and One-Stage and Two-Stage and One-Stage and Two-Stage
Isolator
Isolator
Isolator
Isolator
Signal central wavelength,
λ
C
Signal wavelength range,
λ
S
Pump channel
wavelength range,
λ
P
Port configuration
Insertion loss at
λ
S
(note
3
)
Max.
Wavelength dependent
Max.
variation at
λ
S
and
C, L, or S bands (note
3
)
Wavelength dependent
Max.
variation at
λ
S
and
C+L band (note
3
)
PDL at
λ
S
(note
3
)
Max.
PMD at
λ
S
(note
3
)
Max.
Isolation of isolator
Min.
4
at
λ
S
(note )
Isolation of WDM
Min.
5
at
λ
P
(note )
Insertion loss (C to R) at
λ
P
Max.
PDL (C to R) at
λ
P
Max.
Directivity (P to R) at
λ
S
Min.
Directivity (R to P) at
λ
P
Min.
Optical return loss
Min.
Maximum optical
power (standard)
Maximum optical power
(high power option)
Tensile load
Max.
Operating temperature
Storage temperature
Package dimensions (D x L)
Fiber type
Pigtail color code (bare fiber)
Pigtail color code (loose tube)
Device marking
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1550 nm, L=1590 nm, 1=1570 nm, S=1510 nm)
C, L or S
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1530 to 1580 nm, L=1590±20 nm, 1=C+L=1530 to 1610nm, S=1490 to 1530 nm)
N/A
1465 to 1495 nm 1465 to 1495 nm 950 to 1010 nm
950 to 1010 nm
Backward
(note
1
)
Forward or
backward
(note
2
)
0.6 dB
0.2 dB
Forward or
backward
(note
2
)
0.6 dB
0.15 dB
Forward or
backward
(note
2
)
0.7 dB
0.2 dB
Forward or
backward
(note
2
)
See table on page 2 See table on page 2 0.5 dB
0.2 dB
0.2 dB
0.15 dB
NA
NA
0.25 dB
0.3 dB
0.25 dB
0.3 dB
0.1 dB
0.05 ps
30 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.2 dB
0.05 ps
42 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.06 dB
0.05 ps
30 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
5N
0.08 dB
0.05 ps
45 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
0.06 dB
0.05 ps
30 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
0.08 dB
0.05 ps
45 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
5N
5N
5N
-5 to 70 °C
-40 to 85 °C
5.5 mm x 32 mm for bare fiber and 5.5 mm x 40 mm for bare fiber or loose tube
PureMode Hi 1060 for ports transmitting 980 nm (standard), SMF-28 for all others (standard)
Black (C port); Clear (R & P ports)
Red (C port); Blue (R & P ports)
JDSU logo, JDSU model name and device serial number
Note: Parameters are specified for the signal wavelength range and/or pump wavelength range, all polarization states and operating temperature range without connector.
1
2.
3.
4.
5.
Backward tap: C (input), R (tap) and P (output).
Backward pumped: C (λ
S
input and
λ
P
output), R (λ
P
input) and P (λ
S
output). Forward pumped: C (λ
S
and
λ
P
output), R (λ
P
input) and P (λ
S
input).
Forward: P to C and Backward: C to P.
Forward: C to P and Backward: P to C. The isolation data are specified at 23 °C. The isolation range is
λc
± 12 nm or
λc
± 30 nm for one-stage or two-stage isolator, respectively.
Isolation of WDM is given for both C to P and P to C directions.
AHC SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: AHC-C30R10000
AHC-
Code
C
L
S
1
Signal Wavelength
C-band
L-band
S-band
C+L-bands
Code
J
K
N
Code
0
3
5
Pump Wavelength
No pump option
1480
nm
980
nm
Q
R
S
Code
0
1
2
3
4
5
A
T
Tap Ratio
No
tap
option
1%
2%
3%
4%
5%
1.8%
10%
V
Z
Isolator, Pump Configuration,
Package Length
One-stage, forward-pumped,
32 mm (L)
One-stage, forward-pumped,
40 mm (L)
One-stage, backward-pumped or
tap,
32 mm (L)
One-stage, backward-pumped or
tap,
40 mm (L)
Two-stage, forward-pumped,
40 mm (L)
Two-stage, forward-pumped,
32 mm (L)
Two-stage, backward-pumped
(or
tap),
40 mm (L)
Two-stage, backward-pumped
(or
tap),
32 mm (L)
Code
1
2
4
5
Fiber Pigtail Length
1 meter
2 meters
0.5 meter
1.5 meters
0
Code
0
1
2
3
4
5
8
9
A
B
C
Connectors
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
0
1
Fiber Buffer Type
250 µm bare fiber
900 µm loose
tube
Code
0
H
Power Handling Option
Standard:
150 mW at
980
nm
and 500 mW for
all others
High
Power:
450 mW at
980
nm
and 2000 mW
for all others
Note: Other configuratons and wavelengths are available on custom basis.
SMF-28 and PureMode are registered trademarks of Corning Incorporated.
ST and LC are registered trademarks of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
[size=4]If a device program is perfectly libraryized, it means: [/size] [size=4] 1. All engineers spend very little when porting or creating the device driver. [/size] [size=4] 2. As the number of use...
Capacitors are very important energy storage units in electronic systems and are an indispensable part of electronic applications. Therefore, knowledge about capacitors is the basis for becoming an en...
After a few days of adjustment, I finally got the NRF24L01 module working. Due to a mistake, I accidentally marked the wrong position of the RST pin, so I re-drew the circuit.This time, the back resis...
[font=微软雅黑][size=3]It is reported that Seiko Epson plans to close its factory in Shenzhen, China in March 2021, mainly due to rising labor costs, stricter environmental standards and sluggish sales of...
I found that many novices and many books have no rules for microcontroller C programming. I would like to post a naming rule for microcontroller C programming. I hope everyone can write C programs acc...
MP3 chargers are one of the most easily damaged accessories. After repairing many types of chargers, I found that they basically all use switching power supply circuits, and the circuit structures are...
On August 23rd, Geely's subsidiary, Jiyao Tongxing, announced it has the industry's largest advanced production capacity for tandao
batteries
, with eight production bases across China. Jiy...[Details]
When you are happily watching NBA or football, your wife asks you to turn off the lights in the bedroom. Would you be depressed? Of course, unless you are not afraid of your wife.
Now you are ...[Details]
The jammer is a signal blocker, mainly composed of a chip and a radio transmitter. When the car owner presses the remote control lock button, the jammer interferes with the electronic lock receivin...[Details]
Common Mode Semiconductor has officially released its latest generation of power management ICs—the GM6506 series. This fully integrated high-frequency synchronous rectification step-down p...[Details]
In the summer of 2025, BlueOval SK, a joint venture between Ford and SK On, officially started production at its first battery factory in Kentucky.
According to the original plan, this w...[Details]
introduction
As “energy conservation and emission reduction” has become an indicator of the National Economic Development Outline of the 11th Five-Year Plan, people’s awareness of green enviro...[Details]
In the scorching summer, electric fans are a must-have for cooling down people's homes. However, I believe most people have encountered this situation: the fan is plugged in, the switch is pressed,...[Details]
With the rapid development of electric vehicles in my country, people are beginning to pay attention to the issue of radiation from electric vehicles. We all know that mobile phones emit radiation,...[Details]
The practice of warming up a car originated with gasoline-powered vehicles. Warming up the engine allows it to enter a better working state and ensures good lubrication. This has become a habit for...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
Learned the following information.
Customer product: industrial computer motherboard
Glue application area: CPU/BGA filling
Glue color requirements: black or t...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
The fracture mechanism is stress concentration, which typically occurs at the capacitor lead pins or pad connection points, as shown in the figure. Under vibration, the capacitor lead pins and pad ...[Details]
introduction
In today's busy society, people experience chronic high stress, which in turn poses a significant threat to our health. Therefore, effectively relieving stress has become a pr...[Details]
Batteries are a core component of new energy vehicles, accounting for over 40% of the total cost. This is also the area where automakers are most willing to tamper with costs. Since 2021, domestic ...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
