PRELIMINARY DATA SHEET
|
OCTOBER 28, 2007
PONA 3000 Series Erbium Doped Fiber Amplifier
Applications
•
•
•
•
High Performance Supertrunking Links
High Power Distribution Networks
Fiber Deep Architectures
FTTx Networks
Features
•
•
•
•
Full Function High Power Fiber Optic
Amplifier Ready for Integration
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: –10 dBm to
+12 dBm
Total Output Power: +27 dBm to
+35 dBm (Optical Output Power
Splitter is Optional For These Units)
•
•
•
•
•
Standard RS-232 Communications
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding
noise performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 3000 series optical amplifiers provide optical
isolation on the input and output of the gain block for stable, low noise
operation.
The input and output optical signal power levels are
The input optical signal is
detected for monitoring and control.
amplified with active gain control for a constant output power level, or
with active output power control for constant gain mode. The PONA
3000 series optical amplifiers also provide monitoring functions and
associated alarms for all vital characteristics. The optical output of the
PONA 3000 series optical amplifiers can be split into number of ports
by an optional internal splitter.
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
1 of 6
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET
|
OCTOBER 28, 2007
Specifications
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
Power Consumption
(steady state regime)
Remnant pump power to output
UNIT
LIMIT
3027
Pin (dBm)
Pin (dBm)
Po (dBm)
NF (dB)
GF (dB)
(dB)
(dB)
Psys (W)
Max
Min
Typ/Max
Max
Max
Max
Max
+12
-10
27.0
5.5/6.0
+/-1.0
+/-2.00
+/- 0.25
40
25
<-30
PONA MODELS
3030
3032
+12
-10
30.0
5.5/6.0
+/-1.0
+/-2.00
+/- 0.25
50
30
<-30
+12
-10
32.0
5.5/6.0
+/-1.0
+/-2.25
+/-0.25
65
40
<-30
COMMENT
3035
(note 1)
+12
-10
35.0
5.5/6.0
+/-1.0
+/-2.50
+/- 0.25
80
50
<-30
Nominal (note 2)
(note 3)
(note 4)
(note 5)
(note 6)
o
50 C Case (premium)
o
50 C Case (economy)
(note7)
Prp (dBm)
Nom.
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value
3) Measured @ 25°C,
ΣPin
= 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
Physical
GENERAL PROPERTY
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
REQUIREMENT
1545 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to -60 V DC
COMMENTS
Standard
Standard
Standard
Non-condensing
AC version
DC version
*(Redundant Power Supply is
Available by Customer Request)
Optical Connectors
Dimensions In Inches
See ordering information
19.0”W x 14.76”D x 3.44”H
User Specified
19’’ Rack Mounted, 2 RU
2 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET
|
OCTOBER 28, 2007
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and
multi-mode pump lasers) to produce cost effective high power optical amplification. This technology
enables the development of higher power EDFAs-something that is cost prohibitive when using
standard erbium fiber and single mode pumps.
Er/Yb Assembly
Input
Hybrid
Er
Filter / Isolator
Isolator
1% Tap
980 nm
pump
Input
monitor
Multi-mode
pumps
Output
Monitor
Drive
Electronics
Sample FTTx Architecture
Splitter
Voice
Data
OLT
1490nm
1310nm
ONT
ONT
ONT
ONT
Businesses
- Voice
- Data
- Video
WDM
1550nm
1550nm
Tx
Video
RF
Splitter
Splitter
ONT
ONT
ONT
ONT
Multi
Dwelling Units
20 Km
Splitter
ONT
ONT
ONT
ONT
EDFA
20
outputs of
20
dBm
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Homes
3 of 6
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET
|
OCTOBER 28, 2007
Outline Drawing
AC and DC versions shown below with 8-port option
4 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET
|
OCTOBER 28, 2007
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV
laser product based on the maximum optical output power shown below. During use as intended, the
laser energy is fully contained within the fiber network such that there is no accessible laser radiation
and would meet the requirements for a Class I laser product. The laser product report has been
submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1545 ~ 1562 nm (dependant on input source)
Maximum Output Power = 3.2 W (single output, 35 dBm model)
5 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
