The polarization beam combiner and depolarizer is a compact, high-performance
micro-optic-based depolarizing component. It normally functions as a combiner
to combine two orthogonal-polarized pump beams together and then converts
it to a depolarized beam at the output port. Depending on special customer
requirements, the isolator functionality can be integrated with the depolarizer or
remain as a stand-alone depolarizer without combining functionality.
• Telcordia GR-1221
north america
:
800 498-JDSU (5378)
worlDwiDe
:
+800 5378-JDSU
webSite
:
www.jdsu.com
polarization Beam comBiner anD Depolarizer
2
Dimensions Diagram
PBCD
IPBCD
Standalone depolarizer
All dimensions are mm.
specifications
parameter
pBcD
ipBcD
stand-alone
Depolarizer
Center wavelength, λ
C
Wavelength range, λ
S
Insertion loss
1
Wavelength-dependent loss
Degree of polarization
Isolation
Return loss
Input power
2
Operating temperature
Storage temperature
Tensile load
Dimensions (D x L)
Fiber type
Pigtail color code
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1450 nm
λ
C
±30 nm
0.8 dB
0.9 dB
0.7 dB
0.15 dB
10%
N/A
20 dB
N/A
50 dB
2000 mW
–5 to 75°C
–40 to 85°C
5 N
5.5 x 58 mm
Ports 1 and 2: Panda PM fiber, port 3: SMF-28 fiber
Port 1: black, port 2: clear, port 3: clear
Note: Parameters are specified for the whole wavelength range and operating temperature range without a connector. The direction of linear polarization is aligned with the
slow axis of the PM fiber.
1. Extra loss from pump PER is excluded.
2. Maximum input power for each port is 1000 mW.
polarization Beam comBiner anD Depolarizer
ordering information
For more information on this or other products and their availability, please contact your local JDSU account manager
or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
sample: pBD-c34p10000
pBD-
code
C
I
S
code
34P
S34
XXX
Functions
Polarization beam combiner
and depolarizer
Polarization beam combiner
and depolarizer with isolator
Stand-alone depolarizer
pump Dependent
JDSU Raman pump S34+
JDSU Raman pump S34
Others. Please contact JDSU for
further ordering information.
code
1
2
code
0
1
Fiber length
1 m
2 m
Fiber Buffer type
250 µm bare fiber¹
900 µm loose tube
code
0
1
2
3
4
code
0
1
2
3
4
connector² (port 1)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
connector² (port 2)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
code
0
1
2
3
4
connector² (port 3)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
1. Connector is not available on 250 µm bare fiber.
2. Insertion loss and return loss depend on connector type.
Hello everyone, I have encountered the following problems using Atmel AVR mega32 microcontroller, please advise. 1. To scan the 3*3 matrix buttons, first scan and then look up the table to get the but...
I have a ds1302 clock module and some digital tubes, so I tried to make a clock. Of course, it is handmade, so it is not as good-looking as the ones bought on Taobao. Of course, the cost of making it ...
RVB2601 comes with a monochrome OLED screen, which is sufficient for small application development. However, based on the hardware conditions of 2601 itself, the pre-installed monochrome screen cannot...
I was conscripted temporarily, let me tell you a simple questionSummer is here, and more people are using fans. When I went to the store, I saw a lot of new products, including remote-controlled, step...
I would like to ask how to calculate the size of the assembly top border and the size of the silkscreen border when Allegro builds the package? Thank you...
//This program has been debugged on the MSP430F5529 platform through #include#define MSB_H P1OUT|=BIT4
#define RS_H P1OUT|=BIT5
#define MSB_L P1OUT=~BIT4
#define RS_L P1OUT=~BIT5
#define DAC_A0x4000
#...
Microchip MCU
京公网安备 11010802033920号
EEWORLD
