B45196L2225K109 datasheet, PDF

Datasheet> All Categories > Passive components> capacitor> B45196L2225K109

B45196L2225K109: DescriptionCAPACITOR, TANTALUM, SOLID, POLARIZED, 10V, 2.2uF, SURFACE MOUNT, 1206, CHIP, ROHS COMPLIANT; CategoryPassive components capacitor; File Size431KB，6 Pages; ManufacturerEPCOS (TDK); Environmental Compliance

Download Datasheet Parametric View All

B45196L2225K109 Overview

CAPACITOR, TANTALUM, SOLID, POLARIZED, 10V, 2.2uF, SURFACE MOUNT, 1206, CHIP, ROHS COMPLIANT

B45196L2225K109 Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	EPCOS (TDK)
package instruction	, 1206
Reach Compliance Code	compliant
ECCN code	EAR99
capacitance	2.2 µF
Capacitor type	TANTALUM CAPACITOR
dielectric materials	TANTALUM (DRY/SOLID)
JESD-609 code	e3
leakage current	0.0005 mA
Manufacturer's serial number	B45196L
Installation features	SURFACE MOUNT
negative tolerance	10%
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package shape	RECTANGULAR PACKAGE
method of packing	TR, 7 INCH
polarity	POLARIZED
positive tolerance	10%
Rated (DC) voltage (URdc)	10 V
size code	1206
surface mount	YES
Delta tangent	0.06
Terminal surface	Matte Tin (Sn)
Terminal shape	J BEND
Base Number Matches	1

Preview

Download Datasheet

View All

Tantalum chip capacitors

Automotive

Ordering code:

Date:

B45196L1106+10*

July 2006

information contained therein without EPCOS' prior express consent is prohibited.

Tantalum chip capacitors

Automotive

Cautions and warnings

B45196L1106+10*

When using tantalum capacitors with a manganese dioxide coating, the following cautions and

warnings should be taken into account:

Polarity

Because tantalum capacitors are

polar capacitors,

it is important to observe their polarity

markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity

resulting from the sum of the AC and DC voltage components must be smaller than or equal to

the permitted

polarity reversal voltage

(see “General technical information”, section 4.6 and

section 4.8 under www.epcos.com/tantalum_capacitors). To avoid reducing their reliability, this

voltage may only occur for a short time, at most five times for a duration of one minute per hour.

Voltage

The

maximum continuous voltage

depends on the ambient temperature. Within the temperature

range of 55 to +85

°C,

the rated voltage is equal to the maximum continuous voltage. Between

+ 85 and + 125

°C

the maximum continuous voltage must be reduced linearly from the full rated

voltage to 2/3 of it (derating). At 150

°C

(only B4519*P series) the voltage must be reduced to 1/2

and at 175

°C

(only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum

continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous

voltage must not be exceeded (see“Quality and environment”, section 1.11 under

www.epcos.com/tantalum_capacitors).

All unfavourable operating conditions (such as possible line overvoltages, unfavourable

tolerances of the transformation ratio of the line transformer in the equipment, repeated

overvoltages when the equipment is switched on, high ambient temperatures) must be taken into

account when determining the

operating voltage.

The

surge voltage

is the maximum voltage (peak value) that may be applied to the capacitor for

short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage

must not be applied for periodic charging and discharging in the course of normal operation and

cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this

data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that

exceed the surge voltage may lead to irreparable damage.

Capacitance

The actual

capacitance

of a capacitor can deviate from the rated capacitance by as much as the

full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at

+125

°C

+12% up to +20%) and decreases with increasing frequency (see “General technical

information”, section 5 under www.epcos.com/tantalum_capacitors).

Please read

Important notes

and

Cautions and warnings

at the end of this document.

Page 4 of 6

Recommended Resources

Adjustment and testing of RC bridge oscillation circuit

Control the DC motor starting circuit according to the current principle

ACC circuit

Four types of DC conversion boost power supply circuit diagrams

Dual tracking regulated power supply

Computer motherboard circuit diagram 815 4_19

Small boss, big subordinate: Where there is a world, there are factions; where there is a boss, there are subordinates. According to a comrade who has been tortured by various bosses, the bosses born in the 1960s are the best at ...; 心仪 Talking about work

Automatic control, is there a simple way to set the parameters of the pi controller?: After adding pi, the open loop transfer function is: num=[-10.3*kp (9.3*kp-10.3*ki) 2e6*kp 2e6*ki]; den=[0.264 2.64 0 0] Do I need to draw a graph or do a calculation? I see that some places draw step...; bszl Analog electronics

The difference between polymer tantalum capacitors and ordinary tantalum capacitors: Tantalum Capacitor Introduction The full name of tantalum capacitor is tantalum electrolytic capacitor (also called tantalum capacitor). It is a type of electrolytic capacitor. It uses metal tantalum ...; Jacktang Energy Infrastructure?

Expert help!!!: Design an amplifier using discrete components, powered by a single power supply. Specifications: Voltage gain>=40db Input resistance>=10k Output resistance<=500 —30db Bandwidth: 20HZ—20kHz Output rang...; s_smmo Embedded System

POLL problem of USB device descriptor: I polled several USB fd's POLLOUT events, and the event was generated without intervals, resulting in an infinite loop with no blocking point, and the CPU usage soared. When exactly does the POLLOUT e...; haifeng8689 Embedded System

SWD protocol confusion in simulator design: Hey guys, I'm a little confused about the SWD protocol, as follows: The protocol states that the debugger sends a read AP request packet, and the target chip gives an OK response and then immediately ...; whwshiyuan1984 MCU

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components