz and 40MHz relatively smooth. I used OPA861 before, b...
caijianfa55 Microcontroller MCU
AVR and 12864 LCD problem
I want a program to draw dots, but after writing it, I find that the data read from the LCD is always 0x80. I don't know why....
adi111 Microchip MCU
Application of FIR algorithm implemented by FPGA in automobile dynamic weighing instrument
Abstract: This paper introduces the FIR algorithm implemented by FPGA, and analyzes the results of applying this algorithm to the dynamic weighing instrument of automobiles. Practice has proved that t...
frozenviolet Automotive Electronics
The first flight accident of Dr. Dot's micro quadcopter
The first flight accident of Dr. Dot's micro quadcopter Today, when I installed the lithium battery with power on, a puff of green smoke suddenly appeared. :Cry::Cry::Cry::Cry::Cry::Cry: The tank capa...
圆点博士 DIY/Open Source Hardware
About the problem of SPI clock not output
Does SPI have a clock signal as long as it sends data? Now there is data sent out, but there is no clock signal output. I have set it up like this: master mode, SDO controlled by the module, 8-bit tra...
calphone Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2569  2626  1636  817  829  52  53  33  17  49 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号