PRODUCT SUMMARY
SKY65534-11: 2.4 GHz WLAN/Bluetooth
®
Front-End Module
Applications
•
WiFi-enabled smartphones, tablets, and mobile/portable devices
•
System-in-Package (SIP) modules for embedded systems
Features
•
Integrated high performance 2.4 GHz PA, harmonic filter, LNA
with bypass, and T/R switch
•
Fully-matched input and output
•
LNA with integrated bypass mode
•
High performance SP3T switch to support Bluetooth/WiFi
functions
•
Integrated positive slope power detector
•
Transmit gain: 26 dB
•
Receive gain: 12 dB
•
Output power: +19 dBm @ 3% EVM, 64 QAM 3/4
•
Direct connection to battery with 3.6 V nominal supply
•
Small, QFN (16-pin, 2.5 x 2.5 mm) package (MSL1, 260
°C
per
JEDEC J-STD-020)
Figure 1. SKY65534-11 Block Diagram
Description
The SKY65534-11 is a complete 802.11b/g/n WLAN RF Front-End
Module (FEM) with a Bluetooth port. The device provides all the
functionality of a fully matched Power Amplifier (PA), power
detector, harmonic filter, Low-Noise Amplifier (LNA), and Single-
Pole, Triple-Throw (SP3T) switch.
The SKY65534-11 provides a complete 2.4 GHz WLAN RF solution
from the output of the transceiver to the antenna, and from the
antenna to the input of the transceiver. The LNA increases the
receive sensitivity of embedded solutions to improve range or to
overcome the insertion loss of cellular filters (often included for
mobile applications).
The SKY65534-11 also includes a transmitter power detector with
20 dB of dynamic range, and a digital enable control for
transmitter power ramp on/off control.
The device is provided in an ultra- compact, 16-pin 2.5 x 2.5 mm
Quad Flat No-Lead (QFN) package. A functional block diagram is
shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201954A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 14, 2012
1
PRODUCT SUMMARY • SKY65534-11 FRONT-END MODULE
Ordering Information
Model Name
SKY65534-11 2.4 GHz Front-End Module
Manufacturing Part Number
SKY65534-11
Evaluation Board Part Number
SKY65534-EVB
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
May 14, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201954A
京公网安备 11010802033920号
EEWORLD
