5962F0252304V9A datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> 5962F0252304V9A

5962F0252304V9A: DescriptionMicrocontroller, 16-Bit, 8096 CPU, 20MHz, CMOS,; CategoryThe embedded processor and controller Microcontrollers and processors; File Size230KB，42 Pages; ManufacturerCobham PLC

Download Datasheet Parametric View All

5962F0252304V9A Overview

Microcontroller, 16-Bit, 8096 CPU, 20MHz, CMOS,

5962F0252304V9A Parametric

Parameter Name	Attribute value
Reach Compliance Code	unknown
Has ADC	NO
Address bus width	16
bit size	16
CPU series	8096
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	NO
External data bus width	8
Maximum operating temperature	125 °C
Minimum operating temperature	-40 °C
PWM channel	YES
encapsulated code	DIE
Encapsulate equivalent code	DIE OR CHIP
Package shape	UNSPECIFIED
Package form	UNCASED CHIP
power supply	5 V
Certification status	Not Qualified
RAM (bytes)	1000
rom(word)	0
Filter level	38535V;38534K;883S
speed	20 MHz
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	AUTOMOTIVE
Terminal form	NO LEAD
Terminal location	UPPER
total dose	300k Rad(Si) V
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Update boilerplate to current MIL-PRF-38535 requirements. - CFS

Add device types -03 and -04. Reduce the RHA Total Dose from 300krads to

100krads for device types 01 and 02. - CFS

DATE (YR-MO-DA)

07-05-14

08-12-01

APPROVED

Thomas M. Hess

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Larry T. Gauder

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

Charles F. Saffle

APPROVED BY

Thomas M. Hess

DRAWING APPROVAL DATE

02-09-26

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

http://www.dscc.dla.mil

MICROCIRCUIT, DIGITAL, CMOS, RADIATION

HARDENED, MCS-96 BASED

MICROCONTROLLER, MONOLITHIC SILICON

AMSC N/A

REVISION LEVEL

SIZE

CAGE CODE

67268

1 OF

5962-02523

DSCC FORM 2233

APR 97

SHEET

5962-E310-08

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535

Integrated Circuits, Manufacturing, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883

MIL-STD-1835

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103

MIL-HDBK-780

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

(Copies of these documents are available online at

http://assist.daps.dla.mil/quicksearch/

http://assist.daps.dla.mil

or from

the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Non-government publications. The following document(s) form a part of this document to the extent specified herein.

Unless otherwise specified, the issues of the documents are the issues of the documents cited in the solicitation or contract.

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

ASTM F1192

Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion

Irradiation of Semiconductor Devices.

(Copies of these documents are available online at

http://www.astm.org

or from ASTM International, 100 Barr Harbor Drive,

P.O. Box C700, West Conshohocken, PA 19428-2959.)

2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of

this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with

MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The

modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for

device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified

herein.

3.1.1 Microcircuit die. For the requirements of microcircuit die, see appendix A to this document.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-02523

SHEET

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in

MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.2.3 Block diagram. The block diagram shall be as specified on figure 3.

3.2.4 Load circuit and waveforms. The Load circuit and waveforms shall be as specified on figure 4.

3.2.5 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document

revision level control and shall be made available to the preparing and acquiring activity upon request.

3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the

electrical performance characteristics and postirradiation parameter limits are as specified in table IA and shall apply over the full

case operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical

tests for each subgroup are defined in table IA.

3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be

marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer

has the option of not marking the "5962-" on the device. For RHA product using this option, the RHA designator shall still be

marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be

in accordance with MIL-PRF-38535, appendix A.

3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in

MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.

3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535

listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of

compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see

6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this

drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and

herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.

3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for

device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.

3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2

herein) involving devices acquired to this drawing is required for any change that affects this drawing.

3.9 Verification and review for device class M. For device class M, DSCC, DSCC's agent, and the acquiring activity retain the

option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.

3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

microcircuit group number 105 (see MIL-PRF-38535, appendix A).

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-02523

SHEET

Recommended Resources

silicon bridge rectifier

Timing exhaust controller circuit

Low power consumption timing circuit

Basic application circuit diagram of LM317

Charge protection circuit for nickel-cadmium batteries

555 simple car anti-traffic alarm circuit

Talk about the EVAL-CN0300-EB1Z evaluation board: Talk about the EVAL-CN0300-EB1Z evaluation boardThis board uses ADuCM360 , a high-precision 24- bit sigma-delta (Σ-Δ) ADC with M3 core , corresponding to the output of 4mA to 20mA . The circuit is as ...; dontium ADI Reference Circuit

Three steps to learn DSP: [p=26, null, left][color=#333333][font=Arial] From a novice who knew nothing about embedded systems to completing a project that I was satisfied with when I was about to graduate, I went through many ...; fish001 Microcontroller MCU

Documentation on porting BootLoader on ARM9 development board: Using U-BOOT to Build the Boot Loader of Embedded System...; daat ARM Technology

Dream Travel EZ430 series study notes and smart home system project internal temperature collection and serial port display: I received the board a few days ago, but I didn't have time to play with it. I played with it yesterday and got the following results. I have never come into contact with msp430 before. Haha, I was su...; 梦之旅 Microcontroller MCU

Declaration of static variables: [color=#0000ff][b]Statically declared variables have two characteristics in C language: [/b] [/color] 1) The variable will be placed in the global storage area of the program, so that the original val...; mikezhong Microchip MCU

ndis filters network packets???: How to develop a driver in the NDIS layer to filter the source IP of the data packet? That is, analyze the source IP address of the intercepted data packet and compare it with the IP segment in the po...; lilizhen329 Embedded System

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components