PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Applications
•
•
•
•
High Performance Supertrunking Links
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
PONA 2100 Series Erbium Doped Fiber Amplifier
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Full Functionality 1 RU EDFA
Low Noise Figure (Typ < 5.5dB )
Total Input Power Range:
–10 dBm to +12 dBm
+14 dBm to +30 dBm Output Power
Optional Internal Optical Power Splitters
Standard RS-232 Communication
Key Lock Switch
Standard and Optional Gain Flatness
(1530nm - 1562nm)
VFD Panel Status Indicator
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFA’s is designed to meet the most
demanding noise performance requirements of CATV applications,
and performs all the functions required of an optical amplifier for
system integration.
PONA 2100 series EDFA’s provide optical
isolation on the input and output of the gain block for stable, low
noise operation. The input and output optical signal power levels
are detected for monitoring and control. The input optical signal is
amplified with active gain control for a constant output power level,
or with active output power control for constant gain mode. The
PONA 2100 series EDFA’s also provide monitors and associated
alarms for all vital characteristics. The optical output of the PONA
2100 series EDFA’s can be split into multiple ports by an optional
external splitter.
1 of 6
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
PONA 2100Series EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Optical / Electrical Characteristics
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Pin (dBm)
Pin (dBm)
Max
Min
+12
-10
14.0
Output Power
Noise Figure
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
Power Consumption
(steady state regime)
Po (dBm)
NF (dB)
GF (dB)
(dB)
(dB)
Psys (W)
Typ/Max
Max
Max
Max
Max
+/-.25
4.5/5.0
+/-0.5
+/-1
+/- 0.2
5
+12
-10
17.0
+/- .25
4.5/5.0
+/-0.5
+/-1.25
+/- 0.2
7
+12
-10
20.0
+/- .25
4.5/5.0
+/-0.5
+/-1.5
+/- 0.2
9
+12
-10
22.0
+/- .25
4.5/5.0
+/-0.5
+/-2.0
+/- 0.2
12
+12
-10
24.0
+/- .25
5.0/5.5
+/-0.5
+/-2.0
+/- 0.2
20
+12
-10
27.0
+/- .25
5.0/5.5
+/-0.5
+/-2.0
+/- 0.2
35
+12
-10
30.0
+/- .25
5.5/6.0
(Note 7)
(Note 7)
+/- 0.2
40
(Note 2)
(Notes 3, 8)
(Note 4)
(Notes 5, 8)
(Note 6)
50
o
C Case
Typical
(May vary for
some models)
SYMBOL
(UNITS)
LIMIT
2114
2117
PONA MODELS
2120
2122
2124
2127
2130
COMMENTS
(Note 1)
Notes
:
1)
2)
3)
4)
5)
6)
7)
8)
Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges
Measurement variations
Measured with 8 evenly spread input optical signals @ 25°
C, Pin 0 dBm (Measuring with 1 input optical signal with Pin 0 dBm
and
λ
1550 nm is also possible. (Low Noise Figure options with NF 4.0/4.5 dB are available for some models)
Measured with a swept Probe Signal (Pp), where Pp 0 dBm @ 25°C
Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt Pp+20 dB; Pt + Pp 0 dBm) @ 25°C;
Gain Flattened Options with G +/-0.75dB or G +/-1.0dB are available (for some models)
Over polarization and temperature
Static and Dynamic Gain Flatness for PONA 2130 can be defined for 1545 nm
λ
1562 nm and by special request only. (Please
contact your Sales Representative)
Specific NF and G can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) different from 0 dBm.
(Please contact your Sales Representative for more information)
General and Mechanical Specifications
PROPERTY
GENERAL
Operating Wavelength
PONA 2114 – PONA2127
PONA 2130
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
1530 ~ 1562 nm
1545 ~ 1562 nm
-10°C to 55°C
-40°C to 85°C
20% to 85%
100 VAC to 240 VAC 50/60 Hz
-36 to –60 V DC
Optical Connectors
Dimensions In Inches
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Standard
Standard
Standard
Standard
Non-condensing
Standard
Optional
User Specified
19’’ Rack Mounted, 1U
REQUIREMENT
COMMENTS
2 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA 2100 Series EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Outline Drawing
DC & AC versions shown below with 8 output port option
3 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA 2100 Series EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2
Electromagnetic Compatibility for equipment.
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
4 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA 2100 Series EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a
Class IV laser product based on the maximum optical output power shown below. During use
as intended, the laser energy is fully contained within the fiber network such that there is no
accessible laser radiation and would meet the requirements for a Class I laser product. The
laser product report has been submitted to the CDRH and the accession number is expected
by October 2006.
Wavelength = 1530 ~ 1561 nm (dependant on input source)
Maximum Output Power = 1.0 W (single output, 30 dBm model)
5 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
京公网安备 11010802033920号
EEWORLD
