5962-8962801ZX datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> 5962-8962801ZX

5962-8962801ZX: DescriptionFixed Positive Standard Regulator, 8VBIPolar,; CategoryPower/power management The power supply circuit; File Size169KB，13 Pages; ManufacturerLinfinity Microelectronics

Download Datasheet Parametric Compare View All

5962-8962801ZX Overview

Fixed Positive Standard Regulator, 8VBIPolar,

5962-8962801ZX Parametric

Parameter Name	Attribute value
Reach Compliance Code	unknown
Adjustability	FIXED
Nominal dropback voltage 1	2.5 V
Maximum absolute input voltage	35 V
Maximum grid adjustment rate	0.06%
Maximum load regulation	0.1%
Output times	1
Number of terminals	3
Working temperatureTJ-Max	150 °C
Working temperature TJ-Min	-55 °C
Maximum output current 1	1 A
Nominal output voltage 1	8 V
Package body material	METAL
Encapsulate equivalent code	TO-213/-66
Certification status	Not Qualified
Regulator type	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR
Filter level	38535Q/M;38534H;883B
technology	BIPOLAR
Maximum voltage tolerance	3%
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Change footnotes in conditions for standby current drain tests. Footnote 1,

table I, change input voltage limits. Add case outline U.

Changes in accordance with N.O.R. 5962-R085-94.

Drawing updated to reflect current requirements. - ro

Add a footnote to the case outline U, TO-257 package as specified under

1.2.2. and figure 1. - ro

Drawing updated to reflect current requirements. -rrp

Update drawing to current MIL-PRF-38535 requirements. -rrp

DATE (YR-MO-DA)

92-01-13

APPROVED

M. A. FRYE

94-03-07

01-04-19

05-01-26

M. A. FRYE

R. MONNIN

11-04-13

17-10-12

C. SAFFLE

THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

JOSEPH A. KERBY

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

CHARLES E. BESORE

APPROVED BY

MICHAEL A. FRYE

DRAWING APPROVAL DATE

89-08-18

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

http://www.landandmaritime.dla.mil

MICROCIRCUIT, LINEAR, 8-VOLT POSITIVE

REGULATOR FIXED, MONOLITHIC SILICON

AMSC N/A

REVISION LEVEL

SIZE

CAGE CODE

67268

SHEET

1 OF 12

5962-89628

DSCC FORM 2233

APR 97

5962-E603-17

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-

JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer

Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-

PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying

activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan

may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.

These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-

PRF-38535 is required to identify when the QML flow option is used. This drawing has been modified to allow the

manufacturer to use the alternate die/fabrication requirements of paragraph A.3.2.2 of MIL-PRF-38535 or other alternative

approved by the qualifying activity.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535, appendix A and herein.

3.2.1 Case outlines. The case outline shall be in accordance with 1.2.2 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full ambient operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are described in table I.

3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN

listed in 1.2 herein. In addition, the manufacturer's PIN may also be marked. In addition, the manufacturer's PIN may also be

marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer

has the option of not marking the "5962-" on the device.

3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance

to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in

accordance with MIL-PRF-38535 to identify when the QML flow option is used. For product built in accordance with A.3.2.2 of

MIL-PRF-38535, or as modified in the manufacturer’s QM plan, the “QD” certification mark shall be used in place of the "Q" or

"QML" certification mark.

3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an

approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and

Maritime -VA prior to listing as an approved source of supply shall affirm that the manufacturer's product meets the

requirements of MIL-PRF-38535, appendix A and the requirements herein.

3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided

with each lot of microcircuits delivered to this drawing.

3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that

affects this drawing.

3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritime's agent, and the acquiring activity retain the

option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-89628

SHEET

5962-8962801ZX Related Products

	5962-8962801ZX	5962-8962801UX	5962-8962801XX	5962-8962801UA	5962-8962801YX	5962-8962801ZA	5962-8962801XA	5962-8962801YA
Description	Fixed Positive Standard Regulator, 8VBIPolar,	Fixed Positive Standard Regulator, 8VBIPolar,	Fixed Positive Standard Regulator, 8VBIPolar, MBCY3,	Fixed Positive Standard Regulator,	Fixed Positive Standard Regulator, 8VBIPolar,	Fixed Positive Standard Regulator,	Fixed Positive Standard Regulator,	Fixed Positive Standard Regulator,
Reach Compliance Code	unknown	unknown	unknown	unknown	unknown	unknown	unknown	unknown
Certification status	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified
Regulator type	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR
Base Number Matches	1	1	1	1	1	1	1	1

Recommended Resources

Digital timer with one digit display

Two lamps and one switch incandescent lamp parallel lighting circuit

Infrared remote control receiver with 60 commands

Clever use of TDA7052 as a single-chip radio circuit diagram

Audio power amplifier circuit MC3360P

555 simple and practical music light control circuit

Performance introduction and application of infrared receiver dedicated module: Performance introduction and application of infrared receiver dedicated module...; xtss Analog electronics

[FPGA Technology] Offset Constraints and Diagrams: The skew constraint refers to the constraint between data and clock . The skew constraint specifies the timing relationship between the external clock and the data input and output pins. It is only us...; eeleader FPGA/CPLD

About interrupt timing: For example, in a system, there is keyboard scanning, LED dynamic display, and interruption in the system. How to set the interruption time constant so that it does not interfere with the display, tha...; dlw123 Embedded System

Original: 7-segment digital tube pin sequence and decoding driver integrated circuit 74LS47, 48: 7-segment digital tube pin sequence and decoding driver integrated circuit 74LS47, 48 Here is an introduction to the 7-segment digital tube as shown in the figure below [font=楷体_GB2312][b][size=4][col...; weigaole Analog electronics

Introduction to Commonly Used AD/DA Chips: [i=s]This post was last edited by paulhyde on 2014-9-15 03:22[/i][align=left] [/align][align=center][b]Introduction to currently commonly used AD/DA chips[/b][/align][align=left][font=宋体]The main manu...; paulhyde Electronics Design Contest

My score: Come join in the fun!!...; SY1103333 Discrete Device

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components