INC.
SERIES ET
LOW PROFILE
SPEAKER STROBES
Description
ET high performance speaker strobe combinations are
specifically designed to meet the critical needs of the life
safety industry for voice and tone signaling. These dual
voltage (25/70 volt), multiple tap (from 1/8 to 8 watts)
speakers incorporate a low profile design which results in
more space in electrical backboxes.
The Series ET Speaker Strobes incorporate a speaker
mounting plate for faster and easier installation with a built-
in level adjustment feature along with an aesthetic two (2)
screw grill cover. Additionally, the Series ET Speaker Strobe
models incorporate the Low Current, Zero Inrush, Series
RSS Non-Sync/Sync Strobes (synchronization of the strobe
flash is achieved when used with SM or DSM Sync Module
or FF8 Power Supply) .
Series ET Speaker Strobes are designed with maximum
performance, reliability and cost-effectiveness while meeting
or exceeding the latest requirements of NFPA 72 (National
Fire Alarm Code), ANSI 117.1 (American National Standard
of Accessible and Usable Buildings and Facilities) and UL
Standard 1971 (Standard for Signaling Devices for the
Hearing Impaired). ET Speaker Strobes, when properly
specified and installed in accordance with NFPA/ANSI
Standards, can provide the Equivalent Facilitation allowed
under ADA Accessibility Guidelines (ADAAG General Section
2.2) by meeting or exceeding the illumination which results
from the ADA specified strobe intensity of 75 candela at 50
feet. This is an illumination of 0.030 lumens per square
foot. Series ET Speaker Strobes are UL Listed for indoor
use, ceiling and wall mount, under Standard 1971 for
Signaling Devices for the Hearing Impaired and Standard
1480 for Speaker Appliances, and use a Xenon flashtube
with solid state circuitry enclosed in a rugged Lexan lens to
provide maximum reliability for effective improved audibility.
The Series ET weatherproof model can be used not only in
outdoor applications but also in damp indoor locations as
well such as clean room and food storage facilities. The
Series ET weatherproof model incorporates an
environmentally adaptive strobe. Candela output vary from
88.3CD to 212CD over a temperature range of 31
o
F to 150
o
F.
Approvals
UL Standard 1971 and UL Standard 1480 Listed, FCC Part
15, California State Fire Marshal (CSFM), New York City
(MEA) and Chicago (BFP) Approved.
Features
• Low Profile Design.
• Unique Speaker Mounting Plate.
• High efficiency speakers designed for maximum output
at minimum wattage across 400 to 4000 HZ frequency
range.
• Field selectable taps for 25 or 70 VRMS operation from
1/8 watt up to 8 watts in 3 dB steps.
• Sealed back speaker construction for extra protection
and improved audibility.
• Easy installation with IN/OUT screw terminals using
#12 to #18 AWG wiring.
• Series ET Speaker Strobe models are available with the
SeriesRSS Non-Sync/Sync Strobes in 15, 15/75, 30, 75
and 110 candela for wall mount and 15, 30, 75 and 100
candela for ceiling mount.
• The 15/75 candela wall mounted strobes are listed at
15 candela under UL Standard 1971 and meet 75
candela intensity on axis for ADA guidelines, with low
current draw.
• All strobe inputs compatible with standard reverse
polarity type supervision of circuit wiring by an alarm
panel.
• Designed to meet or exceed NFPA/ANSI Standards and
ADA Accessibility Guidelines. Meets OSHA 29 Part
1910.165.
• Unique weatherproof model available
CS-2241 Rev. 1102-6
Page 1
Ordering Information
Part Number
Description
Field Selectable Taps for 25 or 70 VRMS Operation, From 1/8 Watt to 8 Watt, 24V
72043
Selectable Candela Speaker Strobe, Square, Wall Mount, 24VDC, Red (ET70-24MCW-FR)
72044
Selectable Candela Speaker Strobe, Square, Wall Mount, 24VDC, White (ET70-24MCW-FW)
71606
75CD Speaker Strobe, .200 Amp, Vandal Resistant Grille, Square, Wall Mount, Red (ET-
1080-IS-24-VFR)
71607
15CD Speaker Strobe, .074 Amp, Vandal Resistant Grille, Square, Wall Mount, Red (ET-
1080-LS-24-VFR)
71608
15/75CD Speaker Strobe, .100 Amp, Vandal Resistant Grille, Square, Wall Mount, Red (ET-
1080-LSM-24-VFR)
71609
30CD Speaker Strobe, .124 Amp, Vandal Resistant Grille, Square, Wall Mount, Red (ET-
1080-MS-24-VFR)
71438
15/75CD Speaker Strobe, .138 Amp, Vandal Resistant Grille, Synchronized Strobe, Square,
Wall Mount, Red (ET-1080-SLM-VFR)
71737
15/75CD Speaker Strobe, .065 Amp, Square, Wall Mount, 24VDC, Red (ET70-241575W-FR)
71740
15CD Speaker Strobe, .072 Amp, Round, Ceiling Mount, 24VDC, White (ET90-2415C-FW)
71741
30CD Speaker Strobe, .102 Amp, Round, Ceiling Mount, 24VDC, White (ET90-2430C-FW)
71742
75CD Speaker Strobe, .205 Amp, Round, Ceiling Mount, 24VDC White (ET90-2475C-FW)
71743
100CD Speaker Strobe, .238 Amp, Round, Ceiling Mount, 24VDC White (ET90-24100C-FW)
72243
75CD Speaker Strobe, .102 Amp, Weatherproof, Round, Wall Mount, 24VDC, Red
(ET70-WP-2475W-FR)
Mounting Accessories for ET Series Speaker Strobes
70418
68593
71643
71139
71317
71318
68292
Backbox, Surface Mount, 5-1/2" x 5-9/16" x 3-9/16", Red (SBB-R)
Backbox, Surface Mount, 4" Square x 2-3/16"D, Red (DBB-R)
Backbox, Surface Mount, 10-15/16" x 6-7/64" x 1-11/16", Red (SBL2-R)
Backbox, Molded Surface, 5-1/4 “ x 5-1/4” x 2-5/8", Red - use with #72243 (IOB-R)
Molded Extender, 5-1/4" Square x 25/32"D, Red (ISP-R)
Retrofit Plate, 8" x 5-7/8" x 13/32", Red (RP-R)
Plate, Semi-Flush, 6" Square x 5/16"D, Red (SFP-R)
Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell assumes no
responsibility for their use. Data and design are subject to change without notice. Installation and wiring instructions shipped with the
product shall always be used for actual installation. For more information, contact Gamewell.
The Gamewell Company
60 Pleasant St.
Ashland, MA 01721
Made in the USA
Voice (508) 231-1400
888-FIREBOX • (888) 347-3269
FAX (508) 231-0900
www.gamewell.com
Gamewell 2002
CS-2241 Rev. 1102-6
Page 2
DIY/Open Source Hardware
京公网安备 11010802033920号
EEWORLD
